SY Electronics HS12E-18G User manual

SY Electronics Ltd., 7 Worrall Street, Salford, Greater
Manchester, M5 4TH
Tel: [phone] – Fax: [phone]
Web: sy.uk
User Manual
HS12E-18G
1x2 HDMI 2.0 Splitter

sy.uk 2 V1.1
This 18GHz HDMI 2.0 splitter offers a solution to
distribute an HDMI signal to 2 display devices. This
splitter supports up to 4K2K @50/60Hz HDMI 2.0
signals with compliance to HDCP 2.2. They are ideal in
a variety of situations from digital signage, residential,
conference rooms and education establishments.
Features
Split a single HDMI input to 2 outputs
Supports all resolutions up to HDMI 2.0 (18GHz) (4K
@60Hz with 12-bit YCbCr 4:4:4)
Supports 3D at 1080p @60Hz and Compliant with
HDCP 2.2
Supports audio formats including LPCM 7.1CH,
Dolby TrueHD, and DTS-HD Master Audio
Smart EDID control
Usage Precautions
This HDMI Splitters should be installed in a clean
environment that has adequate ventilation, temperature
and humidity control.
All switches, plugs, sockets and power cables must be
insulated and safety approved. All devices should be
connected before powering on.

V1.1 3 sy.uk
Panel Descriptions
Front Panel
Item
Description
Numbered
LEDs
Lit when an HDMI signal is being
sent from the indicated HDMI
output
Power LED
Indicates that the splitter is
powered up
EDID Switch
Select one of several EDID options
Connection Procedure
Connect an HDMI source device (e.g. BluRay or
DVD) to the HDMI IN connector.
Connect display devices to the HDMI output
connectors as required.
Connect the 5V PSU provided to the DC input
connector.

sy.uk 4 V1.1
Rear Panel
Item
Description
HDMI IN
HDMI signal input connector
HDMI 1 &
HDMI 2
HDMI output connectors
Power Input
5V DC
EDID Management
The front panel EDID switch provides a range of EDID
options as detailed in the following table:
1234
EDID Setting
0000
4K60 2ch
0001
4K60 5.1ch
0010
4K60 7.1ch
0011
4K30 2ch
0100
4K30 5.1ch
0101
4K30 7.1ch

V1.1 5 sy.uk
0110
1080p60 2ch
0111
1080p60 5.1ch
1000
1080p60 7.1ch
1001
1080i60 2ch
1010
1080i60 5.1ch
1011
1080i60 7.1ch
1100
Pass Through
1101
MIX 1
1110
MIX 2
1111
HD1 Only
Pass Through Mode
This mode automatically passes the EDID settings from
the display device connected to the lowest numbered
output port. Thus, the EDID settings of any display
device connected to output 1 always overrides the EDID
settings of the display device connected to output 2.
MIX 1
This mode combines the EDID settings of the display
devices a select the lowest compatible video resolution
and the lowest compatible audio setting.

sy.uk 6 V1.1
MIX 2
This mode combines the EDID settings of the display
devices a select the lowest compatible video resolution
and the highest compatible audio setting.
HD1 ONLY
This mode will only pass though the EDID from the
display device connected to output 1.
Specifications
Connectors
Video Output
2x female HDMI (Type-A)
Video Inputs
1 x female HDMI (Type-A)
Controls
Panel Control
EDID Mode Switch

V1.1 7 sy.uk
Video General
Resolutions
All resolutions up to 4K2K @ 60Hz,
12-bit YCbCr 4:4:4 (18GHz)
480i – 1080i, 480p – 1080p, 1080p
3D, 4K2K 24/30/60 – All PC
resolutions
All PC VESA mode video format
resolutions up to QSXGA @60Hz
Standards
HDMI 2.0, HDCP 2.2, CEC
General
PSU
5V DC @ 1A
Consumption
< 5W
Dimension
(W*H*D)
216 x 34.3 x 105.3 mm
Weight
655 g
Temperature
0 ~ 40℃
Humidity
10% ~ 90% (non-condensing)

sy.uk 8 V1.1
After Sales Service
1. Should you experience any problems while using this
product, firstly refer to the relevant section in this manual
before contacting SY Technical Support.
2. When calling SY Technical Support, the following
information should be provided:
Product name and model number
Product serial number
Details of the fault and any conditions under which the
fault occurs.
3. This product has a two year standard warranty, beginning
from the date of purchase as stated on the sales invoice.
For full details please refer to our Terms and Conditions.
4. SY Product warranty is automatically void under any of the
following conditions:
The product is already outside of its warranty period
Damage to the product due to incorrect usage or storage
Damage caused by unauthorised repairs
Damage caused by mistreatment of the product
5. Please direct any questions or problems you may have to
your local dealer before contacting SY Electronics.