Super Vac 724BCB User manual

VENTILATOR USER GUIDE MODEL 724BCB

BRAKE COOLING FAN
1
724BCB User Guide Revised 1-2018
USER GUIDE
This manual covers the description, cautions, operation, and maintenance of the Super Vac
724BCB.
Please take the time to read this manual before operating the fan.
Save this guide for future reference.
CONTENTS
1. BREAKAGE OR DAMAGE DURING SHIPMENT ......................................................................................................................................................................
2
2. GENERAL DESCRIPTION AND SPECIFICATIONS. .............................................................................................................................................3
3. PRODUCT SAFETY PRECAUTIONS. ........................................................................................................................................................................3
4. BEFORE OPERATING VENTILATOR .......................................................................................................................................................................4
5. OPERATION. .................................................................................................................................................................................................................................
4
6. CHARGING THE BATTERY PACK.............................................................................................................................................................................................................. 5
7. MAINTENANCE AND REPAIR ........................................................................................................................................................................................................
5
8. WARRANTY .............................................................................................................................................................................................................................................................. 6
9. CONTACT INFORMATION. ..........................................................................................................................................................................................7
10. PARTS LIST ............................................................................................................................................................................................................................................................. 8
11. EXPLODED VIEW ............................................................................................................................................................................................................................................................... 9
12. LIFT ASSEMBLY ..................................................................................................................................................................................................................................................
10

BRAKE COOLING FAN
2
724BCB User Guide Revised 1-2018
1. Breakage or Damage During Shipment
The transportation company is fully responsible for all shipping damage and will resolve problems promptly if you handle it
correctly. Please read these instructions carefully.
Examine the contents of all shipping cases. If you find any damage, call your transportation agent at once and have them make a
description on the freight or express bill describing the damage and the number of pieces. Then write us and we will send you the
original bill of lading. Get a claim blank from the express or truck company. Fill the claim form out. Attach the claim blank to the
original bill
of lading together with a copy of our invoice. Attach a memo on which you show the value of the damaged goods. Mail or
hand these papers to your local transportation agent. They will process your claim with reasonable promptness.
Please note, we cannot and will not enter claims for damages. If we filed claim here, it would be sent to your local freight
agent for verification and investigation. This time can be saved by your filing the claim directly. Every consignee is on the
ground floor and in contact with the local agent who inspects the damaged goods, and thus, each claim can be given
individual attention.
Since our goods are packed to comply with the regulations of all railroad, truck, and express companies, we cannot allow deduction
from any invoice because of any damage, however, be sure to file your claim promptly. Our goods are sold F.O.B. factory. We take
receipt from the transportation company certifying that the goods were delivered to them in good order, and our responsibility
ceases.
It is seldom that any breakage or damage occurs in any of our shipments, and in no case will the customer be out any
expense if they follow the above instructions.
Be sure to keep all damaged goods subject to examination of the truck or express company inspector, who may call on you
some time later. These damaged goods, of course, will belong to them, and they will inform you what to do with them. If you
dispose of these damaged goods, your claim may not be paid.

BRAKE COOLING FAN
3
724BCB User Guide Revised 1-2018
2. General Description and Specifications
Super Vac ventilators are specifically designed to provide a convenient and portable source of air.
Model
#
RPM Voltage Motor HxWxD Weight
724BCB 2500 24 V DC,
115/230V AC
Totally Enclosed Air Over ( TEAO) 35” x 22” x
28.75”
108 lb
139 lb with
battery
This ventilator is designed for high powered air movement.
3. Product Safety Precautions
• Do not use the ventilator for purposes other than its intended use.
• Wear eye and ear protection when operating the ventilator.
• Never operate ventilator while fatigued.
• Do not disassemble or modify the ventilator in any way. Doing so may lead to mechanical failure or personal injury.
• Do not wear loose clothing that could become entangled in the operating ventilator.
• Never permit anyone to operate ventilator without proper instruction.
• Do not operate ventilator without proper inlet or outlet guards in place. If guards are missing or damaged, contact
factory for replacements.
• Do not place fingers or other foreign objects through inlet or outlet guards. Should a foreign object enter the ventilator,
immediately stop motor. Be certain all mechanical motion has stopped. Disconnect battery plug wire from IonPac2.0 before
removing foreign object.
• Do not use with any power voltage other than the indicated voltage.
• Never handle energized power cords with wet hands.
• Do not place or operate ventilator on unsteady tables, slanted surfaces or other unstable surfaces. Never use this
ventilator in any explosive environment.
• Never let extension cords or plug connection lay in water. Locate the ventilator so that it cannot fall into water inadvertently.

