SyncAV SSAV-1X8HDMI User manual
1x8 HDMI SPLITTER
SSAV-1X8HDMI
User Manual
Disclaimer
The products, brand names and standards may be registered
trademark of their corresponding manufacturers/developers.
™ and ® may be omitted on the user manual.
Any pictures in the user manual are for reference only and may
differ from the physical products.
We reserve the rights to make changes without further notice
to a product or system described herein to improve reliability,
functionality or design.
FAQ
Q:No image output?
A: 1 ) Check the power supply of splitter, make sure the power
light is on.
2 ) Check if the HDMI cables are connected well.
3 ) Check and make sure the TV has been set up to the right
channel.
4 ) While connected with PC or notebook via HDMI, please
make sure the output mode is mirror or extend.
Q:Display is unstable, splash screen, snowflakes or audio
stuck?
A: 1 ) Check and make sure all connections are good and correct.
2 ) Try to directly connect HDMI source to display, if it is the
same, please change the source device.
3 ) Use high-quality HDMI cable for transmitting 4K×2K@60Hz
UHD signal.
Specification
Items Specifications
Input ports 1 x HDMI
Output ports 8 x HDMI
Power indicator LED 1 x LED
Signal indicator LED 8 x LED
HDMI Version Compatible with HDMI 1.4, HDMI 2.0
HDCP Version Compatible with HDCP 1.4, HDCP 2.2
HDMI Resolution 480i/480p/576i/576p/720p/1080i/1080p/
4K×2K@24/25/30/60Hz
Frequency Range 25MHz~600MHz
Video form Support 3D video and
4K×2K@30/60Hz ultra HD video
Input and output
TMDS signal
0.7~1.5Vp-p(TMDS)
Input and output DDC
signal
5Vp-p(TTL)
Audio Support standard audio and DSD (Direct Stream
Digital) and HD(HBR) audio
HDR Support
Working temperature 0ºC ~ 60ºC
Power supply DC12V/1A
Power consumption <8W
Dimension 262mm(L)x81.6mm(W)x23.5mm(H)
Weight 453g
Colour Black
Thank you for purchasing SyncAV™ SSAV-1x8HDMI. For best
results and your safety, please read the instructions and keep the
manual for future reference.
Important!
1. Use DC 12V power supply only. Make sure the specification
matched if using 3rd party DC adapters.
2. Put product in dry and ventilated place for normal heat
dissipation.
3. Keep product away from strong static and magnetic
environment.
Introduction
1x8 HDMI splitter distributes 1 HDMI source to 8 HDMI displays
simultaneously. Apply for STB, DVD, Media Player, Laptop, D-VHS
and other HD-Player devices. It’s compatible with HDMI 3D and
4Kx2K.
