Mocka Kent User manual

mocka.co.nz I mocka.com.au
Kent
Ladder Desk
Thank you for purchasing a Mocka . Please follow the Kent Ladder Desk
manufacturer’s assembly instructions in detail to ensure the safety
features of the not compromised.Desk is
A
screw 25mm
x4
B C D
Phillips&Flatheadscrewdriversrequired.
Forquickerassembly,werecommendthe
useofapowerdrillonalow-speedsetting.
WARNING: This furniture item can become unstable and may topple if climbed upon
and can be especially dangerous to children. Serious injury or death may result.
It is undesirable to place objects of interest to children in view on this type of
furniture item, as children may be tempted to climb to retrieve the objects the result
being that the furniture item may tip and cause injury or death.
This furniture item meets the requirements of AS/NZS 4935. However, even furniture
items that meet these requirements can tip under certain circumstances, especially when
placed on carpet, uneven or sloping flooring, or when subject to extreme use.
Attachment of the furniture item to an appropriate structural component of the building
using suitable means, as advised by a qualified tradesperson, is strongly recommended even
for those furniture items meeting the suitability requirements of AS/NZS 4935.
G1 G2
G3
G4
bolt & nut
x28
wall plug
x2
slide rail
x2
dowel
x18
E
FGHI J
K L M N O
screw 40mm
x2 screw 50m
x28
screw 14mm
x48 x4 x4
screw 18mm
x6
screw 25mm
x6x2
plastic clip plastic clip
bracket wall strap
×2

mocka.co.nz I mocka.com.au
1 2
Kent
Ladder Desk
①Insert 4 × nuts (A) into panels (4) and (6).
②Attach 1 × slide rail (G1) to panel (4) with 2 × screws (F).
③Attach 1 × slide rail (G3) to panel (6) with 2 × screws (F).
46
F
F
FF
G1 G3
G1 G3
46
A
A
A
5
A
A
5
F
F
G3
G3
5
F
F
G1
G1
①Insert 2 × nuts (A) into panel (5).
②Attach 1 × slide rail (G3) to the left side of panel
(5) with 2 × screws (F).
③Then turn out panel (5), attach 1 × slide rail (G1)
to the right side of panel (5) with 2 × screws (F).
ip

mocka.co.nz I mocka.com.au
34
Kent
Ladder Desk
①Insert 2 × nuts (A) into the back of panel (7).
②Attach panels (4), (5) and (6) to panel (7) with 3 ×
screws (E).
③Attach frame (21) to panel (5) with 1 × screw (E).
A
A
A
A
A
A
A
A
3
Insert 8 × bolts (A) into panel (3).
6
5
4
E
E
E
E
A
A
21
7
7

mocka.co.nz I mocka.com.au
56
Kent
Ladder Desk
3
4
7
B
B
B
B
B
B
Attach panel (3) to panels (4), (5) and (6) with 6 ×
dowels (B). Insert 12 × bolts (A) and 12 × dowels (B) into panels (1)
and (2).
A
A
A
A
A
A2
B
B
B
A
A
A
A
A
A
B
B
B
1
5
6

mocka.co.nz I mocka.com.au
78
Kent
Ladder Desk
10
A
A
A
A
9
A
A
A
A
A
A
A
A
8
Insert 12 × nuts (A) into panels (8), (9) and (10). Attach panels (8), (9) and (10) to panel (2) with 6 × bolts (A) and 6
× dowels (B).
2
8
9
10
A
A
A
A
A
A
B
B
B

mocka.co.nz I mocka.com.au
910
Kent
Ladder Desk
11
Slide panel (11) into the position. Attach panel (1) to panels (8), (9) and (10) with 6 × bolts (A)
and 6 × dowels (B).
8
9
10
1
BA
A

mocka.co.nz I mocka.com.au
11 12
Kent
Ladder Desk
12
HF
F
F
I
F
12
12
Attach 4 × plastic clip (H) and 4 × plastic clip (I)
to panels (12) with 32 × screws (F) as shown. Make sure the clips are pushed down when putting
panels (12) into the cabinet then push up to secure.

mocka.co.nz I mocka.com.au
13 14
Kent
Ladder Desk
8
J
K
Insert 6 × screws (K) and 6 × screws (J) into panel (8). ①Attach panel (16) to panels (14) and (15) with 4 × screws (E).
②Slide panel (17) into the position as shown.
③Attach panels (13) and (18) to panels (14) and (15) with 4 ×
nuts (A) and 4 × bolts (A).
13
18
14
15
14
15
16
17
A
A
E
E
E
E
A
A

mocka.co.nz I mocka.com.au
15 16
Kent
Ladder Desk
14
15
15
14
F
G4
G2
F
F
FC
E
E
E
E
E
E
E
E
C
D
N
20
20
19
21
Attach slide rails (G2) and (G4) to panels (14) and (15)
with 4 × screws (F). Attach frames (20) and the cabinet to the main frame (19)
with 2 × screw (C), 1 × screw (D), 1 × screw (N) and 8 ×
screw (E) as shown.

mocka.co.nz I mocka.com.au
17
Kent
Ladder Desk
18
E
EE
E
E
E
E
C
N
EC
N
D
L
M
13
18
19
20
20
21
Attach frames (20) and the cabinet to the main frame
(19) with 2 × screw (C), 1 × screw (D), 1 × screw (N)
and 8 × screw (E) as shown.
①Insert the drawers into the cabinet as shown.
②Once assembled lift furniture into place, do nor drag. Use a drill
to create a small hole lining up with the top of the 2 × safety
strap (N). Fasten to the wall using 2 × wall anchors (M) and 2 ×
screws (L). Ensure unit is balanced and steady before use.