Sylvac D300s User manual

D300S

Universal display unit

Swiss manufacturer of precision measuring instruments since 1969

Quick installation guide

Firmware 1.21

E

3

Index

1. Overall view 4

1.1 Description 5

2. Start-up 6

3. User interface 6

3.1 Channel configuration 7

3.2 General unit configuration 8

4. Transfer and print data 9

5. Packaging 10

6. Accessories 10

E

1. Overall view

Front - Interface

Back - Connectors

4

12

7

1 3 4

6

5

17 1618

9

2

13

10

11

8

1415

E

1.1 Description

5

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

8.5’’ touch screen

Conﬁgurable user interface

IP65 front panel

Navigation buttons

Numeric keypad

Standby button

Master switch for the unit

Connector for 24V power supply

USB ports for SYLVAC instruments, keyboard or mouse

USB port D300S -> PC

LAN port

SYLVAC probe inputs (4-input module available)

Digital inputs/outputs

External contacts (pedals, limit switch etc.)

Jack socket for speakers

VGA output

RS485 connector for connecting D302/D304 units

RS232 input for SYLVAC instrument

E

2. Start-up

When you ﬁrst switch on your D300S unit, the default interface will be active

as shown below.

When the unit is switched off, your last deﬁned parameters will be retained

when the unit is next used.

It is possible to save your conﬁgurations in order to use your D300S for sev-

eral different workstations (see chapter 3.2).

When an instrument is connected, it is automatically assigned a channel.

The cable’s identiﬁcation address is registered by the unit .

It is therefore vital not to switch it with other instruments. If you disconnect

the cable from the unit and use a different USB port when you next connect

it, the same channel will be reassigned to it.

3. User interface

Window showing details of channel X

Active page indicator

Select page X/X

Conﬁgure number of screens (max. 8/page)

General conﬁguration

Display type (measurement or statistics)

Individual preset for channel

Reset channel

Conﬁgure channel

Record measurements

Clear all displayed channels

Preset all displayed channels

1

2

3

4

5

6

7

8

9

10

11

12

6

1

3 4 5 6

10

11

12

8

2

7 9

E

3.1 Channel configuration

Press the button to access the conﬁguration menu.

You will be able to enter the values and other parameters necessary for your

control process.

In the vertical menu, 2 buttons allow you to switch between basic and ad-

vanced conﬁguration.

The area shown here allows you to select a predeﬁned meas-

uring type, e.g.: A+B.

A second ﬁeld (B) will appear in order to allow you to select the instrument

that will be associated with it.

List of instruments connected and available for selection

7

E

3.2 General unit configuration

Menus that allow you to conﬁgure the general parameters of your unit.

Examples:

Lock keyboard and touch screen,

and deﬁne exceptions if required

Create measurement sequences and

conﬁgure external contact

Save and load conﬁgurations and

factory settings

8

E

4. Transfer and print data

Your D300S unit allows you to transfer data via USB stick, PC and PCL6 print-

ers (HP, Xerox etc.). Please ensure that the printer is 100% PCL6-compatible.

Advanced conﬁguration window Conﬁguration window for digital ter-

minal and external contacts

Window that allows you to view, trans-

fer and print the recorded values for

each channel

Select the information that will be

printed when it is sent by pressing

the pedal or external contacts

Note:

Sequences of measurements or several channels can only be printed using a

pedal or external contact.

A short press on the pedal sends the value in memory to the printer. A long

press (>1s) prints the values.

9

USB

E

6. Accessories

VESA-compatible mounting bracket

Order no.: 804.6005

Oil-resistant PVC dust cover

Order no.: 804.6001

5. Packaging

Protective foam

D300S display unit

Packaging containing:

• 24V / 100-230V charger

• Power cable depending on country

• Pedal

Outer box

1

2

3

4

The box contains the objects listed below.

It is important to retain this packaging in case the product needs to be re-

turned to the factory for servicing or repair.

10

1

23 4

E

Notes

11

.............................................................................................................................

............................................................................................................................

.............................................................................................................................

We reserve the right to make changes

Edition 2012.07 / V1.0 / Quick_Start_D300S_F

681.261..20

Ch. du Closalet 16

CH - 1023 Crissier

E-mail: [email protected]h

www.sylvac.ch

Sylvac D300S User manual

Popular Monitor manuals by other brands