Features
1. Distribute 1 HDMI source to 8 HDMI displays
2. Support ultra HD resolution 4K×2K@60Hz
3. Support HDMI 3D
4. Support YUV 4:4:4
5. Support HDR
6. HDMI 2.0 and HDCP2.2 compliant
7. Low power consumption
8. Plug and play
9. Support configures the video resolution automatically
according to the capabilities of each connected monitor, allows
simultaneous mixed 4K and 1080P display outputs
What’s in the Box
Display 2
Display 1
Display 4
Display 3
Display 6
Display 5
Display 8
Display 7
DVD
Installation
1. Connection
1. Connect the HDMI video source output port to the splitter input
port by HDMI cable
2. Connect the splitter output port to HDMI display by HDMI cable
3. Set the TV input to right HDMI channel
4. Power on the splitter(Power indicator LED will light on)
2. Operation
1. Before output HDMI signal, the splitter will read EDID information
of connected TVs and send it back to HDMI source part to let it
determine the output mode
2. Indicator LED shows the working status
3. The splitter is build-in 16 kinds of EDID that can be selected by
4 switch codes, corresponding as following
Splitter Unit User Manual12V/1A
Power Adapter
HDMI Output
Ports
EDID Dial Switch Output LED Output LED
Power indicator
HDMI Intput
Ports
Power Input
（12V/1A）
HDMI Output
Ports
Installation Requirement
1. Source: HDMI video source, such as DVD, PS3, STB, PC, Etc.
2. Display: HDTV, projector or other display with HDMI port
3. Cable: High standard HDMI cable (can support 4Kx2K)
Interface Specification
Switch up for“1” Switch down for “0”
Switch
Status
1234 EDID information
00004k@60Hz 2CH
10004k@60Hz 7.1CH
01004k@30Hz 2CH
11004k@30Hz 7.1CH
00101080p@60Hz 2CH
10101080p@60Hz 7.1CH
01101080i@60Hz 2CH
11101080i@60Hz 7.1CH
00011080p@50Hz 2CH
10011080p@50Hz 7.1CH
01014K@30Hz HDR
11014K@60Hz HDR
0011Copy once
1011MIX1
0111MIX2
1111MIX3
[NOTE]
Copy Once: Read the EDID of the first connected output only
MIX1: Lowest format of audio, and lowest format of video
MIX2: Highest format of audio, and compose down scaling of video
MIX3: Lowest format of audio, and compose down scaling of video
Compose down scaling: Only HDMI 4K@60Hz (YCbCr4:4:4 or
YCbCr4:2:0) signal, would be downscale to 1080P@60Hz
Thank you for purchasing SyncAV™ SSAV-1x8HDMI. For best
results and your safety, please read the instructions and keep the
manual for future reference.
Important!
1. Use DC 12V power supply only. Make sure the specification
matched if using 3rd party DC adapters.
2. Put product in dry and ventilated place for normal heat
dissipation.
3. Keep product away from strong static and magnetic
environment.
Introduction
1x8 HDMI splitter distributes 1 HDMI source to 8 HDMI displays
simultaneously. Apply for STB, DVD, Media Player, Laptop, D-VHS
and other HD-Player devices. It’s compatible with HDMI 3D and
4Kx2K.
Features
1. Distribute 1 HDMI source to 8 HDMI displays
2. Support ultra HD resolution 4K×2K@60Hz
3. Support HDMI 3D
4. Support YUV 4:4:4
5. Support HDR
6. HDMI 2.0 and HDCP2.2 compliant
7. Low power consumption
8. Plug and play
9. Support configures the video resolution automatically
according to the capabilities of each connected monitor, allows
simultaneous mixed 4K and 1080P display outputs
What’s in the Box
Display 2
Display 1
Display 4
Display 3
Display 6
Display 5
Display 8
Display 7
DVD
Installation
1. Connection
1. Connect the HDMI video source output port to the splitter input
port by HDMI cable
2. Connect the splitter output port to HDMI display by HDMI cable
3. Set the TV input to right HDMI channel
4. Power on the splitter(Power indicator LED will light on)
2. Operation
1. Before output HDMI signal, the splitter will read EDID information
of connected TVs and send it back to HDMI source part to let it
determine the output mode
2. Indicator LED shows the working status
3. The splitter is build-in 16 kinds of EDID that can be selected by
4 switch codes, corresponding as following
Splitter Unit User Manual12V/1A
Power Adapter
HDMI Output
Ports
EDID Dial Switch Output LED Output LED
Power indicator
HDMI Intput
Ports
Power Input
（12V/1A）
HDMI Output
Ports
Installation Requirement
1. Source: HDMI video source, such as DVD, PS3, STB, PC, Etc.
2. Display: HDTV, projector or other display with HDMI port
3. Cable: High standard HDMI cable (can support 4Kx2K)
Interface Specification
Switch up for“1” Switch down for “0”
Switch
Status
1234 EDID information
00004k@60Hz 2CH
10004k@60Hz 7.1CH
01004k@30Hz 2CH
11004k@30Hz 7.1CH
00101080p@60Hz 2CH
10101080p@60Hz 7.1CH
01101080i@60Hz 2CH
11101080i@60Hz 7.1CH
00011080p@50Hz 2CH
10011080p@50Hz 7.1CH
01014K@30Hz HDR
11014K@60Hz HDR
0011Copy once
1011MIX1
0111MIX2
1111MIX3
[NOTE]
Copy Once: Read the EDID of the first connected output only
MIX1: Lowest format of audio, and lowest format of video
MIX2: Highest format of audio, and compose down scaling of video
MIX3: Lowest format of audio, and compose down scaling of video
Compose down scaling: Only HDMI 4K@60Hz (YCbCr4:4:4 or
YCbCr4:2:0) signal, would be downscale to 1080P@60Hz
Thank you for purchasing SyncAV™ SSAV-1x8HDMI. For best
results and your safety, please read the instructions and keep the
manual for future reference.
