Sunsitt ST23007-002 User manual

Components
3
Fittings
Seat x 1 Teak Leg x 2 Back Cushion x 2
A B C
www.sunsitt.com
Assembly Instructions
2
ASSEMBLY AND CARE INSTRUCTIONS
BEFORE YOU BEGIN: FOR YOUR SAFETY
CARING FOR SUNSITT SIGNATURE
Product Details
SKU: ST23007-002
PLEASE READ BEFORE ASSEMBLING FURNITURE.
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
• Keep children and animals away from the work area, small parts could cause
choking if swallowed.
• Two-person assembly is recommended.
• Make sure you have enough space to lay out the parts before starting.
• Check that you have all the components and tools listed in this booklet before
starting assembly.
• Remove all fittings from their plastic bags and separate them into their groups.
• Assemble on a soft, level surface to avoid damaging the unit or your floor.
• Do not stand or put weight on the component parts during assembly, as this
could cause damage.
• Assemble the item as close to its final position as possible.
• Dispose of all packaging materials carefully and responsibly.
• Sunsitt Signature cleans quickly and easily. Simply use a damp cloth and mild
detergent; do not use bleach or abrasive cleaners.
• To prolong the life of Sunsitt Signature patio furniture, we recommend storing
it inside during winter or extended periods of bad weather.
Locate the lever as shown.
Slide the lever to the Position A (Left) to tighten the screws.
Slide the lever to the right Position B (Right) to loosen the screws.
Tip:
The ratchet head can be used as a finger ratchet.
Finger tighten by turning clockwise to speed up the process.
Washer x 8
D
35mm Screw x 8
E
Allen key x 1
F
Position B (Right)
Ratcheting Allen tool instructions
Position A (Left)
Loveseat
10
mins
1
TIME PEOPLE DIFFICULTY

54
www.sunsitt.com
[email protected]
1
ASSEMBLY INSTRUCTIONS - LOVESEAT
ASSEMBLY COMPLETE
Your furniture is ready to use.
3
ASSEMBLY INSTRUCTIONS - LOVESEAT
Repeat
x 4
B
C
C
B
A
D
E
2
Once the legs have been attached, carefully flip the loveseat over and
place the back cushions (C) on the loveseat.
Turn
Product
Note: Teak legs for loveseat should be put outwards.
Important:
Do not fully tighten all screws until assembly is complete,
as some screw holes won't line up and make it difficult to
assemble.