Sunsitt ST-018 User manual

sku:ST-018
3-Pieces
Conversation Set
W
A
R
R
A
N
T
Y
1
Y
E
A
R
1
Thank you for choosing Sunsitt!
Our goal is to provide high quality outdoor furniture with
outstanding customer service-all at an affordable price.
Please let us know how we are doing!
Problems?
(Missing pieces, wrong pieces...)
We will fix it Immediately. Send us an email at
[email protected]. If you are not satisfied with our
customer service, pls send your comments to
[email protected].
Happy?
Please leave us a review!
You can make others happy too!
SU NSIT T
www.sunsitt-patio.com

IMPORTANT, RETAIN FOR
FUTURE REFERENCE:
READ CAREFULLY.
Safety
For domestic use only.
Don't tighten all the bolts before the product is fully assembled.



Periodic structural checks of this product should be
It would be useful to ask someone to help you assemble
the product.
undertaken, do not use if you have any doubts about its
Do not stand on the seat.
Do not sit on the armrest.
Do not let children play with this product.
Maximum load per seat: 250 lbs.
At the beginning of the season

product are secure, do not use if you have any doubts
At the end of the season
This product should be stored under cover during
prolonged spells of adverse weather (wet or cold) and
also during the winter (ideally in a garden shed or
garage).
Always clean and dry thoroughly before storage.
- 1 -
SU NSIT T

Tips for Cushions
1
3
OK
2
In order to compress the package, we put the cushions in
the gap of some parts. So there may be crinkle on the fabric.
Don’t worry. Just flap every corner of the cushion evenly and
it will get back into its original shape soon.
- 2 -
SU NSIT T

- 3 -
Item
no.
Reference
Image Description Qty.
A
B
C
D
E
F
G
H
J
Seat Base
Seat Back
COMPONENT LIST - ARMCHAIR
Washer
Right Armrest
Left Armrest
1
1
1
1
1
1
8
8
1
M6X30
Head Cap Screws
Seat Cushion
Back Cushion
Allen Key
SU NSIT T

NOTE:
When tightening the screws, tighten sequentially.
DO NOT tighten any screws fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned,loosen the
screws and execute this same process.
If the Chair is not stable it could lead to damage to the product.
1
2
- 4 -
Attach the Seat Base (C) to the Right Armrest (A) by securing with Head cap
screws (H) and Washers (G). Hand tighten to line up 2 pieces. Pls don’t fully
tighten in this step. Do this in 2 places.
Attach the Seat Back (D) to the Right Armrest (A) and Seat Base (C) by securing with
Head cap screws (H) and Washers (G). Hand tighten to line up all the pieces. Pls
don’t fully tighten in this step. Do this in 2 places.
C
A
G
H
x2
D
x2
G
H
SU NSIT T

3
4
- 5 -
Note: If any screw holes cannot
be aligned, loosen all the screws
and go back step 1 and restart assembly.
Attach the Left Armrest (B) to the Seat Back (D) and Seat Base (C) by
securing with Head cap screws (H) and Washers (G). Do this in 4
places. Then tighten all 8 screws into place with Allen Key (J).
Place the chair on a level surface, then place Seat Cushion (F)& Back
Cushion (E) on the chair. Your chair is ready for use.
B
G
H
x4
F
E
SU NSIT T

Seat Cushion
Back Cushion
- 6 -
Item
no.
Reference
Image Description Qty.
K
L
M
N
Y
E
P
G
Right Panel
Left Panel
Seat Base
Seat Back
Bottom Panel
COMPONENT LIST - ARMLESS CHAIR
1
1
1
1
1
1
1
12
Washer
SU NSIT T

NOTE:
When tightening the screws, tighten sequentially.
DO NOT tighten any screws fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned,loosen the
screws and execute this same process.
If the Table is not stable it could lead to damage to the product.
1
Attach the Panels (K)& (L) to the Seat Back (M) by securing with Head cap
screws (H) and Washers (G). Hand tighten to line up all the pieces. Pls don’t
fully tighten in this step. Do this in 4 places.
- 7 -
Item
no.
Reference
Image Description Qty.
H
J
COMPONENT LIST - ARMLESS CHAIR
12
1
M6X30
Head Cap Screws
Allen Key
M
K
G
L
H
x4
SU NSIT T

- 8 -
2
Attach the Seat Base (N) to the Panels (K)& (L) and Seat Back (M) by securing
with Head cap screws (H) and Washers (G). Hand tighten to line up all the
pieces. Pls don’t fully tighten in this step. Do this in 4 places.
x4
N
G
H
SU NSIT T

Note: If any screw holes cannot
be aligned, loosen all the screws
and go back step 1 and restart assembly.
3
Attach the Bottom Panel (O) to the Panels (K)& (L) by securing with
Head capscrews (H) and Washers (G). Hand tighten to line up all the
pieces. Pls don’t fully tighten in this step. Do this in 4 places. Then
tighten all 12 screws into place with Allen Key (J).
4
- 9 -
Place the chair on a level surface, then place Seat Cushion (P)& Back
Cushion (E) on the chair. Your chair is ready for use.
Y
x4
G
H
E
P
SU NSIT T

- 10 -
Item
no.
Reference
Image Description Qty.
Q
R
S
G
T
Table Top
COMPONENT LIST - ARMLESS CHAIR
Table Leg
Glass
2
1
1
8
4
4
1
Washer
H
J
M6X15
Head Cap Screws
M6X30
Head Cap Screws
Allen Key
SU NSIT T

NOTE:
When tightening the screws, tighten sequentially.
DO NOT tighten any screws fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned,loosen the
screws and execute this same process.
If the Table is not stable it could lead to damage to the product.
1
- 11 -
Attach the Table Legs (Q) to the Table Top (R) by securing with Head cap
screws (H)&(T) and Washers (G). Do this in 4 places. Then tighten all 8 screws
into place with Allen Key (J).
Q
G
T
x4
G
H
Q
R
SU NSIT T

2
Place the table on a level surface, then place the Glass (S) on the
table. Your table is ready for use.
- 12 -
S
SU NSIT T