Important!
1. Use DC 12V power supply only. Make sure the specification
matched if using 3rd party DC adapters.
2. Put product in dry and ventilated place for normal heat
dissipation.
3. Keep product away from strong static and magnetic
environment.
Introduction
1x8 HDMI splitter distributes 1 HDMI source to 8 HDMI displays
simultaneously. Apply for STB, DVD, Media Player, Laptop, D-VHS
and other HD-Player devices. It’s compatible with HDMI 3D and
4Kx2K.
Features
1. Distribute 1 HDMI source to 8 HDMI displays
2. Support ultra HD resolution 4K×2K@60Hz
3. Support HDMI 3D
4. Support YUV 4:4:4
5. Support HDR
6. HDMI 2.0 and HDCP2.2 compliant
7. Low power consumption
8. Plug and play
9. Support configures the video resolution automatically
according to the capabilities of each connected monitor, allows
simultaneous mixed 4K and 1080P display outputs
What’s in the Box
Display 2
Display 1
Display 4
Display 3
Display 6
Display 5
Display 8
Display 7
DVD
Installation
1. Connection
1. Connect the HDMI video source output port to the splitter input
port by HDMI cable
2. Connect the splitter output port to HDMI display by HDMI cable
3. Set the TV input to right HDMI channel
4. Power on the splitter(Power indicator LED will light on)
2. Operation
1. Before output HDMI signal, the splitter will read EDID information
of connected TVs and send it back to HDMI source part to let it
determine the output mode
2. Indicator LED shows the working status
3. The splitter is build-in 16 kinds of EDID that can be selected by
4 switch codes, corresponding as following
Splitter Unit User Manual12V/1A
Power Adapter
HDMI Output
Ports
EDID Dial Switch Output LED Output LED
Power indicator
HDMI Intput
Ports
Power Input
（12V/1A）
HDMI Output
Ports
Installation Requirement
1. Source: HDMI video source, such as DVD, PS3, STB, PC, Etc.
2. Display: HDTV, projector or other display with HDMI port
3. Cable: High standard HDMI cable (can support 4Kx2K)
Interface Specification
Switch up for“1” Switch down for “0”
Switch
Status
1234 EDID information
00004k@60Hz 2CH
10004k@60Hz 7.1CH
01004k@30Hz 2CH
11004k@30Hz 7.1CH
00101080p@60Hz 2CH
10101080p@60Hz 7.1CH
01101080i@60Hz 2CH
11101080i@60Hz 7.1CH
00011080p@50Hz 2CH
10011080p@50Hz 7.1CH
01014K@30Hz HDR
11014K@60Hz HDR
0011Copy once
1011MIX1
0111MIX2
1111MIX3
[NOTE]
Copy Once: Read the EDID of the first connected output only
MIX1: Lowest format of audio, and lowest format of video
MIX2: Highest format of audio, and compose down scaling of video
MIX3: Lowest format of audio, and compose down scaling of video
Compose down scaling: Only HDMI 4K@60Hz (YCbCr4:4:4 or
YCbCr4:2:0) signal, would be downscale to 1080P@60Hz
Thank you for purchasing SyncAV™ SSAV-1x8HDMI. For best
results and your safety, please read the instructions and keep the
manual for future reference.
Important!
1. Use DC 12V power supply only. Make sure the specification
matched if using 3rd party DC adapters.
2. Put product in dry and ventilated place for normal heat
dissipation.
3. Keep product away from strong static and magnetic
environment.
Introduction
1x8 HDMI splitter distributes 1 HDMI source to 8 HDMI displays
simultaneously. Apply for STB, DVD, Media Player, Laptop, D-VHS
and other HD-Player devices. It’s compatible with HDMI 3D and
4Kx2K.
