SUPERDIGITAL TECHNOLOGY W800 User manual

1
Please read this User’s Manual carefully to understand the functions and operation of the
mobile phone.
This mobile phone incorporates the latest world advanced functions, enabling simple and
convenient operation and satisfying your special requirements.
The mobile phone supports T-FLASH (memory) card and dual SIM standby. It integrates the
GPRS function, enabling WAP surfing in higher speed; in addition, the following functions are
also available: SMS, MMS, MP3, MP4, alarm clock and memo, enabling you arranging your work,
study and life freely; with smart games and long standby duration, as well as world clock and
calculator, your communication will be easier and smoother; powerful file manager allows you
managing the files conveniently. In addition, the 64-chord ringtone allows you selecting music to
set as ringtone; the personalized appearance also can satisfy your selection.
Mobile phone
W800
User manual

2
1． Index.. 4
2. Safety
precautions.................................. 5
Driving safety _______________________________________________ 5
Power off in aircraft ________________________________________ 5
Power off in the operation area of explosion _________________ 5
Power off near dangerous articles ____________________________ 5
In hospitals _________________________________________________ 5
Interference _________________________________________________ 6
Professional service _________________________________________ 6
Accessories and battery ______________________________________ 6
Rational application _________________________________________ 6
Emergency call _______________________________________________ 6
3. About the phone 6
3.1 Display settings ___________________________________________________ 6
3.2 Status icons _______________________________________________________ 7
4. Getting
started...................................... 7
4.1 First call _________________________________________________________ 7
4.2 Installing the SIM card ____________________________________________ 7
4.3 Installing memory card _____________________________________________ 8
4.4 Battery and charging _______________________________________________ 8
Installing the battery _________________________________________________ 8

3
Charging the battery ___________________________________________________ 8
Using battery __________________________________________________________ 8
4.5 Switching on/off ___________________________________________________ 9
4.6 Password ___________________________________________________________ 9
SIM1 PIN ______________________________________________________________ 10
SIM2 PIN ______________________________________________________________ 10
4.7 Using handsfree kit _______________________________________________ 10
Keypad lock ___________________________________________________________ 10
Number keys ___________________________________________________________ 11
Language and input method _____________________________________________ 11
Service _______________________________________________________________ 11
Group _________________________________________________________________ 11
Noun __________________________________________________________________ 11
Shortcut functions ____________________________________________________ 12
5. Common functions
............................................ 12
5.1 Making a call _____________________________________________________ 12
5.2 Adjusting receiver volume _________________________________________ 12
5.3 Answering calls ___________________________________________________ 12
5.4 Call options ______________________________________________________ 13
5.5 Missed calls ______________________________________________________ 13
5.6 Connecting to voicemail ___________________________________________ 14
6. Menu guide
............................................ 14
6.1 Music player ______________________________________________________ 14
6.2 Phonebook _________________________________________________________ 14
6.3 Call center _______________________________________________________ 15
[Call log] ____________________________________________________________ 15
[General call settings] _______________________________________________ 16
6.4 Services __________________________________________________________ 17
6.5 Messaging _________________________________________________________ 18

4
6.6 Multimedia ________________________________________________________ 21
[Cameral selection] ___________________________________________________ 21
[Camera] ______________________________________________________________ 21
[Video recorder] ______________________________________________________ 22
[Video Player] ________________________________________________________ 22
[FM radio] ____________________________________________________________ 22
[Sound recorder] ______________________________________________________ 22
[Mobile TV] ___________________________________________________________ 23
6.7 Organizer _________________________________________________________ 23
6.8 File manager ______________________________________________________ 23
6.9 Calendar __________________________________________________________ 24
6.10 Game _____________________________________________________________ 24
6.11 Profiles _________________________________________________________ 25
6.12 Settings _________________________________________________________ 25
7. Appendix
............................................ 26
Appendix A: Please take care of your mobile phone _____________________ 26
Appendix B: Troubleshooting ___________________________________________ 27
Appendix C: Abbreviation and explanation ______________________________ 27
Appendix D: Optional parts ____________________________________________ 27
1．Index
………………………………………………………………………… 1. Index
……………………………………………………………… 2. Safety precautions

5
……………………………………………………………… 3. About the phone
……………………………………………………………… 4. Getting started
……………………………………………………………… 5. Common functions
……………………………………………………………… 6. Menu guide
…………………………………………………………… 7. Appendix
2. Safety precautions
Please read and follow these concise rules carefully to prevent danger or breaking laws.
Driving safety
Do not use mobile phone when driving. Use the hands-free accessories if you have to use the phone. Put the
mobile phone in the holder, instead of the passenger seat or any place that the phone will fall off.
Power off in aircraft
The interference of mobile phone will affect the flight safety and it is illegal to use mobile phone in aircraft. Please
switch off you mobile phone before boarding.
Power off in the operation area of explosion
Please follow the regulations or rules and switch off your mobile phone in or near operation area of explosion.
Power off near dangerous articles
Please turn off your mobile phone at gas station or places near fuels and chemicals.
In hospitals
Please follow the regulations or rules of hospitals when you use mobile phone there. Switch the device off near
medical equipment. Any wireless device, including mobile phone, will interfere with the medical devices which
are not fully protected. Other electronic devices also may be affected. If you have any question, please consult
your doctor or the manufacturer.