BRAKE COOLING FAN
4
724BCB User Guide Revised 1-2018
4. Before Operating Ventilator
• Always operate/charge this ventilator with a proper portable DC (supplied with unit) or 115/230V, 60 & 50 Hertz power source.
• Never use power cords with frayed, cut, or brittle insulation.
• A complete inspection of the ventilator should be made prior to operation.
• Inspect power cord plug for sound connections.
• Check all threaded fasteners for proper tightness
• Inspect inlet and outlet guards for damage or missing pieces. Replace damaged or missing guards before operating ventilator.
5. Operation
Check ventilator inlet and outlet guards for obstructions. Check
and remove from immediate surrounding area any objects that
could be drawn into the ventilator intake.
Place ventilator in desired location before connecting battery
pack. Use caution not to direct toxic fumes into confined spaces
with the ventilator. Please refer to the Super Vac Training Manual
for Smoke Ventilation for comprehensive instruction on effective
ventilation practices.
Move power switch located on battery pack to the desired speed
to begin ventilation. To stop ventilation, move power switch to
the off position.

BRAKE COOLING FAN
5
724BCB User Guide Revised 1-2018
6. Charging the Battery Pack
The battery pack contains a 24V lithium Ion battery. Total discharging of the batteries is not required as a maintenance
procedure. To restore battery charge –
• Insert extension cord from battery charger into charging plug on battery pack.
• Plug battery charger into appropriate AC power supply
The charger will progressively recharge the batteries from the discharged state. After 5 hours the batteries will be
restored to 100% of total capacity.
Battery can be charged with fan is still in use with AC power.
7. Maintenance and Repair
Maintenance should only be performed by experienced and trained personnel.
Be sure the ventilator is disconnected from the power source before performing any maintenance or repair. The motor is of
heavy-duty ball bearing construction. The unit is completely sealed and requires no lubrication for the life of the motor.
The ventilator blade should be specially checked for build-up of material or dirt which may cause an imbalance. Excessive
imbalance can lead to accelerated wear on motor bearings and vibration. Remove ventilator guards. Clean blade and inside
housing with mild detergent and water. Do not use abrasives, sharp instruments or caustic solvents that may scratch or damage
the aluminum alloy blade.
Intake and exhaust guards are not interchangeable. When replacing guards after cleaning, position them with
the rings to the outside with the row of spot welds holding the rings on the bottom.

BRAKE COOLING FAN
6
724BCB User Guide Revised 1-2018
8. Warranty
Super Vacuum Manufacturing Company warrants that the equipment is free from defects in materials and workmanship when
used and operated for a period of five years. The responsibility of Super Vacuum Manufacturing Company under this limited
warranty is limited to the repair and replacement of any parts which are found defective and which are returned to Super
Vacuum Manufacturing Company at 3842 Redman Dr, Fort Collins, CO 80524 with transportation charges prepaid (C.O.D.
shipments will not be accepted).
Prior to returning defective parts to SUPER VACUUM MANUFACTURING COMPANY, the original purchaser shall make a claim in
writing to SUPER VACUUM MANUFACTURING COMPANY at the above address indicating the model number and type of defect. No
parts or equipment will be received by SUPER VACUUM MANUFACTURING COMPANY for repair or replacement under this warranty
without specific written authority from it in advance.
Any parts damaged by improper installation, overloading, abuse or accident of any type or cause are not covered by this warranty.
All equipment manufactured by us is pre-run and tested before leaving our plant and is shipped in good working order and condition.
We therefore extend to the original purchasers the following Limited Warranty for the period of five years from the original date of
purchase:
1.
This warranty does not apply to defects caused by accident, misuse, neglect, or wear and tear, nor can we be held
responsible for incidental and consequential expense and loss, nor does this warranty apply to equipment where
alterations have been executed without our knowledge or consent. These conditions are readily discernible when the
equipment is returned to us for inspection.
2.
On all component parts not manufactured by SUPER VACUUM MANUFACTURING COMPANY, their warranty is to the extent
that the manufacturer of such component warrants them to SUPER VACUUM MANUFACTURING COMPANY, if at all. Look in
your local business phone directory for the nearest repair station for the brand of parts you have or write to us for the
address.
3.
If equipment received is found to have been damaged in transit, a claim should be made against the carrier within three
days, as we assume no responsibility for such damage.
4.
Any service other than our Authorized Service voids this warranty.
5.
This warranty is in lieu of and is intended to exclude all other warranties, express or implied, oral or written, including any
warranties of MERCHANTABILITY or FITNESS for a particular purpose.

BRAKE COOLING FAN
7
724BCB User Guide Revised 1-2018
9. Contact Information
For parts or service information, contact:
Super Vacuum Manufacturing Company, Inc.
3842 Redman Dr.
Fort Collins, CO 80524
Phone: [phone]
970-297-7100
Fax: [phone]
Email : [e-mail]
Internet: www.supervac.com