Features
1. Distribute 1 HDMI source to 8 HDMI displays
2. Support ultra HD resolution 4K×2K@60Hz
3. Support HDMI 3D
4. Support YUV 4:4:4
5. Support HDR
6. HDMI 2.0 and HDCP2.2 compliant
7. Low power consumption
8. Plug and play
9. Support configures the video resolution automatically
according to the capabilities of each connected monitor, allows
simultaneous mixed 4K and 1080P display outputs
What’s in the Box
Display 2
Display 1
Display 4
Display 3
Display 6
Display 5
Display 8
Display 7
DVD
Installation
1. Connection
1. Connect the HDMI video source output port to the splitter input
port by HDMI cable
2. Connect the splitter output port to HDMI display by HDMI cable
3. Set the TV input to right HDMI channel
4. Power on the splitter(Power indicator LED will light on)
2. Operation
1. Before output HDMI signal, the splitter will read EDID information
of connected TVs and send it back to HDMI source part to let it
determine the output mode
2. Indicator LED shows the working status
3. The splitter is build-in 16 kinds of EDID that can be selected by
4 switch codes, corresponding as following
Splitter Unit User Manual12V/1A
Power Adapter
HDMI Output
Ports
EDID Dial Switch Output LED Output LED
Power indicator
HDMI Intput
Ports
Power Input
（12V/1A）
HDMI Output
Ports
Installation Requirement
1. Source: HDMI video source, such as DVD, PS3, STB, PC, Etc.
2. Display: HDTV, projector or other display with HDMI port
3. Cable: High standard HDMI cable (can support 4Kx2K)
Interface Specification
Switch up for“1” Switch down for “0”
Switch
Status
1234 EDID information
00004k@60Hz 2CH
10004k@60Hz 7.1CH
01004k@30Hz 2CH
11004k@30Hz 7.1CH
00101080p@60Hz 2CH
10101080p@60Hz 7.1CH
01101080i@60Hz 2CH
11101080i@60Hz 7.1CH
00011080p@50Hz 2CH
10011080p@50Hz 7.1CH
01014K@30Hz HDR
11014K@60Hz HDR
0011Copy once
1011MIX1
0111MIX2
1111MIX3
[NOTE]
Copy Once: Read the EDID of the first connected output only
MIX1: Lowest format of audio, and lowest format of video
MIX2: Highest format of audio, and compose down scaling of video
MIX3: Lowest format of audio, and compose down scaling of video
Compose down scaling: Only HDMI 4K@60Hz (YCbCr4:4:4 or
YCbCr4:2:0) signal, would be downscale to 1080P@60Hz
1x8 HDMI SPLITTER
SSAV-1X8HDMI
User Manual
Disclaimer
The products, brand names and standards may be registered
trademark of their corresponding manufacturers/developers.
™ and ® may be omitted on the user manual.
Any pictures in the user manual are for reference only and may
differ from the physical products.
We reserve the rights to make changes without further notice
to a product or system described herein to improve reliability,
functionality or design.
FAQ
Q:No image output?
A: 1 ) Check the power supply of splitter, make sure the power
light is on.
2 ) Check if the HDMI cables are connected well.
3 ) Check and make sure the TV has been set up to the right
channel.
4 ) While connected with PC or notebook via HDMI, please
make sure the output mode is mirror or extend.
Q:Display is unstable, splash screen, snowflakes or audio
stuck?
A: 1 ) Check and make sure all connections are good and correct.
2 ) Try to directly connect HDMI source to display, if it is the
same, please change the source device.
3 ) Use high-quality HDMI cable for transmitting 4K×2K@60Hz
UHD signal.
Specification
Items Specifications
Input ports 1 x HDMI
Output ports 8 x HDMI
Power indicator LED 1 x LED
Signal indicator LED 8 x LED
HDMI Version Compatible with HDMI 1.4, HDMI 2.0
HDCP Version Compatible with HDCP 1.4, HDCP 2.2
HDMI Resolution 480i/480p/576i/576p/720p/1080i/1080p/
4K×2K@24/25/30/60Hz
Frequency Range 25MHz~600MHz
Video form Support 3D video and
4K×2K@30/60Hz ultra HD video
Input and output
TMDS signal
0.7~1.5Vp-p(TMDS)
Input and output DDC
signal
5Vp-p(TTL)
Audio Support standard audio and DSD (Direct Stream
Digital) and HD(HBR) audio
HDR Support
Working temperature 0ºC ~ 60ºC
Power supply DC12V/1A
Power consumption <8W
Dimension 262mm(L)x81.6mm(W)x23.5mm(H)
Weight 453g
Colour Black
1x8 HDMI SPLITTER
SSAV-1X8HDMI
User Manual
Disclaimer
The products, brand names and standards may be registered
trademark of their corresponding manufacturers/developers.
