Sunway SW-06JL User manual

HD Mirror DVR
jason



1
AppearanceandKeyFunctionDescription
1
2
3
4

2
1. Screen
2. Buttons
3. Bandages
4. Interfaces
5. Len
6. Power button
7. Menu Button
8. Mode Button
9. Up/ lens switching
10.Down/ Silent mode
11.OK/Recording/Shooting/Playing Button
12.USB interface/5V power input
13.AV input
14.TF card slot
15.GPS interface

3
Details:
1, Power key/screen backlight button
ON/OFF function
In shutdown mode , long press [Power Key] and hold for 3 seconds to turn on the
machine, the machine will start working automatically. In the boot mode, long
press the [Power Key and hold for 3 seconds, the machine will save video files,
and user settings automatically and shut down.
2, Up/ lens button
Up function
It work as a ‘UP’button in the menu settings and playback modes.
Lens switching function
After connecting rearview camera, the screen will show dual cameras images
automatically. will automatically display the screen. In recording/Camera mode,
short press [Up] key can switch among with turn the front camera, rear camera,
PIP;
3, OK/Recording/Shooting/Playing Button
In recording mode, short press [OK] button can start recording, short press
again can stop recording.
Shooting button. In shooting mode, short press [OK] button can take pictures
File playing button. In file browsing mode, short press [OK] button can
Play/pause video.
Confirm button
In the standby state of recording mode / camera mode / Playback mode.
short press [MENU] button to enter the menu mode. Short press [Up/ down
key] to browse. And short press [OK] button to confirm.

4
4, Down/ forward button /Silent mode
Down function
In the menu settings and playback mode, it used as [Down] function.
Forward button
In Playback mode, short press [Down] can forward the video.
Silent mode
In standby/recording mode, short press [Down] can open/close Silent mode,
the icon on the top right corner will have corresponding changes.
5, Menu/ Mode button
Menu Functions
In standby mode, long press [MENU] button to enter the main menu function
settings; short press [Up] or [Down] keys to select the desired option settings;
short press [OK] button to confirm. After setting, short press [MENU] until you
exit the menu setup function. (it’s same setting way for recording model and
shooting model). In playback mode, long press the [Menu] key to delete files.
Mode switching function
In standby mode, short press the [mode] key to switch among with different
modes (video / shooting/ playback).

5
Function Instructions
1. Loop recording functions

When start the car engine, the recorder will start the recording function
automatically, the charge indicator lighting, and the recording light blinks. When
turn off the engine, the recorder will save record contents and shut down
automatically. The video files will be saved in the TF card in segmentation. The
recorder will overwrite earlier video files when TF card is full. The recording
time can be set in Menu, ranging from 1 minute / 2 minutes / 3 minutes.
[Note]
A, No matter which time segmentation you select, when TF card is full, the
recorder will cover the earlier recorded image.;
B, Front/rear’s video are stored in the Folder DCIMA" and "DCIMB" of TF
card.
2. Manual starting function
Long press the [Power Key] for 3 seconds, the recorder starts and begins
recording automatically, the icon shows the recording length. Press [Power Key]
for 3 seconds again, the recorder will save the video and shut down
automatically.
3. Shooting functions
In the boot state, short press the [mode] button to enter the camera mode, the
shooting icon will show on the top left corner of screen, short press [OK] button
to take pictures. To switch back to the recording mode, short press the [mode]
key twice.
4. The collision reaction Function
The machine has built-in G-sensor. In a serious vehicle collision, the recorder
will lock the image when the accident occurred and save it as a special image
(long cycle length is same with the recording time.), and the lock icon will show
above. The locked video will not be covered.
[Note]
a. the locked video file is SOS files
b. G-sensor support sensitivity adjustment, it can be set according to the actual
need.

6
5. Date and time settings
In standby mode, long press [MENU] to enter the system setup menu, short press
[Up] / [Down] keys to move the cursor to set the date options. Short press [Enter]
to enter the menu settings. Move and short press [OK] button when you set the
year/month/day/hour .press [Up] / [Down] to digital subtraction. Press [MENU]
to exit.
[Note]
In order to get efficient recording date and time of the traffic accident forensics, ,
please set correct date and time before using the machine.
6. Mute function
In working condition, short press the [Down] key, the microphone icon become
prohibit icon, indicating that the video recording turned off. At this time, the
recorder only records the image without sound. Short press the [Down] key again,
the microphone icon shows again, indicating resume recording with voice.
[Note] Settings will be saved automatically, and no need to set Mute function.
7. USB mode
Connect the recorder to a computer with a USB cable, the screen displays
"Memory", "PC Camera" two options. Short press [Up] / [Down] keys to select
"Memory", then press [Enter] to enter the memory mode.
8. Shooting file playback
Boot state press the [mode] key twice to switch to playback mode. Short press
[Up arrow key] / [DOWN key], locate the file you want to play back, press
[Enter] to play / pause. Long press [MENU] appears whether to delete the file.
Short press [mode] key can quit the playback mode.
9. GPS function
(this interface is reserved interface, it does not support this function)
10. Rear view camera
First, connect the car charger with the recorder, and connect the dark red wire of
camera with reversing light. Inserting car charger machine will automatically
start recording, if there is reversing in any state, reverse image will show on the
screen. After reversing, it will return to recording mode automatically.

7

11. Parking Monitoring
When start parking monitoring, in the off state, if the car has a slight vibration,
the recorder will automatically start recording. If in flameout state, the recorder
will recording for 10 seconds then shut down .