Syncronorm V:Nano 512 User manual

V:Nano
User Manual & Terms of Use
www.syncronorm.com [e-mail]#liquidinspiration

[phone]
[phone]
www.syncronorm.com
[email protected]
Syncronorm GmbH
Graf-Gottfried-Strasse 122
59755 Arnsberg | Germany
ABOUT US
Syncronorm GmbH are highly motivated producers of high-end multimedia show design software,
which features a most unique real-time 3D visualizer. Our dynamic & experienced team thereby
operates on a world-wide scale, providing you with the best software & hardware solutions tting
to your dedicated project. From show-design, training-programs, instant support & consulting
to continuously soft- & hardware development, the team at Syncronorm is eager to realize your
visions. Syncronorm provide the most established & renowned products for the entertainment- &
water-show sectors within the industry and beyond.

Version: February 2022
V:NANO
Made even for the roughest environments, the V:Nano represents Syncronorm’s smart solution for
smaller & more intimate fountain show installations. The V:Nano 512 or 1024 “music” show
controller is a DIN-rail fan-less & ruggedized embedded system with a highly ecient low power
CPU chipset. The V:Nano can withstands wider temperature ranges while featuring DMX 512/1990
ports, an isolated Ethernet port with 10/100 Mbit, a micro SD card slot and a IPS display. A perfect
match for smaller stand-alone fountains as well as musical fountain installations, both feature 8x
digital I/O’s. The V:Nano is fully compatible with our fountain control system Depence. Easily
enhance your workow by uploading shows via SD card or your local network.
Standalone Showplayer

1. WELCOME TO SYNCRONORM
Preface
Checking the Scope of Delivery
Intended Use
2. SAFETY INSTRUCTIONS
Safety Information
Dangers resulting from non-adherence to the Safety Information
Safety-conscious Operation
Safety Information regarding Maintenance, Inspection and Installation Work
Optional retrotting and Production of Spare Parts
Dangers encountered by the Combination of Water and Electricity
Assembly
3. OVERVIEW
Front
Dimensions
Technical Data
4. INSTALLATION
Installation on Cap Rail
Disassembly
Wall Mounting
5. ELECTRICAL CONNECTION
Voltage Supply
6. DIGITAL INPUTS
Features
Connecting the Anemometer
7. DIGITAL OUTPUTS
Features
DMX Connection
Audio Output
USB Connection
Ethernet Connection
Node Link
TABLE OF CONTENTS
S.06
S.07
S.08
S.09
S.10
S.11
S.12
S.13
S.14
S.15
S.16

8. SWITCHING ON
Switching on the Voltage Supply
9. OPERATION
Operating and Display Elements
Status Displays
Menu Structure
Description of Menus
Home
Main
Scheduler
Show Player
RDM
DMX
More...
I/O Ports
Output State
Anemometer
Master
Settings
Nodes
Notication
10. MAINTENANCE
Maintenance & Cleaning
Changing the Battery
Malfunction Remedy
11. DISPOSAL
Protecting the Environment
Disposal
12. GUARANTEE
Guarantee Conditions
TABLE OF CONTENTS
S.17
S.18
S.19
S.20
S.21
S.22
S.23
S.25
S.26
S.27
S.28
S.32
S.33
S.34
S.35
S.36
S,37

(C) 2022 Syncronorm GmbH
6
You made a great choice by purchasing Syncronorm‘s V:Nano hardware unit. Prior to commissioning
the unit, please read the following instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance to these instructions. Adhere
to the safety information for the correct and safe use of the unit. Keep these instructions in a safe place!
Please also hand over the instructions, when passing the unit on to a new owner.
Preface
This document is a guideline for controlling the hardware of Syncronorm‘s show design & control
software Depence. The information contained in this manual will give you a sucient understanding of
this product, helping you to use the unit correctly and eectively. Adhere to all instructions contained
in this manual, when installing and operating this unit. Every person working with this equipment must
read this manual before installation and commissioning of the equipment/device. Every person working
with this device/equipment must read the manual before starting to work. Even personnel working with
this device only occasionally must read and understand this manual before beginning to work. This
manual must always be available at the site, where the device is located. Every user of this device must
be aware of the location of the manual.
Checking the Scope of Delivery
Please check that the scope of delivery is complete. Keep the packaging for later transport. If
components are damaged or missing, contact your Syncronorm supplier. To download the current
software and rmware, visit the Syncronorm website at www.syncronorm.com.
Intended Use
The V:Nano Controller is a standalone entertainment controller for fountains and light control.
The V:Nano, in the following referred to as „unit“, may only be used as specied as follows:
• For controlling DMX and DMX-RDM compatible devices.
• For playback of multimedia shows created with Depence.
WELCOME TO SYNCRONORM

