suntouch PM-653 User manual

Quick Set-up Guide
1 © 2015 SunTouch
Snow Melting Control PM-653
1. Location 2.Remove Mounting Base
3.Install Mounting Base
Interior
Wall
5 feet
1.5 m
Exterior
Wall
Behind
Door
4.Switch Settings
5.Wiring
Back of
Control
LOCK ACCESS LEVEL
The control is locked and the access level
cannot be changed. Set to Lock when
installation has been completed.
UNLOCK ACCESS LEVEL
The control is unlocked and the access
level may be changed. Go to the Toolbox
menu to change the access level. Set to
Unlock during the installation process.
1058-06
Switch
Settings
Lock
Unused
Unlock
12
Snow / Ice
Sensor PM-090
Outdoor
Sensor
PM-070
Slab Sensor
PM-072
Slab
Brn Slab Brn
Com
BlkYel Blu Red
Com
BlkYel Blu Red
Or And/Or
24V C PM
Snow Sensor
PM-095
ProMelt
Contactor Pro
CP-50,
CP-100,
CP-200
Snow
Sensor
095
Slab
BrnHt RC
Out
Com–
BlkYel Blu Red
This Quick Set-up Guide is not intended to provide full installation instructions
and safety information. In order to avoid property damage or injury, please
refer to the complete installation manual and product safety information
provided with the product.
Base Stud
Base
Stud
3 ¼"
(83 mm)
Electrical
Box

IS-ST-PM653 1512 © 2015 SunTouch
USA: Tel: [phone] • Fax: [phone]
Canada: Tel: [phone] • Fax: [phone]
Latin America: Tel: [phone] • Fax: [phone]
SunTouch.com
A Watts Water Technologies Company
6. Install the Control
7. User Interface
8.Critical Settings
Item Field Description
SNOW / ICE SENSOR
Select if a Snow / Ice Sensor PM-090, or Snow Sensor PM-095 is installed.
Default = 090
SLAB SENSOR
Select if a Slab Sensor PM-072 is installed to measure the slab temperature.
Default = ON
MAXIMUM MELT TIME
Select to limit the amount of melting run time.
Default = 3.0 days
The System Menu provides settings on how to configure and operate the mechanical equipment.
Front
Base
Home
Button
ENTER
Home Button
Return to the
Home Screen
Press and hold for 3
seconds to access the
programming menus.
Touch to go to the
next setting
Touch to quickly enter
the View menu
Touch to
adjust settings
Operation
Field
Status Field
Touch to display
Run Time,
Outdoor & Slab
Temperature
Touch to
Melt or Stop
Touch to turn system
off while away