SUPERKIOSK M-215D User manual

① Release the lock with key and open the door. ② Set the printer head in the direction indicated by the arrow.
Place the printer paper on the paper rack as shown.
Cable exit
-Power cable
-LAN cable
Touch Monitor
Locking device
Receipt Exit Multi Card Reader
Rear cover
Front/Rear
■ Product I/O
∙ Be sure to read and use the manual before using it.
∙ Do not disassemble or modify this product; causes electric shock, fire, and failure.
In this case, you may not receive After Service.
∙ The shape and color in this manual may not be the same as real product.
■ Name and Function of each part ■ Power ON ■ Check Product Label
■ Printer Door Open/Close ■ Card Reader Use
［Front］
［Rear-Internal］
［Rear-External］
[HANASIS A/S]
∙ Address : 17, Saneop-ro 155beon-gil, Gwonseon-gu,Suwon-si, Gyeonggi-do, Republic of Korea 16648
■ Printer Paper(Thermal) loading
① Turn key to clock direction. ② Open door.
① Open door and press power button on the right top. ※ Please check the product model name and S/N
before requesting A/S
a
a
b
b
※ Key location: Cable exit ① If it is IC card, put the IC chip is on top. ② If it is Magnetic card, put the Magnet face is on top.
M-215D
기기(모델)명 :
제 품 코 드 :
정 격 전 압 :
제조자/제조국 :
인증받은 자 :
인 증 번 호 :
제조번호
M-215D (SMART KIOSK)
M-215D-00001A
AC-100-240V 50/60Hz
하나시스(주) / 대한민국
하나시스(주)
R-R-HS7-K-215L
M215D00001A-18B001
M-215D
USER MANUAL

■ Power cable connection method
① Connect the power cable to the power socket.
② Lower the power cable to the stand body
through the inside path.
③ Secure the stand cover and fix with 1x screw.
※ Place the cable in a prove to prevent it from being twisted.
④ Connect power to the power outlet.
⑤ Release locking device by key and open door and
press power button located inside to run the system.
※ When assembling the stand, please be careful not to happen
fall accident since the product is heavy
① Put the stand base on the floor and settle the stand body
and fix tightly with two screws at the front and rear.
②Attach the stand and the product with 4 screws.
■ Adjustment Foot (Optional item)
※ If the floor is not flat, you can use the adjustment foot.
Screw x4
Stand base
Adjustment foot
① Use the adjustment foot after assembling the stand.
② Rotate the adjustment foot counter clockwise and
fix the product.
■ Stand Shaking protection method
※ If the floor is not flat, you can use rubber footpad.
Stand base
Adjustment foot
① After assembling the stand, attach the rubber
footpad to improve shaking.
Screw x2
Screw x2
Base stand
Stand Body
■ WALL MOUNT
∙ Be sure to read and use the manual before using it.
∙ The shape and color in this manual may not be the same as real product.
■ Stand Installation ※ stand is optional item.
① Break through the
wall and fix wall-mount
bracket plate with
fixed 4x Screw.
※ In case of Desk
top type, please
remove bottom
plate and install it.
② Set the body on the
fixed wall-mount
bracket plate.
③ Fix wall-mount
bracket plate and
the body with
4x Screw.
※ Multi-tap storage function
Stand body
(internal path)
M-215D
USER MANUAL
[HANASIS A/S]
∙ Address : 17, Saneop-ro 155beon-gil, Gwonseon-gu,Suwon-si, Gyeonggi-do, Republic of Korea 16648
stand cove
screw