Sylvania SDPF872 User manual

SDPF872

Table of Contents Introduction
Congratulations on yourpurchase of DigitalPhoto Frame, modelSDPF872.
Before operating theunit, please readthis manual thoroughly, and retainit for future
reference. This manualwill help youuse many ofthe exciting anduseful features that
will make yourDigital Photo Frameviewing more enjoyable.
This Digital PhotoFrame lets youview digital picturesdirectly from yourcamera's
memory cards. You will beable to createa slideshow usingmultiple transition effectsor
display one pictureat a time.No computer,digital camera orInternet connection is
required.
This Digital PhotoFrame is compatiblewith the followingpopular memory card
formats: USB, SD,MultiMediaCard, and MemoryStick.
Package Contents
Digital Photo Frame
ACAdaptor
User's Manual
Remote Control
Photo Frame Stand
Installing YourUnit
Locate the removableeasel and placein the correspondingholes at theback of theunit.
Plug in theAC adaptor into power outlet. Plug the other end into the unit.
After the contentis stored on the target flash device. Insert the device into the correct
slot.
Note: Please ensurethat you have one photo file loaded onto the memory card.
Turn on the unit by sliding ON/OFF switch to ON.
1
1
3
1
4
4
5
6
2
2
Main unit controls
System connection
7
7
photo
Remote control

23
1. DC in 5V 2. USB port
3. SD card slot 4. ON/OFF :turn on and turn off the unit
5. :Use this button to move cursor up and down when at setting menu; When playing JPEG files, press it
to play prev/next JPEG file; When the picture is enlarged, press it to move the picture up and down .
:Use this button to move cursor left and right when at setting menu; When playing JPEG files, press it
to counter-clockwise and clockwise rotate the picture; When the picture is enlarged, press it to move
the picture left and right .
6.OK:To confirm when selecting an option on the menu; When displaying pictures, press it to call setup
menu; When at time set mode, press this button to call setup menu and its submenu.
7.M: When automatic playing photo or in clock mode, press this button to return the main menu; When in
main menu, press this button to switch among device, folder and clock; U
nder "SETUP" mode, press
this button to back to previous.
Plug one end of the supplied AC/DC power adaptor into the DC input jack of the unit, then plug the
other end into the AC power receptacle. Please refer to the illustration above.
System Connection
Power connection
Upon using an SD card, insert it to the corresponding slot flatly with the label side facing you.
Using your SD card
Note: Please do not disconnect USB device or plug out SD/MMC/MS card while they are working with the
unit.Functional failure may occur in case of wrong operations.
Main Unit Controls
Remote Control
Button Description andFunction:
Mode:Switch between Photoslide show and Calendar + photo
Exit: Back to theupper menu,r to between eturn the main menuand switch device
and clock.
Zoom+: Zoom in thepicture
:Select an optionand play/pause
Func:Switch slide showeffect
Slide
Show
OK
Standby
Func Rotate Setup
Exit
Mode Zoom+ Zoom-
Standby:Switch the power
Rotate:Clockwise rotation
Setup:Press this keyto enter intosetup menu
OK:Select an optionand play
Zoom-: Zoom out thepicture
Slide Show:Start a slideshow
: Use this buttonto move cursorleft and right
when at settingmenu; When playingJPEG files,
press it tocounter-clockwise and clockwiserotate
the picture; Whenthe picture isenlarged, press itto move thepicture left andright .
: Use this buttonto move cursorup and down
when at settingmenu;When playing JPEGfiles,
press it toplay prev/next JPEGfile;
When the pictureis enlarged, pressit to
move the pictureup and down.
1
2
3
DC IN 5V
4
567
DC IN 5V
DC IN 5V