6
Interference
Any mobile phone might be interfered with and its performance will be affected thereby.
Professional service
Only qualified maintenance personnel can install or maintain this mobile phone. It may cause serious danger and
also violates warranty clauses if you install or maintain the mobile phone by yourself.
Accessories and battery
Use manufacturer approved accessories and batteries only.
Rational application
Use the mobile phone in normal way. Do not put your mobile phone in the environment with too high temperature
(higher than 60℃), for example, put it under the window which is irradiated by sunshine directly. Please use wet
or antistatic cloth to clean your phone. Do not use the cloth with static to wipe the phone.
Emergency call
Make sure that the mobile phone is switched on and in service area, enter the emergency number (e.g. 110) and
press the Call key to call the number. Report your position and explain your condition briefly. Do not end the
call without permission.
Note: Like other mobile phones, the characteristics of this phone may be not supported because of the network coverage or
wireless signals transmission. Certain networks even don’t support emergency call. Therefore, do not depend on mobile phone
only for very important communication (e.g. medical emergency). Please consult your local network operator.
3. About the phone
The mobile phone has 51 keys, one display, one earphone, charger/data cable port and one external memory card
(T-FLASH card) interface.
3.1 Display settings
The display area consists of three parts:

7
1> The top line displays icons, indicating the signal intensity and battery status.
2> The center area displays the text and figures, including numbers, words and dynamic icons.
3.2 Status icons
| | | | | | | | | | |____ New WAP message
| | | | | | | | | |_________ Roaming
| | | | | | | | |_______________ New MMS
| | | | | | | |____________________ MMS busy
| | | | | | |_________________________ New SMS
| | | | | |_____________________________ Missed calls
| | | | |_________________________________ Battery status
| | | |______________________________________ Alarm clock activated
| | |__________________________________________ Keypad lock
| |______________________________________________ Divert all calls
|_____________________________________________________ Signal intensity
Ringtone state: ---- ringing -----vibrator ----- ringing after vibrator -----ringing and vibrator
4. Gettingstarted
4.1 First call
1> Insert the SIM card (switch off the phone first). For detailed installation guide, please refer to “4.2 Installing the SIM card”.
2> Charge the battery. Refer to “4.4 Battery and charging”.
3> Press and hold the End key to switch on the mobile phone.
4> If the display prompts, enter the four-digit password and press OK.
5> If the display prompts, enter the PIN code (provided together with the SIM card) and press OK.
6> Enter area code and telephone number and then press the Call key. Or click the icon with the stylus to bring out soft keypad,
enter the telephone number and press the Call key.
Note: Before using the mobile phone, please insert a valid SIM card and charge the battery.
4.2 Installing the SIM card
When you register mobile phone, you can apply for two different telephone numbers and two SIM cards (Subscriber
Identity Module).
With the two cards, you can use the functions of the mobile phone. The SIM card saves the parameters required by the
communication, and personal information, including PIN code (personal identity number), Contacts, short messages and other
system services.
Warning: Do not bend or scratch the SIM card, or contact static, dust or water; if the SIM card is lost, please contact your
network operator.
Please switch off the mobile phone before installing the SIM card. The SIM card is inserted into the rear side of the mobile
phone.
Note: The T-flash card is tiny. Please keep it away from children to avoid swallowed.
If the SIM card is invalid or damaged, the phone displays “Insert SIM card”. Switch off the phone and take out the SIM card, and
then re-insert it into the slot properly.
If the SIM card is damaged, please contact your network operator.
If the SIM card is locked, please contact your network operator.

8
4.3 Installing memory card
Since the mobile phone doesn’t have enough space, you may need to install a memory card (T-FLASH card).
To install the T-FLASH card: open the rear cover, take out the battery, insert the T-FLASH card into the slot, install the
battery and then turn on the mobile phone.
To remove the T-FLASH card: open the buckle and take out the T-FLASH card, and then lock the buckle.
Note: T-Flash card is tiny. Please keep it away from children.
Note: Please select qualified T-FLASH cards, such as SANDISK, V-DATA, and Transcend. Please match with the mobile phone
when you purchase the card.
4.4 Battery and charging
Installing the battery
Only use qualified battery and accessories. When the battery isn’t used, put it in the protective case.
Note: Please operate according to the figure to avoid damaging the battery contact.
Charging the battery
The new battery will reach its optimized performance after complete charging and discharging for several times.
Please charge in time when the battery voltage is low. Over discharging will damage the battery.
Disconnect the charger from the AC power supply and the mobile phone after charging.
While charging, the battery status icon flashes from left to right, and stops flashing after charging.
It is normal that the battery becomes warm in the charging process.
Battery status
Your mobile phone can monitor and display the battery status.
1> You can check the battery status from the icon in the upper right corner of the screen.
2> If the electricity is insufficient, the “Low Battery” prompt shows up. The mobile phone sends warning tone if the “Alert
Tone – Warning Tone” in Profiles is activated.
3> During charging, the icon of battery status blinks until the charging completes.
Note: The actual standby time and call time depend on the operation, local network, and settings of the SIM card and mobile
phone.
Using battery
The performance of the battery is affected by various factors, including wireless network settings, signal intensity,
environment temperature, the function or settings that you select, accessories and the mode of voice, data or other applications
that you select.
To keep the battery in optimum performance, please follow the rules below:
The charging of new battery or batteries haven’t been used for long time may be longer;
Keep the battery in room temperature when it is being charged;
It is normal that the charging time becomes longer after long time using. If the call time becomes shorter and charging time
becomes longer after normal charging, you need to change a qualified battery. Unqualified battery may damage your phone
and cause danger.
If the battery is left unused for too long time or the battery voltage is too low, it takes certain period of time to display the
charging interface normally when the charger is connected.
Note: To protect your safety and the environment, do not dispose the battery randomly.
Warning: The short circuit of battery may cause explosion, fire or body hurt.