(C) 2022 Syncronorm GmbH 7
Safety Information
• READ ALL INSTRUCTIONS BEFORE USING (THIS UNIT).
• SAVE THESE INSTRUCTIONS.
• Special regulations apply for electrical installation in outdoor spaces. Only a qualied electrician
may perform the electrical installation.
– The qualied electrician has the necessary professional training, knowledge and experience
to perform electrical installation in outdoor spaces. The electrician can detect potential
dangers and knows how to adhere to regional and national standards, regulations and directives.
– For your own safety, please consult a qualied electrician.
• Only connect the unit if the electrical data of the unit and the power supply match.
• Do not use the unit as a toy. Close attention is necessary when the product is used by or near
children.
• Do not use the unit, if electrical lines or the housing are damaged.
• Never carry out technical changes to the unit.
• Only carry out work on the unit that is described in this manual.
• Always unplug the unit before working on it.
• Protect disconnected plug connectors from moisture.
• Only use original spare parts and accessories.
• Should problems occur, please contact the authorised customer service or Syncronorm GmbH.
Dangers resulting from non-adherence to the Safety Information
Please note that Syncronorm GmbH assumes no liability for damage, downtimes or malfunctions
resulting from non-adherence to this installation and operating manual. By ignoring or not adhering to
all of the safety information contained in this manual, you could endanger people, the environment and
the system of this unit. For example, non-adherence to the safety information contained in this manual
can lead to the following dangerous occurrences:
• A malfunction of important features of this unit
• Danger for persons due to electric shock
Safety-conscious Operation
As a user of this unit, ensure that you follow all safety information contained in this manual. Follow the
accident prevention regulations at all times. If the unit is used in a location where internal regulations,
operating and safety instructions apply, ensure that these regulations and instructions are also adhered
to.
SAFETY INSTRUCTIONS

(C) 2022 Syncronorm GmbH
8
Safety Information regarding Maintenance, Inspection and Installation Work
It is the owner/user‘s responsibility to ensure that all maintenance, inspection and installation work is
carried out by authorized and qualied personnel, who have read and understood this manual.
Only carry out maintenance work on this unit, when the unit system is switched o. Ensure that no
pressure is applied to the unit and it is disconnected from the power supply (voltage-free) before
carrying out maintenance or repair work.
Ensure that small malfunctions are immediately rectied by authorized personnel to avoid possible future
damage, malfunctions and/or downtimes of the unit system. Certain maintenance work may require
safety barriers to be removed and/or deactivated. If this is the case, ensure that all safety and protective
devices/guards are re-installed and/or reactivated after completing the maintenance work.
Optional retrotting and Production of Spare Parts
Changes or modications to the device are only permitted after consultation with the manufacturer.
Original spare parts and accessories approved by the manufacturer provide safety. We wish to stress that
all parts and accessories not supplied by Syncronorm GmbH have neither been tested nor approved
by Syncronorm GmbH. For this reason, the installation and/or use of such products can, under certain
circumstances, negatively aect the specications for the device. This could also lead to restrictions of the
active and/or passive safety of the device. Syncronorm GmbH assumes no liability for damage resulting
from the use of parts and accessories other than original Syncronorm GmbH parts.
In this case all guarantee expires.
Dangers encountered by the Combination of Water and Electricity
• The combination of water and electricity can lead to death or severe injuries from electrocution, if the
unit is incorrectly connected or misused.
• Prior to reaching into the water, always switch o the mains voltage to all units used in the water.
Assembly
Fastening variants:
• Installation on cap rail 35 mm × 7.5 mm (according to EN 50022).
• Wall mounting with screws.
Ambient conditions:
• Dry, dust-free, no direct sunlight.
SAFETY INSTRUCTIONS

(C) 2022 Syncronorm GmbH 9
Front
Dimensions
OVERVIEW
158 mm
24V DC DMX-OUT 8x DIGITAL INPUT
8x DIGITAL OUTSD-SLOTAUDIOUSB
ETHERNET
58 mm90 mm
94 mm

(C) 2022 Syncronorm GmbH
10
Technical Data
Dimensions
Weight
Protection Class
Operation Temperature
Power Supply
Certication
DMX Output
Digital Output
Digital Input
Memory
Display
Synchronization
Scope of delivery
V:Nano 512 | V:Nano 1024 Music
158x94x58mm
0.33kg
IP20
0...40° / 0...80% humidity
24V DC / 0.42 A / 10W
CE
512 Channel DMX-RDM | 1024 Channel DMX-RDM
8x Digital Output (24V DC, max 1A)
4x DMX-RDM 512ch | 4x DMX-RDM 1024ch
- | Audio (AUX/3-pin)
8x Digital Input (max 30V DC)*
micro SD Card (FAT32 max 32GB)
240x320px IPS
1x USB 2.0
1x Node Link RJ45 (10/100 MBit)
1x Ethernet RJ45 (10/100 MBit)
V:Nano unit, Documentation
*One Digital-Input can be used to connect an optional available digital Anemometer.
OVERVIEW