BRAKE COOLING FAN
8 724BCB User Guide Revised 1-2018
10. Parts List
PARTS LIST
ITEM
QTY
PART NUMBER
DESCRIPTION
1 1
018-15049 FRAME, 724BCB
5 1
018-15050 LIFT MECHANISM
6 2 008-13373 WHEEL PNEUMATIC DW414 3" HUB CENTER
7 1
021-14922 MOTOR FOR 724BCB 1HP TEFC BI-DIR
8
1
019-10461 724 HANDLE PAINTED
9
1 INTAKE PLENUM
10
1
003-14150 BLADE, INLET CONE, PB831 #C-TO-ICP280
11 1
012-14143 GUARD, 724BCB FRONT-PAINTED
13
1
003-14149 BLADE, PROPELLER, #C-T2-TAL280-1R PB831
14 1
018-14028 SHROUD, 724BCB, W/GUARD, PAINTED
15
6 032-10734 SCREW,HH,1/4-20x3/4,SS
16 6 032-10752 WASHER,FLAT,SAE, 1/4", SS
17 4
032-10778 SCREW,HH,5/16-24x1-3/4,SS
18 8 032-10786 WASHER,FLAT,USS, 5/16", SS
19 12 034-11057 NUT,NYLOCK, 5/16-18 UNC,SS
20 2 032-13864 SCREW,HH,1/2-20x3-1/2,SS
21 6 032-18804 WASHER,FLAT,USS, 1/2", SS
22 2 032-18802 NUT,NYLOCK, 1/2-13 UNC,SS
23 2 032-15464 SCREW,HH,3/8-16x3,SS
24 2 032-11129 WASHER,FLAT,SAE, 3/8", SS
25 2 034-11073 NUT,NYLOCK, 3/8-16 UNC,SS
26
4
024-13473 FEET RUBBER CONE SHAPE VBM-4002
27
4
032-10769 SCREW,HH,5/16-18x1-1/4,SS
28 8 032-10786 WASHER,FLAT,SAE, 5/16", SS
29
4
008-10190 PLUG, FINISHING, 1 1/4 SQ, RIBBED, BLACK
30 2 008-10189 PLUG, FINISHING SQ RIBBED, BLACK 1"
31 2 008-10192 SPRING, A-180-S VALCO
32
1
IonPAC2.0 BATTERY PACK - IONPAC2.0
33
1
041-11489 EDGE, TRIM SEAL, 3/4 BULB
34
1
008-14145 BUSHING,BLADE MAUREY, HQ X 5/8"
35
1
008-10193 KEYSTOCK,SHAFT,BLADE,718, V-18
36 2 032-10745 SCREW,HH,1/4-20x1,SS
37 2 032-10754 WASHER,LOCK,SPRING,REGULAR, 1/4", SS
39
4
096-01140 SCREW,HH,M6x1.0x25,SS
40
4
034-11028 WASHER,LOCK,SPRING,REGULAR, M6, SS
41
3 032-10723 SCREW,PHP,1/4-20 UNCx0.5
42
1
025-10544 DECAL - CAUTION GUARDS REMOVED
43
1
025-10578 DECAL - 724BCB YELLOW SAFETY
44 1
025-13426 DECAL SUPER VAC VERTICAL LETTER
45 1
025-10577 DECAL - 724BCB SERIAL NUMBER

BRAKE COOLING FAN
9 724BCB User Guide Revised 1-2018
11. Exploded View
8
32
42
45 43
19
18
19
7 28
18
23
5 25
29
23
24
30
31
28 29
17
27
44 39
16
37 1
11
15
36 40
19
29
34 13 9
10
41
33
14 21
26
20
6 22 21
20

BRAKE COOLING FAN
10
724BCB User Guide Revised 1-2018
12. Lift Assembly
PARTS LIST
ITEM QTY PART NUMBER DESCRIPTION
14
1 1 018-16209 BASE,TILT, BRAKE COOLER
2
1
018-16203 SHAFT, BOTTOM FRONT, BRAKE COOLER
3 2 018-16205 BRACKET,TILT, BRAKE COOLER
4 1
018-16200 SHAFT,BOTTOM REAR, BRAKE COOLER
9
5
2 018-16204 BRACKET,TILT, BRAKE COOLER
6 2 018-16207 MOUNT,PIVOT, BRAKE COOLER
7 1
018-16202 SHAFT,TOP FRONT, BRAKE COOLER
8
1
018-16201 SHAFT,TOP REAR
9 1 018-16208 TOP PLATE, TILT, BRAKE COOLER
17
10 8 065-13846 BUSHING, 5X 75X .03125 THERM. POLYMER
11 2 018-16206 HANDLE,MOUNT, BRAKE COOLER
22
12 12 069-15336 E-Ring, 5133-50, .044T, SS
12
11 22
13
4
STD HARDWARE-SHCS-47 SCREW,SHCS,10-24x1,SS
14 6 STD HARDWARE-FHMS-85
SCREW,FHPMS,10-24 UNC x 3/4 in,SS
15
2 GAS SPRING GAS SPRING
7
16
4
MOUNT MOUNT, GAS SPRING
10
17
2 008-10211 CAP,FAN,HANDLE,718
18 6 034-11057
NUT,NYLOCK, 5/16-18 UNC,SS
5
19 2 STD HARDWARE LW39 WASHER,LOCK,SPRING,REGULAR, 5/16", SS
20
4
STD HARDWARE-HHCS-235 SCREW,HH,5/16-24x1-1/2,SS
21 8 STD HARDWARE W24 WASHER,FLAT,USS, 5/16", SS
22 4 STD HARDWARE-HHCS-35
SCREW,HH,5/16-18x1-1/2,SS
23 4 AS568A-015 ORING,ID 0.551,SIZE 0.551,AS568A-015
2
21 10
13
16
8
4
6
3
19
23
3
18
11
10
21
1
20
15
12