9
Precautions of using battery
1> Switch off the phone before removing the battery.
2> Use the battery carefully. It will cause short circuit to connect the anode (+) and cathode (-) of the battery with metal
objects (coin, clip, etc.), and damage the battery and metal objects. When the battery is removed and put in the bag, do not
contact the anode and cathode of the battery with metal objects (e.g. keys).
3> Do not put the battery in fire, or use in any place with high temperature.
4> Do not disassemble or refit the battery.
5> Do not put the battery in the place with strong mechanical impact or break through with hard object.
6> Store the battery in cool and dry place, and avoid high temperature (> 60°C) and direct sunlight.
7> Stop using if there is any particular smell or overheating.
8> Stop using the battery if there is any crack, distortion or electrolyte leakage.
9> If the electrolyte stains the skin or clothes, please wash with soap and clean water immediately; the electrolyte enters the
eyes, wash with clean water immediately and go to see the doctor.
10> Do not use the lithium battery in low temperature, in which the battery can’t get the maximum standby/call time.
11> Do not wash the battery with water or organic solvent, or put it in water.
12> Fully charge the battery if it won't be used for a long time.
13> You are recommended to return wasted batteries to the manufacturer of mobile phone or put them in the specified public
recovery area of wasted batteries. Do not put them together with other garbage or dispose casually.
Using 2-in-1 charger (charger + data cable)
The 2-in-1 charger may charge the battery through the mobile phone.
1> Connect the data cable and charger
2> Connect the data cable of the 2-in-1 charger to the I/O slot of the mobile phone.
3> Connect the charger plug of the 2-in-1 charger to the appropriate power outlet.
4> During charging, the icon of battery status blinks until the charging completes.
5> After charging, the battery icon stops flashing, and you can pull out the 2-in-1 charger.
Note:
If the battery voltage is too low and can’t turn on the mobile phone, the charging icon may appear on the screen after several
minutes.
The mobile phone may be turned on or off during charging.
Warning: Make sure that the local voltage and power match the rated voltage and power of the 2-in-1 charger.
4.5 Switching on/off
1> Press and hold the End key to switch on the mobile phone. The screen shows the power on video.
2> If the phone lock is activated, please input the password and press “OK”. The default password is 1122.
3> If the PIN code is activated, please input the code and press “OK”. The PIN code is provided by the network operator.
4> Access standby interface.
5> Press and hold the End key to switch off the mobile phone.
4.6 Password
The mobile phone and SIM card have several passwords, which will prevent your mobile phone and SIM card from illegal
operation. Press “OK” after inputting the valid password (expressed in *). If there is misinput, please press the “Clear” key to

10
delete the error and then input the correct numbers. You can change the PIN code, PIN2 code and phone password in “Settings –
Security – Change password”.
Phone password
The phone password is the phone lock, which can prevent your mobile phone from illegal operation. The phone password is
provided together with the mobile phone by the manufacturer. The default password is 1122. If the mobile phone is locked, you
need to enter the password to turn on the mobile phone.
SIM1 PIN
PIN code: The PIN (Personal Identity Number) code is provided with the SIM card and will prevent your SIM card from
illegal operation. If the PIN lock is activated, the screen displays “Enter PIN” when you turn on the mobile phone. While entering
PIN code, the screen shows * instead. You can get the PIN code when you get the SIM card from the network operator.
PIN2: the personal identity number required by certain functions such as call expense.
PUK and PUK2 (8-digit)
You also need to input PUK (personal unblocking key) code to change locked PIN code. To change the locked PIN2, use
PUK2. If the codes are not provided with the SIM card, please contact local service provider.
Warning: If you enter invalid PIN code for three times consecutively, the SIM card will be locked. In this case, please
contact the local network operator. The SIM card may be damaged permanently if you try to decode by yourself.
SIM2 PIN
SIM2 PIN code: The PIN (Personal Identity Number) code is provided with the SIM2 card and will prevent your SIM2 card
from illegal operation. If the PIN lock is activated, the screen displays “Enter SIM2 PIN” when you turn on the mobile phone.
While entering SIM2 PIN code, the screen shows * instead. You can get the PIN code when you get the SIM card from the
network operator.
SIM2 PIN2: the personal identity number required by certain functions such as call expense.
SIM2 PUK and PUK2 (8-digit)
You also need to input SIM2 PUK (personal unblocking key) code to change locked SIM2 PIN code. To change the locked
SIM2 PIN2, use SIM2 PUK2. If the codes are not provided with the SIM card, please contact local service provider.
Warning: If you enter invalid PIN code for three times consecutively, the SIM card will be locked. In this case, please
contact the local network operator. The SIM card may be damaged permanently if you try to decode by yourself.
Disabling password
Disabling password is necessary to enable call barring. You can get this password from your network operator when you
subscribe for this function.
4.7 Using handsfree kit
With the handsfree kit, you can make or answer calls without holding the mobile phone. When you inert the handsfree kit into the
earphone port, the handsfree kit can be used as the handset and the microphone of the mobile phone.
Keypad lock
When the keypad is locked, the mobile phone will be locked automatically if there is no operation in certain period of time.
To unlock:
1、Press the Left soft key and * key
Note: When the keypad is locked, it will be invalid. If there is new call, you can answer as usual, and the mobile phone
will resume the locked state after the call.

