
Internet Ethernet
432
WPS
The Ethernet cable is only required for initial setup. Configure the Smart Hub to
connect to your Wi-Fi network directly during registration then go wireless.
Connect Ethernet cable Connect power adapter Find MAC ID Register Smart Hub
Broadband Internet router
Ethernet cable
Power adapter
Ethernet port
Power port
Connect the Smart Hub directly to your broadband router with the
included Ethernet cable.
Connect the included power adapter to the Smart Hub and then
plug it into a power outlet.
There is an information label located on the bottom of the Smart Hub
containing all the little details about your hub including it’s MAC ID. You
will need the MAC ID during registration, so have it ready on hand. It
looks something like the example below.
MAC ID: __ __ – __ __ – __ __ – __ __ – __ __ – __ __
1 2 3 4
INPUT:5V 2 A
This devic e compl ies wit h Part 15 o f the FCC R ules. O perat ion is su bject t o the
followin g two con ditio ns: (1) t his dev ice may n ot caus e harmf ul inte rfere nce, an d
(2)t his dev ice mus t accep t any int erfer ence re ceive d, incl uding i nterf erenc e that
maycauseundesired operation
MAC ID:X X-XX- XX-XX -XX-X X
FCC ID:V MISWO -HUB0 1K
S/No:XXXXXMMYYXXXXX
Model:SWO-HUB01K
IC:XX123A-B1234567890
Each USB :5V 500mA
DesignedinAustralia Madein China
Thi s devic e compl ies wit h Part 15 o f the FCC R ules. O
per ation i s subje ct to the
following two conditions:(1) this device maynot cause harmful interference,and
(2) this devicemust accept any interferencereceived, including interference that
may cause undesiredoperation
Model:SWO-HUB01K
IC:XX123A-B1234567890
Designed in Australia Made in C hina
MAC ID:AB-CD-E -1 2 -3 4 - 5 6F
Jot it down here!
Creating a SwannOne Account
Before you can register the Smart Hub, you will need to create a
SwannOne account. Your SwannOne account is what you use to control
and manage all your SwannOne devices and services from anywhere.
To sign up for a free account, go to home.swannone.com from your
PC, Mac, smartphone or tablet.
Installing the Smart Hub
Log in to your new SwannOne account at
home.swannone.com and then follow
the on-screen instructions to add the
Smart Hub to your SwannOne account.
If the Smart Hub cannot connect to the internet, try resetting it. Simply use a
straightened paperclip to depress the Reset button and at the same time hold the
WPS button until the status light on the front of the Smart Hub goes off.