SuperLightingLED C5304RF User manual

SUPERLIGHT
WWW.SUPERLIGHT.COM.AU Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963
All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of
errors, updates or omissions. Please re-confirm all product details prior to ordering.
Document Type: Product Data Sheet Website Short Name: C5304RF
Website Main Categories:
Website Sub Categories:
Published Online Y/N?:
Added to CRM?
TYPICAL APPLICATIONS
Domestic, commercial RGBW LED lighting installations.
Special RGB or RGBW functions, signage, displays, retail, event lighting and more
Superlight constant voltage RGBW LED strips, modules and fittings.
CONTROL & DIMMING OPERATION
Control and dimming operation is achieved by use of the digital rotary dials which
gives the user manual control of the RGBW output channels to mix desired RGBW
settings and colours. Additionally the RF remote handset can be used for wireless
control.
CUSTOMISATION OPTIONS
Full system and wiring diagrams available by special request
Superlight can design and supply dimming control or RGBW control systems
C5304 is compatible with Superlight signal repeaters for more complex installations
Custom options may be subject to minimum order quantities
3D MODELS AND LIGHTING DESIGN
Superlight can provide detailed 3D modelling and lighting design services for your
project, including wiring schematics and lighting control system design. Contact us
for more information.
Optional Content:
ORDERING INFORMATION
C5304RF-00 4-Channel Digital RGBW LED Colour Controller 12V/24V
C5304RF DIGITAL RGBW LED CONTROLLER
C5304RF is advanced pre-programmed RGBW controller suitable for Superlight
12VDC and 24VDC color-changing LED products. The controller is simple to use and
features on/off control, brightness control, single-colors, RGBW colour animations,
multi-color management, gradual and rapid color fading, adjustable speed control,
and dimming (brightness control). By integrating SL5212 repeaters (available
separately), the controller can extend the control capabilities to an unlimited
quantity of constant voltage LED fixtures, strips or modules.
SPECIFICATIONS
Input & Operating Voltage: 12/24VDC
Dimensions (L x W x H): 176x46x30mm
Maximum Power Output (A): 5A (Max) Per Channel
Maximum Power Output (W): 12VDC=240W / 24VDC=480W
Max Net Weight: 250g
Connection Method: Screw Terminals
IP Protection Rating: IP20
INSTALLATION GUIDELINES
IP20 Indoor Use Only
Ensure load does not exceed 5A per channel
Use only with approved 12/24VDC LED driver
MODES AND OPTIONS
37 Built in Pre programmed RGBW Modes
16 Variable Speed Settings
16 Brightness Settings with Dimming Control 0-100%
Static Colour and Animated RGBW Modes
Rotary Dials Allow Precise Setting of RGBW Levels to Mix Desired Colours

SUPERLIGHT
WWW.SUPERLIGHT.COM.AU Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963
All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of
errors, updates or omissions. Please re-confirm all product details prior to ordering.
Document Type: Product Data Sheet Website Short Name: C5304RF
Website Main Categories:
Website Sub Categories:
Published Online Y/N?:
Added to CRM?
3D MODELS AND LIGHTING DESIGN
Superlight can provide detailed 3D modelling and lighting design services for your
project, including wiring schematics and lighting control system design. Contact us
for more information.
Optional Content:
Sign Button
ON/OFF
PAUSE
MODE+
MODE-
SPEED +
SPEED-
BRT+
BRT-
Description
ON/OF: Turn on/off the controller
Any button can start the controller at off status
PAUSE: Press this button will rest at current color,
press it again, will continue to change.
Mode+： Press this button to select next mode .
Hold the button for 3 seconds, when the led flashes
three times, the controller enters into cycle mode.
Mode-： Press this button & back to previous mode.
Hold the button for 3 seconds, when the led flashes
three times, the controller enters into cycle mode.
Speed+： Press this button to select 1-16 speed changing levels,
speed up. Hold the button for 3 seconds, when the LED flashes
3 times, it indicates the speed of all modes have been reset to default.
Speed-： Press this button to select 1-16 speed changing levels,
speed down. Hold the button for 3 seconds, when the LED flashes
3 times, it indicates the speed of all modes have been reset to default.
BRT+： Press this button to select 1-16 brightn e ss a d j ustment levels.
Bright n ess u p . Ho l d th e but t o n fo r 3 second s , whe n the LED flashe s
3 times, it indicates the brightn e ss o f all modes have been reset to defaul t .
BRT-： Press t h i s button to select 1-16 b r i g h t n e s s adjustment levels.
Brightness d o w n . Hold the b u t t o n for 3 seconds, when t h e LED f l a s h e s
3 t i m e s , it indicates t h e brightness o f all modes h a v e been r e s e t to default.
PAUS E
MODE
MODE
BRT
BRT
SPEED
SPEED
PAUS E
LED CONTROLLER
MODE MO DE
SPEED
SPEED
BRT B RT
RF Remote Control Handset
For new RF remote handsets (eg in the event of replacement remote handset) the new handset must
be first initially paired to the controller.
To pair the remote handset; long press ON/OFF button on the controller, after the indicator light
flashes, press pause key on the remote control, when the light flashed again.
Handset Battery:
Remote handset requires 1 x battery (available seperately, battery not included)
RF Remote Handset - Description of Operations:
Static blue
Dynamic mode:
Examples of mode settings for static colour output:
Four (4) analogue dials are included which can each manually control individual channels
on the controller.
When operating the rotary dials, the digital LCD displays the corresponding channel
brightness value (0-255 scale)
When accessing a built in mode via the remote handset, the LCD will indicate the current
mode, speed and brightness
Static red
Static green
Mode 4 Speed level 10 Brightness level 6
When there is an error state including overload or short-circuit, the controller will
automatically shut off and the LCD display may indicate ERR, as per below example:
Resolving the overload or short-circuit condition will usually restore the controller to
normal operation. Warning: prolonged over-load or short circuit will risk permanent
damage.
W
OUTPU T: 5A×4 CH
INPUT: DC 12V- 24V
RGBW CONTROLLER
Static white
Built in Programs (Modes):
C5304RF features 37 built-in dynamic modes which can be accessed by using the mode
keys on the RF handset. By operating Mode+ / Mode - the controller will a scroll to the next model in
accordance with the table below.
Model
Cyan fading
White fading
RGB fading
Red green smooth
Red blue smooth
Green blue smooth
Red yellow smooth
Green cyan smooth
Blue purple smooth
Red purple smooth
Blue cyan smooth
Red white smooth
Green white smooth
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DIY static color
Static red
Static green
Static blue
Static yellow
Static purple
Static cyan
Static white
3 color skipping
7 color skipping
White strobe
3 color strobe
7 color strobe
White speed-up
strobe
Mode
No.
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Mode
No.
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Model
Yellow purple
cyan smooth
Red fading
Green fading
15
16
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Full color smooth
Cycle mode
Blue white smooth
34
35
36
37
White strobe increasingly
17
18
19
Blue fading
Yellow fading
Purple fading
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Green yellow smooth
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
All recycling
Remark Remark
Brightness, speed adjustable
Brightness, speed adjustable
Brightness, speed adjustable
Warnings & Use Guidelines
Electrical and lighting installation must only be carried out by suitably qualified electrical installer.
Test all devices in a controlled environment first. Ensure there is strong familiarity will all
components and functions before commencing installation.
Only use this controller with an approved 12VDC or 24VDC constant voltage power supply.
Do not overload the controller and ensure correct wiring polarity at all points throughout the
installation
Isolate all power before installation and during wiring & connection C5304RF contains no user
serviceable components and should not be used if damaged in any way. IP20 for indoor use only.