11
Number keys
In the dial interface, press and hold the # key to activate/deactivate the silent profile.
In dialing interface, press and hold * key to input “+”, “P” or “W”; “P” and “W” are used to call extension and “+” is used to
call international numbers.
Tip: The difference between W and P: if P is pressed, it pauses for three seconds and then sends DTMF; if W is pressed, a
window pops up and asks if “Send DTMF?”
Language and input method
The mobile phone provides English, French, Spanish and Portuguese input methods. Please refer to the chapter of
editing English, French, Spanish and Portuguese for specific operation. You can understand the operation and switch of input
methods.
Service
STK service is the SIM card toolbox. This mobile phone supports service function and the menus depend on SIM card and
the network. If the network provides services and the SIM card supports, the service menu will be added to the mobile phone
automatically.
Group
The groups are Friends, Family, VIP, Colleague and Others. You can customize the ringtone and caller picture for each
group.
Noun
Making a DDD
To make a call with SIM1, the “SIM1” characters appear in front of the number; to make a call with SIM2, the “SIM2”
characters appear in front of the number. Once the other party answers, the screen displays the call status.
Press the End key to end the call.
To make a DDD: Area code + Telephone number + Dial key
Making an IDD
If you need to make an international call, press and hold the * key until the prefix symbol “+” of international long distance
call appears on the screen , and you can make a call in any country when you don’t know the local prefix number of
international call (for example, +86 in China).
Enter the prefix number, and then enter the country code and full phone number. The country codes are according to the
international tradition, and Germany is 49, UK 44, Sweden 46, etc.
To make an IDD: “+” Country code + Complete telephone number + Call key
Calling extension
Some extensions of fixed telephone can’t be dialed through directly and you need to dial through the exchange before dialing
the extension. If you insert the pause symbol P between the exchange number and the extension number when you input the
phone number, the mobile phone will complete the dialing and dial extension automatically. To enter “P”: press and hold the
stylus, or press * for three times (the symbol “P” appears on the screen).
To call extension of fixed telephone (excluding +):
Telephone number + P + Extension number + Call key
Emergency call
You can always make emergency call when you are in the coverage area of the network (you can know by checking the
indicating stripe of network signal intensity on the upper left corner of the screen). If your network operator doesn’t provide
roaming service in your area, the characters of “EMERGENCY CALLS ONLY” will appear on the screen and you could only
make emergency call. If you are located in a service area of the network, emergency calls can also be made without a SIM card.
* Note: In certain areas, 112 (emergency call) is provided by the network operator; if it is abnormal, please contact the network
operator.
IMEI
International Mobile Equipment Identity. Turn off the mobile phone and take out the battery, and you can find the label
printed with this bar code in the rear side. This number is also saved in the mobile phone. When the phone is turned on, enter
“*#06#” to display the number.
IP call
Set the valid IP access number in “Settings/Call settings” first. Enter Contacts and select “IP call”.
Note: Please consult local network operator that whether IP call should be enabled to call local numbers.

12
Shortcut functions
In the standby interface, if you want to activate the simulation keypad to make calls, click the screen dial to enter desired
number and then call the number or perform other operations. In addition, the mobile phone has five shortcuts, through which
you can access multimedia, messaging, profiles, service and Bluetooth directly.
5. Commonfunctions
5.1 Making a call
In screen dial interface, enter the telephone number (click Clear key with the stylus to delete mistakes), and press SIM1 Call
key to call the number with SIM1, or press SIM2 Call key to call the number with SIM2. To end the call or cancel calling,
press the [Cancel] key or [Power] key; when the call the connected, the call timer appears on the screen.
To make calls with Contacts: Enter the Contacts and search for name/telephone number, press the SIM1 Call key to call the
number with SIM1, or press the SIM2 Call key to call the number with SIM2.
Redialing recent numbers: In standby state, press the SIM1 (SIM2) Call key to view the list of 20 telephone numbers or
names called recently. Scroll to desired number or name, and then press the SIM1 (SIM2) Call key.
Correcting misinput
Press the Right Soft key to delete the character before the cursor. To clear all characters, press and hold the Right soft key.
Calling numbers in the Contacts
Method 1:
1> In the standby interface, press the Right soft key to access the Contacts, and search for desired telephone number in this
method: press the Up/Down key to view, press the number key of the first letter (or first pinyin for Chinese character) of
desired entry, and then press the Up/Down key to find desired telephone number.
2> Press the Call key to call the number.
Method 2:
1> In the standby interface, press OK to enter the main menu and then enter the Contacts.
2> Select “Search by name”, find desired number and press the Call key to call the number.
5.2 Adjusting receiver volume
During the call, you can press the side key to adjust the receiver volume.
5.3 Answering calls
When there is incoming call, the mobile phone prompts in ringing, vibrator, vibrator and ringing, or ringing after vibrator
according to the phone settings.
To answer the call, press the Call key.
To reject the call, press the [Power] key (End key) or click the [Reject] key in the lower right corner with the stylus.
If you have subscribed for caller number identification service, the caller number will appear on the screen. If the number is
saved in the Contacts, the contact name will appear on the screen.
If SIM1 is called, “SIM1” appears in front of the caller number or name;
If SIM2 is called, “SIM2” appears in front of the caller number or name;