™ and ® may be omitted on the user manual.
Any pictures in the user manual are for reference only and may
differ from the physical products.
We reserve the rights to make changes without further notice
to a product or system described herein to improve reliability,
functionality or design.
FAQ
Q:No image output?
A: 1 ) Check the power supply of splitter, make sure the power
light is on.
2 ) Check if the HDMI cables are connected well.
3 ) Check and make sure the TV has been set up to the right
channel.
4 ) While connected with PC or notebook via HDMI, please
make sure the output mode is mirror or extend.
Q:Display is unstable, splash screen, snowflakes or audio
stuck?
A: 1 ) Check and make sure all connections are good and correct.
2 ) Try to directly connect HDMI source to display, if it is the
same, please change the source device.
3 ) Use high-quality HDMI cable for transmitting 4K×2K@60Hz
UHD signal.
Specification
Items Specifications
Input ports 1 x HDMI
Output ports 8 x HDMI
Power indicator LED 1 x LED
Signal indicator LED 8 x LED
HDMI Version Compatible with HDMI 1.4, HDMI 2.0
HDCP Version Compatible with HDCP 1.4, HDCP 2.2
HDMI Resolution 480i/480p/576i/576p/720p/1080i/1080p/
4K×2K@24/25/30/60Hz
Frequency Range 25MHz~600MHz
Video form Support 3D video and
4K×2K@30/60Hz ultra HD video
Input and output
TMDS signal
0.7~1.5Vp-p(TMDS)
Input and output DDC
signal
5Vp-p(TTL)
Audio Support standard audio and DSD (Direct Stream
Digital) and HD(HBR) audio
HDR Support
Working temperature 0ºC ~ 60ºC
Power supply DC12V/1A
Power consumption <8W
Dimension 262mm(L)x81.6mm(W)x23.5mm(H)
Weight 453g
Colour Black
1x8 HDMI SPLITTER
SSAV-1X8HDMI
User Manual
Disclaimer
The products, brand names and standards may be registered
trademark of their corresponding manufacturers/developers.
™ and ® may be omitted on the user manual.
Any pictures in the user manual are for reference only and may
differ from the physical products.
We reserve the rights to make changes without further notice
to a product or system described herein to improve reliability,
functionality or design.
FAQ
Q:No image output?
A: 1 ) Check the power supply of splitter, make sure the power
light is on.
2 ) Check if the HDMI cables are connected well.
3 ) Check and make sure the TV has been set up to the right
channel.
4 ) While connected with PC or notebook via HDMI, please
make sure the output mode is mirror or extend.
Q:Display is unstable, splash screen, snowflakes or audio
stuck?
A: 1 ) Check and make sure all connections are good and correct.
2 ) Try to directly connect HDMI source to display, if it is the
same, please change the source device.
3 ) Use high-quality HDMI cable for transmitting 4K×2K@60Hz
UHD signal.
Specification
Items Specifications
Input ports 1 x HDMI
Output ports 8 x HDMI
Power indicator LED 1 x LED
Signal indicator LED 8 x LED
HDMI Version Compatible with HDMI 1.4, HDMI 2.0
HDCP Version Compatible with HDCP 1.4, HDCP 2.2
HDMI Resolution 480i/480p/576i/576p/720p/1080i/1080p/
4K×2K@24/25/30/60Hz
Frequency Range 25MHz~600MHz
Video form Support 3D video and
4K×2K@30/60Hz ultra HD video
Input and output
TMDS signal
0.7~1.5Vp-p(TMDS)
Input and output DDC
signal
5Vp-p(TTL)
Audio Support standard audio and DSD (Direct Stream
Digital) and HD(HBR) audio
HDR Support
Working temperature 0ºC ~ 60ºC
Power supply DC12V/1A
Power consumption <8W
Dimension 262mm(L)x81.6mm(W)x23.5mm(H)
Weight 453g
Colour Black
Table of contents
