SupaWarm SCH2000T User manual

2000 Watt Turbo
Convector Heater
INSTRU
C
TION MANUAL

Feet Handle
Thermostat Knob Air Outlet Grid
Power Switch Air Inlet Grid
Before using the heater, the feet (supplied
separately in the carton), must be fitted to
the unit. These are to be attached to the
base of the heater using the 4 self-tapping
screws provided, taking care to ensure that
they are located correctly in the bottom
ends of the heater side mouldings.

RATING
AC 220-240V ~ 50Hz, 1800-2000W.
Ensure that the voltage indicated on the identification plate
corresponds with the mains voltage.
Please read these instructions fully before use.
WARNING! This appliance must be earthed.
THE HEATER MUST BE POSITIONED UPRIGHT.
IMPORTANT INFORMATION
FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH
EC DIRECTIVE 2002
/
96
/
EC.
At the end of its working life,
the product must not be disposed
of as urban waste. It must be
taken to a special local authority
differentiated waste collection centre
or to a dealer providing this service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment
and health, avoiding inappropriate
disposal enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked
with a crossed-out wheeled dustbin.

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THE PRODUCT.
WARNING! In order to avoid overheating, please DO NOT
COVER heater during use.
DO NOT
use the heater unless the feet are correctly attached.
Ensure the power supply to the socket into which the heater
is plugged is in accordance with the rating label on the heater
and that the socket is earthed.
Keep the power cord away from the hot body of the heater.
Do not use this heater in the immediate
surroundings of a bath, shower or swimming pool.
The heater is not intended for use in bathrooms, laundry
areas or similar indoor locations. place the heater
where it may fall into a bathtub or other water containers.
use outdoor, for indoor use only.
cover or obstruct any of the heat outlet grilles
or the air intake openings of the heater.
place the heater on deep pile carpets.
ensure that the heater is placed on a firm level
surface. Ensure that the heater is not positioned close
to curtains or furniture as this could create a fire hazard.
position the heater in front of, or immediately
below, a wall socket.
use the heater in areas where flammable liquids
are stored or where flammable fumes may be present.
unplug the heater when moving it from one
location to another.
use the heater if the power cord is damaged.
If the power cord is damaged it must be replaced by
a recognised service agent or other qualified person.

In order to avoid overheating, do not cover
the heater. Some parts of this product can become very hot
and cause burns. Particular attention has to be given where
children and vulnerable people are present.
Children of less than 3 years should be kept away from
the heater unless continuously supervised.
Children aged from 3 years and less than 8 years shall only
switch on/off the appliance provided that it has been placed
or installed in its intended operating position and they have
been given supervision or instruction concerning the use
of the appliance in a safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years
shall not plug in, regulate and clean the appliance or perform
user maintenance.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out this appliance must not
be supplied through an external switching device such
as a timer or connected to a circuit that is regularly
switched on and off by the utility.

It is normal when the
heaters are turned on for the first time
or when they are turned on after having
not been used for a long period of time,
the heaters may emit some smell and fumes.
This will disappear when the heater has
been on a short while.
Choose a suitable location for the heater
into account the safety instructions in this manual.
Insert the plug of the heater into a suitable socket.
Turn the thermostat knob fully in a clockwise direction
to the maximum setting.
Turn on the heating elements by means of the rocker
switches on the side panel. When the heating elements
are on the switches will illuminate. For maximum heat
output, both switches should be on.
When the desired room temperature has been reached,
the thermostat knob should be turned slowly anti-clockwise
until the thermostat is heard to click off and the lights on the
element switches are seen to go out. After this the heater will
keep the air temperature in the room at the set temperature
by switching on and off automatically.
This is operated by means of the switch
with the fan symbol along side it. The fan will only operate
with the thermostat in the “on” position and can be used
when the heating elements are “on” to blow warm air into
the room. In warm conditions the fan can be used with the
heating elements “off” to blow cool air into the room.

We, the importer:
Munro Importers Ltd
























MU IMD
I

8

Always un-plug the heater from the wall socket and allow
it to cool down before cleaning.
Clean the outside of the heater by wiping with a damp cloth
and buff with a dry cloth.
Do not use any detergents or abrasives and do not allow any
water to enter the heater.
When the heater is not used for long periods of time it should
be protected from dust and stored in a clean dry place.
This marking indicates that this product should not
be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment
or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection systems
or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling
For a complete range of fires, radiators
and heaters please call or visit Supa Brands
for further information:
www.supabrands.co.uk Helpline:
01473 237 997
Part of the extensive Supa Brand Range
PO Box 1042, Ipswich, IP1 9XY
9