13
5.4 Call options
Various functions are provided in the calling process.
Call waiting
If the network supports and you also enabled the call waiting, you can hear the call waiting tone if there is new call when you are
calling. Answering calls during a call:
1> Press the Call key or Left soft key to answer the call, and the first call will be held automatically. Refer to “Hold/Switch”.
2> Press the End key to end current call; press the Right soft key to end the new call.
3> Press the Left soft key to end current call and answer the held call.
Hold/Switch
If one call is held and the other call is active:
1> Press the Left soft key to select switch, the active call will be held and the held call will be active, so that you can make call
with the other party.
2> Press the Left soft key to select End, the active call or held call will be ended; press the End key to end the active call.
3> Press the Left soft key to select End all, and the active call and held call will be ended.
Call holding
If the network supports, you can make another call while calling:
Method 1:
1> Enter the number directly or press the Left soft key to select desired number in the Contacts, or press the Left soft key to
enter new telephone number, and then press the Call key to call the number.
2> The first call will be held automatically.
Method 2:
1> Press the Left soft key to activate silent profile and held current call.
2> Then, make another call.
After connected, one call is active and the other is held. You can switch the two calls. Refer to “Hold/Switch”.
Silent
With this function, you can activate or deactivate the microphone and other connected microphones. The “Silent” function can
prevent you from being heard.
During the call, press the Left soft key to access “Options > Silent/Resume” to activate/deactivate the silent profile.
5.5 Missed calls
If there is missed call, the icon appears on the screen and you can click the icon to view the missed call.

14
5.6 Connecting to voicemail
The mobile phone allows you diverting the incoming call to the voicemail, and then you will receive a message about
voicemail. (The number of voicemail center must be set in advance)
6. Menuguide
6.1 Music player
For WIN2000 or later operating systems, it is not necessary to install the drivers. Connect the mobile phone to PC with USB
cable and the Found New Hardware prompt appears. Download the selected MP3 files to the “My Music” folder. Do not save
them in Audio, Images or Photos. (Only support playing music in MP3 and MIDI format)
Description of music player options
Option Description
Play Play the selected music
Details View the file name, sound channel, audio quality, file size, track time, name, singer, album
and category
Add to ringtone
library Add the selected music to the ringtone library
Update playing list Update the playing list (e.g. update the playing list after deleting music from the file
manager)
Setting Auto generate list, repeat, random, background playing, Bluetooth stereo output, Bluetooth
stereo earphone, equalizer and playing path
Prompt: The mobile phone supports MP3 lyrics. Save the MP3 file and .LRC file with the same name in “My Music” folder
and the lyrics will be displayed when playing MP3.
Note: If the speed of the lyrics is different from the playing speed, the lyrics and MP3 won’t be synchronized. It is not the
problem of the mobile phone.
6.2 Phonebook
This mobile phone uses name card contacts and each contact saved in the mobile phone contains the following information:
three telephone numbers (mobile, home and business), company name, fax number, birthday, thumbnail, ringtone, caller group
(five groups are available: family, friend, VIP, colleague and others); each contact saved in the SIM1 and SIM2 only contains
name and telephone number.
The mobile phone supports 250 groups of numbers.
You can perform the following operations:
View: View the info of the contact.
Send text message: Send text message.
Send multimedia message: Send multimedia message.
IP call: Make IP calls.
Edit: Edit the options of the contact with this function.
Delete: Delete this entry.
Move: Move the contact to another memory device.
Copy: Copy the contact to current memory device.
Send contact: Send the contact in short message or file.

15
Print: Print the pictures saved in the mobile phone through a printer. (Please consult the printer manual or the manufacturer for
whether the printer supports this function). The operation is as follows:
The printer should support PictBridge function.
The printer is in standby state and the mobile phone is connected to the printer through USB cable.
When the mobile phone is connected to the printer successfully, select < PictBridge>, press OK and then you can operate the
printer with the mobile phone.
Select a picture from the file manager and press Options – Print – To PictBridge to start printing with the printer.
In addition to the operations above, you can also enter the Contacts in the main menu to perform the following
operations:
Quick search
In the input area where the cursor locates, enter the first pinyin letter or English letter to locate the first qualified entry in the
contacts list. For example, to search for “张”, enter letter “Z”.
Search name
Enter the desired name, and search the matched entry in the Contacts.
Adding numbers
To SIM1: include Name and Telephone number.
To Phone: include Name, Telephone number, Home number, Company name, E-mail, Business number, Fax number,
Birthday, Thumbnail, Ringtone and Caller group.
To SIM2: include Name and Telephone number.
Note: If one entry contains picture, ringing tone and caller group at the same time, this caller group will be invalid.
Copy all: Copy from SIM1 to phone, from phone to SIM1, from SIM2 to phone, from phone to SIM2, from SIM1 to SIM2,
or from SIM2 to SIM1.
Delete: Delete all the entries saved in SIM1, SIM2 and mobile phone, or delete contact entry. (Note: The password (default:
1122) is required to delete all the entries. To modify the password, change the phone password)
Caller group: Customize the caller ringtone, picture and members of the five groups separately.
Other numbers
Set own number, service number and emergency number (the service number and emergency number require SIM card
support; please consult the network operator for details).
Settings
Memory status: Check the status of current contacts, including SIM1, SIM2 and mobile phone. The displaying format is
“Used space/Capacity”.
Storage position: Select the path to save the number.
Contact settings: Select entries in Contacts and the entries displayed when adding contacts.
4. My contact: Edit or send my contact.
Contact version: Version 2.1 and 3.0 are available.
Caller picture
Set the picture displayed when there is new incoming call.
Caller ringtone
Set the ringtone of new incoming call.
6.3 Call center
[Call log]
This mobile phone can register the missed calls, answered calls and dialed numbers of SIM1 and SIM2, as well as the time
and expense of all calls. When the mobile phone is turned on and in network service area, and supported by the network, it can
register the missed calls and answered calls. In the lists of missed calls, answered calls and dialed numbers, you can check the

