Synergy 21 157400 User manual

Model no. 157400
LED spot
User Manual
LED Ceiling recessed spotlight
re V2 ww+nw+cw
Model no. 157400

Model no. 157400
LED spot
Installation procedure
1. Prepare the hole according to cut out size Given (65 - 70mm).
2. Remove the cover on the quick connection and connect the mains cable as marked (L E N).
3. Put back the cover and secure it using the screws provided.
4. Hold both springs upwards against the heat sink and push the light fi tting through the hole. Release the springs
slowly, springs will hold the light fi tting in the ceiling.
5. Switch on the supply to complete the installation.

Model no. 157400
LED spot
Hygiene & safety
Caution
We advise to use the sft cloth to clean up and do not attempt to use any chemical agent in order to avoid any dama-
ges from the surface. For your safety, please cut off the supply before changing or cleaning the lamp source.
• Installation must be done by professional electrician or competent person.
• Before commence the installation please make sure you have correct voltage present as stated.
• Please carry out safety isolation procedure before commencing the installation.
• Please make sure correct size of circuit protection device (fuse/circuit breaker) installed according to number of light
fi ttings in the circuit.
• The defective light fi tting / driver should not be treated as the normal waste and should be returned to supplier or
disposed appropriately according to local authority guidelines.