Introduction
To provide support and control for the body in
seated position within a wheelchair.
Free Form Seating is designed for the intended purpose of providing support to compensate
for loss of mobility due to an injury or handicap. require seating support
resulting from but not limited to, the following conditions: Cerebral Palsy, Paralysis, Arthritis,
Multiple Sclerosis or Motor Neurone Disease.
for Free Form Seating are limited to those individuals needing support and
control of the body in a seated position. The device is only to be used when attached to
another medical device i.e. a wheelchair. If a wheelchair is not present, the device should not
be used.
Any serious incident that has occurred in relation to this device should be reported to the
manufacturer and the competent authority of the Member State in which the user and/or
patient is established.
We want to hear your questions or comments about this manual and the safety and reliability
of your product. Please feel free to write, email or call us at the contact information below:
Symmetric Designs
125 Knott Pl
Salt Spring Island, BC V8K 2M4
Canada
sales@symmetric-designs.com
1 800 537 1724
1 250 537 2177
NOTICE:
This product manual for Symmetric Designs Free Form Seating is meant to be an informational and generic
resource so that a basic understanding of the product and its nite adjustment can be available for the user and
caregiver. This manual should always be referenced in conjunction with a licensed clinician for more advanced
tting and support techniques. Failure to consult a licensed clinician can result in muscular and skeletal issues
and/or injury to the user. The Symmetric Designs Free Form Seating and Mounting Hardware user manual
should be read and fully understood, prior to the installation, set-up, and use of this product.
2