16
date and time of the calls, edit or delete the telephone numbers in the list, save the numbers in Contacts of SIM1 or SIM2.
Missed calls: View the list of 20 missed calls (10 for SIM1 and 10 for SIM2).
Prompt: When the mobile phone prompts missed call, you can press “Read” to access the list of missed calls. Select the desired
number and press the Call key to call this number.
Dialed numbers: view last 20 dialed numbers (20 SIM1 dialed numbers and 20 SIM2 dialed numbers).
Answered calls: View the list of 20 answered calls (20 for SIM1 and 10 for SIM2).
Clear call log: Clear SIM1 call log and SIM2 call log. You can select to clear SIM1 call log (including SIM1 missed calls, SIM1
answered calls, SIM1 dialed numbers), or only delete SIM1 missed calls, SIM1 answered calls or SIM1 dialed numbers.
You can select to clear SIM2 call log (including SIM2 missed calls, SIM2 answered calls, SIM2 dialed numbers), or only delete
SIM2 missed calls, SIM2 answered calls or SIM2 dialed numbers.
SIM1 call time:
Last call: Check the time of last call;
Dialed total: Check the total time of all dialed numbers;
Answered total: Check the total time of all answered calls;
Reset: Reset the call time of SIM1 in this option.
SIM2 call time:
Last call: Check the time of last call;
Dialed total: Check the total time of all dialed numbers;
Answered total: Check the total time of all answered calls;
Reset: Reset the call time of SIM2 in this option.
Note: It may be different from the actual call and service time in your network operator’s list. It depends on the network, billing
and tax.
SIM1 call expense: Requires network support.
Last call: Check the charge of last SIM1 call;
All calls: Check the charge of all SIM1 calls;
Reset: Clear the expense of all SIM1 calls;
Expense limit: Limit SIM1 call expense in specified amount. You need to enter the PIN2 code to set the call expense.
Price & rate: This function requires network support. Please contact your network operator for details.
SIM2 call expense: Requires network support.
Last call: Check the charge of last SIM2 call;
All calls: Check the charge of all SIM2 calls;
Reset: Clear the expense of all SIM2 calls;
Expense limit: Limit SIM2 call expense in specified amount. You need to enter the PIN2 code to set the call expense.
Price & rate: This function requires network support. Please contact your network operator for details.
SMS counter: View or delete the log of sent and received messages.
GPRS counter:
Last sent: View the sending flow of last connection.
Last received: View the receiving flow of last connection.
Total sent: View the sending flow of total connections.
Total received: View the receiving flow of total connections.
Reset: Clear the flow of all connections.
Auto time limit:
Setting: ON/OFF.
The limit is between 1 and 9999 seconds.
Note: SIM2 doesn’t support this function.
[General call settings]
SIM1 own number: Available options are Default, Hide and Send.
Default: Whether the phone sends own number depends on system default.
Hide: Do not send own number during call. If the system doesn’t support this function, you may be not able to make calls.
Send: Send own number during call.
SIM2 own number: Available options are Default, Hide and Send.
SIM2 default: Whether the phone sends SIM2 own number depends on system default.
SIM2 hide: Do not send SIM2 own number during call. If the system doesn’t support this function, you may be not able to
make calls.
SIM2 send: Send SIM2 own number during call.
Note: This function needs network support.
Call waiting: Set to activate or deactivate the call waiting. For call holding and multi-party conference, you need to activate
this function first. It requires network support.
SIM1 (SIM2) call diverting: This function is a network service and you need to subscribe from the network operator first.
This function can divert the qualified calls to specified telephone number.
Name Description

17
Unconditional Divert all incoming calls
If not available If the network can’t connect to your mobile phone (power off or out of service area),
it will divert the incoming calls for you.
If not answered If you don’t answer the calls in specified time, the network diverts the call for you.
If busy When you are calling, the network diverts the incoming call.
Divert all data calls Need network support
Cancel diverting Cancel all diverting settings.
SIM1 call barring:
Outgoing calls:
1. All calls: Set call barring for all outgoing calls of SIM1.
2. International calls: Set call barring for international calls of SIM1;
3. International except domestic: When you are abroad, you can only call the numbers from the country you locate and
home country (i.e. the country where your network operator locates).
Incoming calls:
1. All calls: Set call barring for all incoming calls of SIM1.
2. Roaming calls: Set call barring for all calls of SIM1 except the calls from the numbers in local service area.
Cancel barring: Cancel call barring settings of SIM1. In this case, you can make and answer calls normally.
Change password: Change the password of call barring for SIM1.
SIM2 call barring:
Outgoing calls:
4. All calls: Set call barring for all outgoing calls of SIM2.
5. International calls: Set call barring for international calls of SIM2;
6. International except domestic: When you are abroad, you can only call the numbers from the country you locate and
home country (i.e. the country where your network operator locates).
Incoming calls:
3. All calls: Set call barring for all incoming calls of SIM2.
4. Roaming calls: Set call barring for all calls of SIM2 except the calls from the numbers in local service area.
Cancel barring: Cancel call barring settings of SIM2. In this case, you can make and answer calls normally.
Change password: Change the password of call barring for SIM2.
Blacklist: Enable blacklist and the numbers in the blacklist will be rejected automatically.
Minute alert: Give you one or periodic alert tone in the calling process so that you can know the call time. You can also
disable the alert tone.
Call time display: Display the call time in the calling process.
Auto redial: Select ON or OFF for auto redial in this option. If the first call isn’t connected successfully, the mobile
phone will redial for ten times at most automatically.
Speed dial: Enable/disable speed dial and edit the numbers of speed dial.
IP call: Add or edit the numbers for IP call.
Note: Some settings need network support. Call barring needs local network support and you need to apply this service
first.
6.4 Services
With this function, you can access the services on the Internet, including weather, news, financial info, etc. This service is
provided by network operator. New menus appear according to SIM card. It is invalid if the SIM card and your network operator
don’t support this function. Please contact your network operator for more information.
M-Zone SIM card
WAP
Homepage – Connect to the website in the setting.
Bookmark – Access the options and perform the following operations:
Web history: record 10 recent web history entries.
Saved websites: Record saved websites.
Enter web address: Enter web address and log in the site.
Service Inbox: The mobile phone can receive the service message (push message) sent by your service provider.
For instance, the service message may be a notice of news summary which may be a text message or provide a WAP site.
Settings
Editing setting
China Mobile
Activate setting
Edit setting
Change option name – Set the name
Homepage – Edit the web address.
Account – Select network account.
Connection type – Continuous, intermittent and HTTP.
User account – Edit user name.
Password: Set the password.
Note: The settings of other WAP options are same to China Mobile.
Browsing option – Set the waiting time and whether display picture.
Service message setting – Select ON or OFF.
Clear cache – Clear the cache. The internet surfing speed will be affected if the cache is full.
Clear personal data – Clear personal data.

