Sven RX-100 User manual

RX-100
ENG
USER’S MANUAL
Congratulations on purchasing
the SVEN mouse!
Please read this User’s Manual before
using the unit and retain this User’s Ma-
nual in a safe place for future reference.
COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained
in it are copyrighted. All rights
TRADEMARKS
All trademarks are the property of their
legal holders.
NOTICE OF RESPONSIBILITY
RESTRICTION
Despite the exerted eorts to make this
Manual more exact, some discrepancies
may occur.
The information in this Manual is given
on«as is» terms.
The author and thepublisher do not bear
any liability to a person or an organiza-
tion for loss or damage which has arisen
from the information contained in this
Manual.
• Shipping and transportation equip-
ment is permitted only in the original
container.
• Does not require special conditions for
realization.
• Dispose of in accordance with regu-
lations for the disposal of household
and computer equipment.
SAFETY PRECAUSIONS
• Protect your mouse from high humi-
dity, dust or high temperatures.
• Do not use gasoline, spirit or other dis-
solvents for cleaning. This may cause
damage to the surface. Clean the device
with soft cloth.
• Do not attempt to disassemble or re-
pair your device.
• Protect the device against powerful
shocks and falls — they may damage the
internal electronics.
APPOINTMENT
RX-100 is an input device. It is designed
to input (to enter) information into PC
and operate it.
PACKAGE CONTENTS
• Wired Mouse — 1 pc
• User’s manual — 1 pc
SPECIAL FEATURES
• Special buttons for functions “Copy (top
left)/Paste (top right)”
• Adjustable sensivity up to 4000 DPI
SYSTEM REQUIREMENTS
• Windows
• Free USB port
CONNECTION AND INSTALLATION
Connect the mouse to an available USB
port of your PC. Turn on your PC. Instal-
lation of themouse is automatic.

RX-100
TROUBLESHOOTING
Problem Solution
The mouse
isnot working.
1. Disconnect the mouse from your PC and check the connector
pins
for possible damage. If there is no external damage found
andthe connector pins are OK, connect the mouse to your PC again.
2. Address your nearest authorized service center.
If none of the above mentioned solutions removes the problem, please consult a near-
est authorized service center. Never try to repair the device on your own.
Technical support: www.sven.fi.
1B0310