4
Table of contents
1. Safety rules for machine ..................................................................................................... 6
1-1) Machine Transportation ......................................................................................................... 6
1-2) Machine Installation ............................................................................................................... 6
1-3) Machine Repair ...................................................................................................................... 6
1-4) Machine Operation ................................................................................................................. 7
1-5) Devices for safety .................................................................................................................. 7
1-6) Location of Caution mark ...................................................................................................... 8
1-7) Contents of Caution mark .................................................................................................... 8
2. Specifications .......................................................................................................................... 9
3. Structure ................................................................................................................................. 10
1) Names of each machine parts ................................................................................................ 10
4. Installation .............................................................................................................................. 11
1) Machine installation conditions ............................................................................................... 11
2) Electric installation conditions ................................................................................................ 11
3) Safe installation of the tables .................................................................................................. 11
4) How to install the table (BA type) ............................................................................................ 14
5) The assembly of peripheral parts ............................................................................................ 16
6) Installation of air pressure specification (HA type) .................................................................. 17
7) Installation and control of the option wiper (HA type) .............................................................. 20
8) Installation of the vent hole [SPS/D(C)-B1201M (HP)] ............................................................ 22
9) Installing the needle cooler ..................................................................................................... 23
5. Preparations before using the machine ..................................................................... 25
1) Lubrication ............................................................................................................................... 25
2) Installation of the needle ......................................................................................................... 26
3) Routing the upper thread ........................................................................................................ 27
4) Placing the lower thread .......................................................................................................... 27
5) Installation and separation of the bobbin case ........................................................................ 27
6) Tension control of the upper and lower threads ...................................................................... 28
7) Winding the lower thread ....................................................................................................... 28
8) Operation of the pedal (H, M, L, K types) ................................................................................ 29
9) Operation of the pedal (HA type) ............................................................................................ 29
10) Disposal of the waste oil ....................................................................................................... 29
11) Input of the compressed air and control of the air pressure (HA type) .................................. 30
12) Control of the upper thread holding device (optional) ........................................................... 30
6. Maintenance and repair .................................................................................................... 31
1) Adjustment of the needle bar height ....................................................................................... 31