Using YourDigital Photo Frame through the remotecontrol
Make sure youhave at leastone image fileon your memorycards or USBflash drive.
Switch on theframe and insertmemory cards intothe unit, itwill automatically start
slideshow.
Press “ Exit”button on theremote control, itwill display themain menu.
Family
Scene
16:05
NOTE: Icons ofabove Media (USB,/SD/MMC/MS)shall appear
automatically on MENUscreen when certainmemory card isinserted. Icons shall
disappear when correspondingcard is removedfrom card slot.
Press “Exit” buttonrepeatedly to havethe cursor positionmove to
Folder-Device-Clock orderly.
When the cursorposition moving tothe Device, usethe directional arrows
to highlight thedesired flash device(USB,SD/MMC/ MS), press“ OK ”button or waitfor 3
seconds, cursor positionwill move tothe thumbnail imageof the firstfolder of the
corresponding device .
Browsing Images
Image Settings
While viewing anindividual image, press“ Setup” buttonon the remotecontrol, you will
then be givena list ofpossible features tochange:
OSD Language: Select the onscreen display language.
Slide Duration: Select the durationof time (5Seconds/10Seconds/1Minute/10 Minutes )
that each imageis shown ina slideshow.
Slide Order: Select the slideshoworder (Normal orRandom).
Slide Effect: Adjust the transitioneffect between eachimage in a slideshow. Optional
effect includes Off/Random/Slide/Door/Shutter/Mosaic/Cross Comb/Corner
Slide/Snail/Dissolving/Roll.
Display Mode: Select image displaysize (Original orFull screen).
Photo Play Mode:Select image playmode with Singleplay mode/ Slideshow mode/
Multi image mode/Multiround thumb/ Roundthumb/Free thumb/ Puzzle/Photo info on/off.
Photo Effect: Select display colorfor current imagewith Black& White/Sepia1/Sepia
2/ Sepia 3/Noeffect (original color).
Contrast: Debug screen contrast.
Brightness: Debug screen brightness.
Color: Debug screen saturation.
Reset: Revert to thefactory settings.
Version:Display the software version.
45
USB SD/MMC/MS
When the cursorposition moving tothe folder,use the directionalarrows
to highlight thedesired folder,press “ OK” button or wait for 3 seconds, cursor
position will moveto thumbnail formatpicture of thecorresponding folder .
When the cursorposition moving tothe image ,using thedirectional arrows
to highlight a image, press “OK”button to viewthe desired imageor
wait for 10seconds, system willgo into thecalendar + photomode.
thumbnail
thumbnail

Troubleshooting
Symptom Cause Corrective Actions
Digital Photo
Frame doesn't
power on
No photo files
on the memory
card
The file doesn't
play.
The power connector
to the unit is not
securely inserted.
Card is broken.
Incompatible file
format
Make sure you connectthe AC adaptorto the frame
properly.
Change for anew card.
Make sure thereis at least one supported
image file onthe memory card.
Compatible photo format: JPEG,BMP,GIF,
TIFF,PNG
Specifications
67
Type
Resolution
Output
Input
Working Temperature
Display Mode
File Format
Cards
USB Ports
8 inch DigitalPhoto Frame
800*600 Pixel
5V 1.0A
AC100-240V~50/60Hz
0-40
4:3
JPEG,BMP,GIF,TIFF,PNG
SD/MMC/MS
USB Slave
Weight
Dimension 260*220*40 mm
0.76 kg
Press" Exit" repeatedlyto highlight “Clock” icon ,press “ OK” button or
wait for 3seconds, it willenter into clock/calendarinterface.
Press “Setup” buttonon the remotecontrol, you willthen be given a list of possible
settings:
OSD Language: Select the on screen display language English / French / German/
Italian
Date& Time: Press “ O K ” and use the directional arrows to setDate
(YY-MM-DD), Time and Time mode(12 hours /24 hours).
Auto Power: Press “ OK” and usethe directional arrows to select Repeat
mode (Disable, OneDay , Weekday, Every Day, Weekend),and set time for power
on time, poweroff time.
Calendar Display: Select calendar display mode( With slide /With single/With clock).
Contrast: Debug screencontrast
Brightness: Debug screenbrightness
Color: Debug screensaturation
Clock / CalendarSettings
16:05