LOAD SHEDDER 1000 & 200010
6. MANUFACTURER’S WARRANTY
TERMS AND CONDITIONS
1) Global Tech China Limited and Sunsynk Limited (from now on “the Company”) now warranty against manufacturing faults of the
products for two years under the following terms and conditions:
a) The product must be purchased and installed within one of the following countries: The United Kingdom, the Isle of Man, the Channel
Islands, South Africa, Zimbabwe, Botswana, Hong Kong, and Australia. Products purchased and/or installed outside of these countries
will not be covered by this warranty under any circumstances.
b) The product must be installed and commissioned in full compliance with the installation instructions provided with the product
packages. The product must also meet the requirement of the Benchmark initiative (if applicable).
c) The warranty period will commence from the date of purchase. However, if the purchase is made after more than six months from
the date on which the product was dispatched by the company, the warranty period will commence immediately after six months from
the date of manufacture.
d) The product must be conned to domestic or light commercial use only. For this warranty, “light commercial use” is referred to as a
semi domestic-commercial environment including but not limited to hair salons, small shops, pubs). Should confusion arise regarding
the determination of “light commercial use” the decision on the determination of the company will be nal.
e) The product must be well-maintained following the User Manual guidelines. Failure to maintain the product, poor servicing, or no
servicing of the products might invalidate this warranty. Proof of service by competent servicing centres might be required to obtain
warranty facilities.
f) During the warranty period, the product must not be serviced, repaired, or altered in by any third party. Any change, alteration,
modication, or servicing whatsoever from anyone other than the company will invalidate the warranty with full effect.
g) Following the servicing, repair, or replacement, any parts or products removed from your product will be taken as owner by the
company. You will not have any claim for such parts or products.
2) Warranty Limitations
This warranty does not include:
a) Any condition resulting from other than ordinary residential wear or any use for which the product was not intended, such as use in
rental or contract trade or commercial use;
b) Any condition resulting from incorrect or inadequate maintenance or care
c) Damage resulting from misuse, abuse, negligence, accidents, theft, tempering, ood, explosion, lightning, storms, frost, shipping
damage, adverse weather or any other similar event;
d) Dissatisfaction due to buyer’s remorse;
e) Normal wear and tear;
f) Damages incurred during transportation;
g) Damages incurred during assembly or maintenance (unless assembly or maintenance has been carried out by the company);
h) Any unauthorized adjustments made to the product by a third party;
3) The company makes no express warranty or condition, whether written or oral, and the company expressly disclaims all warranties and
conditions not stated in this limited warranty. The company disclaims all implied warranties or conditions, including any implied warranties
ofmerchantabilityandtnessforaparticularpurpose.
4)Allwarrantyclaimsmustbeledbytheconsumertotheretailerofthisproduct,whointurnistocontactthemanufacturerregarding
any warranty return or replacement. The company will not handle claims from the consumer directly. Please retain invoices for obtaining
warranty facilities.
5) All claims under this Warranty Statement must be made within the warranty period.
6)Thedecisionofthecompanyregardinganyissuerelatingtothiswarrantystatementisnal.
For more information, training videos, software upgrades, help line, forum please refer to http://www.sunsynk.com - Tech Support (Do not forget to
register rst on the website).