18
Account data
GSM data – Use GSM data to provide the following account data, e.g.:
China Mobile
Name: China Mobile
Number: 17266
User account: wap
Password: wap
Line type: ISDN, analog
Speed: 9.6Kbps, 14.4 Kbps, 4.8 Kbps
Net domain: 010.000.000.172
GPRS– Use GSM data to provide the following account data, e.g.:
China Mobile GPRS
Name: China Mobile GPRS
GPRS connection: cmwap
User account: wap
Password: wap
Authentication mode: common, encrypted
Note:
Please contact local network operator for the details of tariff and specific settings.
The mobile phone only provides the settings of China Mobile. For other settings, please consult local network operator.
SIM2 doesn’t support WAP.
6.5 Messaging
SMS
Short messaging is a network service. To send or receive short messages, you may need to subscribe for this service from
your network operator.
This mobile phone supports short messages. The short messages are sent to the message center and then to the recipients
(GSM subscribers). The short messages are saved in the network if the mobile phone of recipient isn’t switched on or can’t
receive short messages (memory is full). The validity depends on user’s settings and network operator.
With SMS, you can send and receive chain text messages, which may affect the charge of messaging. Please contact your
network operator for details.
If the memory is full, an icon will flash in the top line of the screen; since the mobile phone supports dual SIM cards, the
messages are saved in SIM1 and SIM2 separately, and the prompts appear separately. To receive new messages normally, delete
the short messages in corresponding SIM cards.
If the recipient has received the message, the mobile phone sends an alert tone of message report (report is enabled).
Note: When you send message via SMS service, the mobile phone may display “Sent”. It indicates that the message has
been sent to the SMS center. But it doesn’t mean that the recipient has received the message. Contact your network operator for
more information.
Inbox
You can read the received short messages in the Inbox, including SIM messages and SIM2 messages.
Reply: Reply in text message with SIM1 or SIM2.
Delete: Delete the message.
Edit: Edit the message or send later.
Forward: Forward the message to another recipient.
Copy to SIM: Copy the messages from SIM card to mobile phone.
Move to SIM: Move the messages from SIM card to mobile phone.
Delete all: Delete all the messages in the Inbox of corresponding SIM card; if SIM1 is selected, all the messages in SIM1
will be deleted; if SIM2 is selected, all the messages in SIM2 will be deleted.
Copy all: Copy all messages from SIM card to mobile phone, or vice versa.
Use number: Save or call the numbers in the received message.
Move all: Move all messages from SIM card to mobile phone, or vice versa.
Use link: Connect to the link in the received message.
Outbox
Select “Save and send” when sending message, the message will be saved in Outbox; if SIM1 is selected, the message will
be saved in SIM1 Outbox; if SIM2 is selected, the message will be saved in SIM2 Outbox; you can also save the message in
Outbox directly. In this case, "No number" appears in the Outbox, i.e. no recipient. If the message isn’t sent successfully, the
message also will be saved in the Outbox. You can perform the following operations to the short messages saved in Outbox: Send,
Edit, Delete, Delete all and Use number.
New message
You can create short messages in this menu.
Each message may contain 160 characters. While editing the message, click the “Input method” icon with the stylus to
switch the input method. Click the “》” icon on the simulation keypad to select symbol; click “Delete” to delete one character
before the cursor, or click and hold “Delete” to clear all characters; click the End key to return to standby; press the Left/Right
key to select the character and click Select to enter the character. (You can also select the character with the stylus directly.)
When editing messages, the size of Chinese characters can’t be changed, while the letters and numbers can be changed.
This mobile phone supports group messages with more than 70 characters each (the characters limit of common text
message). If the message contains more than 70 characters, the phone sends it in two or more messages.

