swamp A3 User manual

SWAMP A3
ANC Bluetooth Headphone
User Manual
Contents:
1. Product Overview --------------------------------------- 2
2. Basic Operation ---------------------------------------- 3
3. Bluetooth Pairing and Connection ------------------- 4
4. Connection with Two devices -------------------------- 5
5. LED Indicator ------------------------------------------ 6
6. Charging -------------------------------------------- 7
7. AUX Wired Connection ------------------------------- 8
8. ANC Function --------------------------------------------9
9. Product Specification ---------------------------------- 10
10. Attentions and Q & A----------------------------------11
Product Overview:

Package Contents：：
Bluetooth headphone x 1
3.5mm audio cable x 1
Micro charging cable x 1
User manual x 10
2. Basic Operation:
Button
Function
Operation Instruction
MFB
Play / Pause
Short press (when play music)
Redial a call
Double press
Doubl
Voice dialing
Long press for 1 second
Answer a call
Short press (when call coming)
Hang up a call
Short press ( during a call )
Reject a call
Long press one second (when call coming)

Microphone mute
Double press to mute the microphone.
Press again to cancel microphone mute (
during a call )
Switch On & Off
Power on
Switch to On , power on and enters into
pairing mode automatically with Red & Blue
LED flash alternately
Remarks: Headphone will research& reconnect
with the paired device when power on.
*如有配对记录，每次开机将会尝试回连曾经
连接过的设备
Power off
Switch to Off, LED turn off
Volume +
Volume up
Short press( when playing music or calling)
Next song
Long press ( when playing music )
Volume -
Volume down
Short press( when playing music or calling)
Previous song
Long press ( when playing music )
ANC switch
ANC on
Switch to ANC (When off / Bluetooth / AUX
mode)
ANC off
Switch to another side (When off/ Bluetooth
/ AUX mode)
3. Bluetooth Pairing and Connection:
A. Switch to “ＯＮ”, A3 power on and enter into pairing mode automatically
with Red & Blue LED flash alternately.
B. Search and click to connect “A3” on your phone Bluetooth lists, LED
change to Blue LED low flash after connected. Play music from phone to
headphone.
C. Control to answer/hang up a call, music play/pause/previous/next, volume
up/down etc through the MFB /Volume +/Volume- buttons.

4. Connection with Two devices:
A. Follow part 3 to connect with first phone, and turn off the Bluetooth function
of phone.
B. Power off A3, power on again to enter into pairing mode automatically with
Red & Blue LED flash alternately.
C. Search and click to connect “A3” on second phone Bluetooth lists, LED
change to Blue LED low flash after connected.
D. Turn on Bluetooth function of first phone, click to reconnect “A3”on
Bluetooth lists. Headphone connected with two phones.
Notes:
Only could play music or answer call from one phone, need to stop one to play
another.

5. LED Indicator
Mode
LED Indicator
Power on
Blue LED flashes twice
Power off
Red LED turn off
Pairing mode
Red & Blue LED flashes alternately
Connected standby / play music /
call mode
Blue LED flashes once every 10
seconds
Delete paired record
Blue and Red LED flashes once at the
same time
Charging
Solid Red LED
Full charged
Solid Blue LED
Low battery
Red LED flash
ANC On
Solid Green LED
ANC Off
Green LED turn off

6. Charging
Please charge the A3 at once, when the Red LED flash. Charging time about
2 hours. Solid Red LED change to solid Blue LED when full charged.
Plug one end of micro USB cable to A3, another end to USB charger (Car
charger, power bank or PC etc )
Notes：
1. Please charge the item at least once for every 2 months when without use.
2. Charging when the item power on, it will reset automatically and power off.
AUX Wired connection :
Plug one end of 3.5mm cable to the audio interface of headphone, another end connect
to phone or PC audio port.

Notes:
The buttons of headphone are invalid when AUX mode.
AUX function could be work when battery out of power or item power off.
Bluetooth function will power off when plug AUX cable in ( On mode).
ANC Function
ANC Function could be use at power off / Bluetooth / AUX mode, it could reduce the
noise heard from around (such as airplane, train etc.) Switch to ANC to power
on the function with solid Green LED. Or enjoy the excellent music with power off
the ANC function (Green LED turns off.)

Notes:
Pls power off the ANC function when walking on the load to keep yourself in safe.
Pls pay attention to your airplane or train messages when you use ANC function on the
airplane or train station.
Enjoy the excellent voice of the phone when without ANC function.
Pls turn off the ANC function to safe power when without use.
Product Specification:
Bluetooth Version
V4.2
Bluetooth Chipset
CSRA64215
Operation Range
10 meters
Bluetooth Protocols
HSP,HFP,AVRCP,A2DP
CODEC Code
aptX™ low latency, aptX™, SBC
Built-in Li-ion Battery
400mAh/3.7V
Charging Time
About 2.5 hours
Stand-by Time under
Bluetooth mode
200 hours
Working Time
About 24 hours（50% Volume, ANC:OFF, BT:ON）
About 12 hours（50% Volume, ANC:ON, BT:ON）
About 16 hours（50% Volume, ANC:ON, AUX:ON）
Net Weight
About 268.8 g
Dimension
210*155*83 mm

Notes:
The actual using time will be different according to the ambient and music style.
10. Attentions and Q & A :
A. How to reconnect and operation when failed to reconnect ?
When A3 connected with your mobile phone successfully at the first time, it will search
and reconnect the paired device automatically when power on If failed, please pair to
connect again.
B. How to Delete paired records.
Power on , long press “MFB & Volume+ & Volume –“ buttons 5 seconds at the same
time to delete paired records ( Red and Blue LED flashes once,). Pls try to delete paired
records when have connection problems.
C. What’s the password for pairing?
Some connection devices require password for pairing, pls try 0000 (four zero), 8888
(four eight), 1111 (four one) or 1234 ( one two three four).
D. Which devices could charge for the headphone?
Any car charger, power bank, PC etc which meet DC 5V , charging current more than
500mA could be charge for this item.