superbrightleds LPIR-5A User manual

superbrightleds.com
LPIR-5A PIR Activated Motion Sensor Switch
Overview:
The LPIR-5A PIR motion sensing switch offers high sensitivity and reliability.
This switch is especially suited as an occupancy sensor for roo lighting control
Features:
- Auto-sensing detects people entering the room.
- Delay time is reset when motion is detected.
- Works with varying levels of ambient light (User Adjustable)
- User settable delay lets you choose how long the switch remains “on”
(approx 30 seconds – 9 minutes).
Instructions for use:
1. Connect switch as shown in the wiring diagram and allow approx 2
minutes for the sensor to stabilize.
2. Now set adjustments
Sensitivity Adjustment (CDS1): Controls the threshold for ambient light clockwise for
less sensitivity.
Output Delay Adjustment (TIMR): Turn the adjustment knob clockwise for longer delays.
superbrightleds.com
Technical para eters:
1. Operating voltage: DC12V ± 10%
2. Sensing distance: Wall Mounted - range 21 ft. Ceiling mounted at a height of 7-12 ft – range 9-24 ft.
4. Power consumption: 0.25W≦
5. Load power: 60W≦
6. Detection angle:130 --- 160 degrees
7. Ambient Light Sensitivity Range :1-110LUX (adjustable)
8. Output Delay: 30 seconds - 9 minute (adjustable)
9. Ambient temperature: -10 ~ +50 ℃
10. Product Size: φ95 × 35mm
11. Contact working life: 50 million
Notes:
Install away from windows and air registers. Air movement and direct sunlight can cause false triggers.
Avoid installing near radio sources such as cordless phones Wifi Routers Microwaves etc.
CDS2 is for factory calibration
Website: superbrightleds.com
Tel: [phone]
Fa : [phone]
Email: [email protected]
Address: Super Bright LEDs, Inc.,
4400 Earth City E pressway
Earth City, MO 63045