19
Option Function
Text format Set text size, font, alignment and paragraph; the setting of character size only affects English
and numbers, and the Chinese characters won’t be affected.
Insert object Insert picture, my picture, default video, my video, ringtone, my ringtone or default melody.
Insert number Insert a number saved in the Contacts
Insert contact Insert a contact name
Insert bookmark Yahoo and Sina are available
Input method Smart pinyin, capitalized English, small English, number and stroke input methods are
available
Templates Ten preset messages are available
Note: This service is available only when the network operator supports. Only the mobile phone that integrates image
function can receive and display the picture information normally.
Templates
Edit or delete the templates.
SMS settings
You can set the SMS parameters in this menu.
Mode setting: Enter local SMS center number to send short messages.
Note: The number of SMS center is provided by the network operator.
Status setting:
Message report: The network notifies whether the recipient has received the message and the receiving time.
Reply path: Transfer the replay path to the network, and this function requires the support of SMS center.
Memory status: You can check the memory status of the SIM cards or mobile phone in this menu.
Storage position: Set the storage position of the messages (SIM card or mobile phone).
(The four options apply to SMS settings of SIM1 and SIM2.)
Sending setting: GPRS first, GSM first, or GSM only. GSM first is the default option.
(This setting only applies to SIM1 setting)
MMS
The multimedia message may contain text, sound clip and picture. The mobile phone can receive multimedia message up to
1141kb. The mobile phone can’t receive the multimedia message with size beyond the limit.
If the multimedia message contains picture, the mobile phone will adjust the picture automatically to make it displayed on
the screen.
The displaying effect of the multimedia message depends on the receiving device.
Note: This service is available only when the network operator supports. You can receive and read the multimedia
messages with a device that is compatible with MMS or e-mail.
New multimedia message
Recipient
Insert number – Enter the telephone number of the recipient.
CCInsert number – Enter the telephone number of the recipient.
BCC
Insert number – Enter the telephone number of the recipient.
Subject: Edit the subject of the multimedia message.
Editing content
Edit the multimedia message, and press OK to enter the options:
Done: (in mobile phone: after editing the recipient number) the following options are available: 1. Send; 2. Save
and send; 3. Save in Drafts; 4. Sending options; 5. Exit.
Insert:
◆Picture: Insert picture
◆Sound: Insert sound
◆Video: Insert video
◆Contact: Insert contact
◆New page: Insert a new page
Delete: Delete the page;
Go to: Go to next page
Preview: Preview the multimedia message;
Settings: Set the playing time, text and SML of the multimedia message;
Input method: Select appropriate input method.
Inbox: Read the received multimedia message in Inbox and perform the following operations:
Read: Read the multimedia message, and save the picture, sound and attachment;
Details: View the details of the message.
◆Use number
Reply: Reply in multimedia message;
Forward: Forward the multimedia message to another recipient;
Delete: Delete the multimedia message;
Delete all: Delete all the multimedia messages in Inbox;

20
Use number: Save or call the numbers in the received message.
Outbox: Read the sent, saved and unsent multimedia messages, and perform operations such as read, details, forward,
delete, delete all and use number.
Drafts: Save the edited multimedia message and perform operations such as read, edit, delete, delete all, use details and
send details.
Details: View the details of the message;
◆Use number
Templates: The mobile phone has five preset multimedia messages. You can perform operations such as read, details, and
create new message with templates; you can also customize the templates.
MMS settings: You can set the MMS parameters in this menu.
Editing setting:
Editing mode: Two editing modes are available: unlimited and limited.
Image zooming: 160*120, 320*240 and OFF.
Auto signature: After editing the signature, show/hide the name of the sender.
Edit: Edit the auto signature.
Sending settings:
Validity – Set the saving and sending time of short messages in service center, including one hour, six hours, 12
hours, one day, one week and maximum.
Sending report – Enable/disable sending report.
Reading report - Enable/disable reading report.
Priority – Select the priority of sending MMS: Common, High, and Low.。
Page time – Set the time interval of reading multi-page multimedia message. (Default: 5sec)
(Maximum:60sec)
Sending time: Real time, one hour, 12 hours or 24 hours.
Receiving setting:
Filter: Anonymous sender – Allow/Return
AD message - allow/return
Server setting:
CHINA MOBILE MMS
Activate setting
Edit setting
Change option name – Set the name
Homepage - Edit the web address of multimedia message (e.g.: China Mobile: http://mmsc.monternet.com)
Network account – China Mobile GPRS
Connection type – Continuous, intermittent and HTTP.
User name – Edit user name.
Password: Set the password.
Other settings of MMS are same to China Mobile MMS.
Memory status: View the usage rate, occupied space and memory of the mobile phone.
Chat
Two chat rooms are available. You can set My nickname and recipient, and then select Start chatting.
Voice mail
SIM1 voicemail
Voicemail is a network service. You need to subscribe for this service first. Please contact your network operator for more
information.
Connect to voice: Call the voice mail number saved in the list. If you have two telephone numbers, you can customize the
voice mail number for each number respectively.
Edit: Edit the voice mail number, and press OK to save the number.
Note: In standby state, input the voicemail number and press and hold Number key 1 to call the voicemail. Set SIM1
voicemail and make the call with SIM1
SIM2 voicemail
Voicemail is a network service. You need to subscribe for this service first. Please contact your network operator for more
information.
Connect to voice: Call the voice mail number saved in the list. If you have two telephone numbers, you can customize the
voice mail number for each number respectively.
Edit: Edit or delete the voice mail number, and press OK to save the number.
Note: In standby state, input the voicemail number and press and hold Number key 1 to call the voicemail. Set SIM2 voicemail
and make the call with SIM2.
Cell broadcast
SIM1 cell broadcast
Cell broadcast is the service that the network operator sends messages such as weather report and traffic to the GSM
subscribers in specified area.
[Receiving mode]: Enable/disable message receiving.
[Read message]: If the cell broadcast is enabled, you can read the received messages.
[Language]: Set the language of received message.
[Channel setting]: Select, add, edit or delete the channel.