Sylvania Roadsight Stealth Instruction Manual

ROA D S I GHT
Dash Camera
Caméra-témoin de circulation
Cámara Delantera

1
The Dash Cam must not be fitted in a position which obscures the driver’s view of the road ahead.
Depending on the country of use, recordings made with this device may be subject to Data
Protection Laws. Ensure these are complied with. If the dash cam is to be used in a commercial
environment e.g. taxi or truck, then CCTV Regulations may apply. Playback of video which is
visible to the driver while the vehicle is in motion is prohibited in some countries. Only use the
supplied power adapter, otherwise damage may occur to the dash cam. Take care when cleaning
the dash cam lens and only use a suitable lens cleaner and a soft cloth. Do NOT expose this
product to rain, moisture or water under any circumstances; doing so may result in the risk of
electric shock or fire. Do NOT perform servicing other than that contained in the instruction
manual, unless you are qualified to do so. When installing in a vehicle, always place the device
securely against the windscreen and where possible conceal the power cable under the vehicles
interior trim. Make sure that the power cable doesn’t interfere with the driver’s controls such as the
steering wheel, pedals or gear lever. Do NOT mount the dash cam in front of an airbag
deployment area or in a position to obscure any interior mirrors. Do NOT operate while driving and
only adjust settings or review recordings while not driving.
WARNING

If you haven’t already downloaded the app, do so now to
get the most from your dash camera.
1 Download the app by searching for SYLVANIA
CONNECT in the App Store (iPhone) or Google
Play (Android).
2 Open the app, follow the setup process shown
and enable all necessary settings when prompted.
BEFORE YOU BEGIN

1 Dash Cam
2 Quick Start Guide
3 Magnetic Mount
4 USB Charging Cable
6 Trim Removal Tool
7 Window Sticker
8 SD Card
PACKAGE CONTENTS
RECORDING GRABANDO NOUS ENREGISTRONS

ATTENTION! Choose the installation location in advance, as the adhesive tape on
the mount is of single use.
1 Ensure glass is dirt, dust and grease free.
2 Warm adhesive pad part of mount in hands to ensure strong adhesion to glass.
3 Once mount has been positioned connect dash camera to the magnetic mount.

To power the device and charge the battery, use only the power adapter included. Connect the
power cable to the mount, and then plug the USB charger into the vehicles 12v power socket.
When the vehicle’s engine starts, the device turns on automatically.

1 Before installing a memory card, make
sure the device is turned off.
2 Insert the memory card until it clicks into
place.
3 Removing a card: press the card slightly
and then remove it from the slot.
INSTALLING microSD CARD
WARNING! Do not apply excessive force when inserting a memory card to avoid
damage to the device. If necessary, use a thin pointed device to push the card
further. To remove the memory card, push the card until it clicks and remove the
card from the slot.

TURNING ON / OFF
•When the vehicle ignition is turned ON
the dash cam turns on automatically.
•To turn the device on manually, press
the power button.
•To turn the device off press and hold the
power button for approx. 3 seconds.

CONNECTING TO MOBILE
1 Your camera automatically
broadcasts a Wi-Fi network.
2 Open your phone’s Settings.
3 Tap on Wi-Fi or Connections.
4 Select the dash camera
hotspot and enter the
password “12345678”.
5 You are now connected to
your device.
Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
Settings
SAMPLE_NETWORK i
DashcamStealth i
SAMPLE_NETWORK i
SAMPLE_NETWORK i
SAMPLE_NETWORK i
SAMPLE_NETWORK i
Other...

ADJUSTING VIEWING ANGLE
ATTENTION! Adjusting the viewing angle can only be done along the vertical axis, so
be sure to position the device correctly on the windshield along the horizontal axis as
close as possible to the windshield’s center.
While pulling or pushing the device in the holder, ensure that the camera captures the
image in proportions of 30% sky / 70% road.
GOOD BAD