SUPER LIVING Dynamo User manual

Dynamo Floor Lamp
Thank you for purchasing this Dynamo Floor Lamp. Please read the instructions and
warnings carefully before assembly of this product, to ensure safe and satisfactory
operation.
The lamp features a 345° movable shade.
Warnings!
•This product is Class II and must not be earthed.
•This lamp is for indoor use only.
•To prevent electrocution, switch off at the mains supply before installing or
maintaining this fitting. Ensure other persons cannot restore the electricity supply
without your knowledge.
•Always use the correct type (E27) and wattage bulb (1xES Max 60W or 15W
Energy Saving). Never exceed the wattage stated.
•When changing a bulb, always switch off at the mains and allow the old bulb to
cool down before handling. Dispose of used bulbs carefully.
•The bulb and surrounding parts can become extremely hot during use.
•The supply cord cannot be replaced. If the cord is damaged the floor lamp should
be destroyed in order to avoid a safety hazard.
•230V ~ 50/60Hz.
Assembly Instructions:
1. Carefully unpack the carton, making sure all parts are included (see the drawing)
before assembly.
2. Place lamp parts on a flat surface as per sketch.
3. Fit the bulb type / wattage as indicated on the luminaries (bulb not included).
The wattage indicated must not be exceeded.
4. Attach bottom pole (2) to lamp base (1) and tighten. Screw middle pole (3) to
bottom pole (2) until tight. Screw double arms and lamp unit (4) to middle pole
(3) until tight.
5. Insert the plug into the power supply, turn on the switch.
Care & Cleaning
We recommend cleaning with a soft dry cloth. Do not use abrasive materials, as
these will damage the finish.

In the box you will find a metal handle to tighten
the butterfly screws if necessary.
Simply mount the handle on the screws and
tighten clockwise.
Please retain this information leaflet for future reference.
Superlove ApS Nørregade 45 1165 Copenhagen K Denmark
www.superliving.dk