Synology DiskStation DS213j User manual

Synology DiskStation DS213j
Quick Installation Guide
Synology_QIG_2B
ay_20130218

2
Table of Contents
Chapter 1: Before You Start
Package Contents .............................................................................................................................................................. 3
Synology DiskStation at a Glance.................................................................................................................................... 4
Safety Instructions .............................................................................................................................................................. 5
Chapter 2: Hardware Setup
Tools and Parts for Hard Disk Installation....................................................................................................................... 6
Install Hard Disks................................................................................................................................................................ 6
Start up your DiskStation................................................................................................................................................... 8
Chapter 3: Install DiskStation Manager
Install DSM with Web Assistant........................................................................................................................................ 9
Install DSM with Synology Assistant.............................................................................................................................. 10
For Windows...................................................................................................................................................................... 10
For Mac OS X.................................................................................................................................................................... 12
For Linux ............................................................................................................................................................................ 12
Learn More ........................................................................................................................................................................ 14
Appendix A: Specifications
Appendix B: LED Indication Table

3
Chapter
1
Chapter 1: Before You Start
Before you start setting up DiskStation, please check the package contents to verify that you have received the
items below. Please also read the safety instructions carefully before use to prevent your DiskStation from any
damages.
Package Contents
Main Unit x 1 AC power cord x 1
AC power adapter x 1
RJ-45 LAN cable x 1
Screws for hard drives x 10 Screws for fixing the Synology case x 3 Installation disc x 1

4 Chapter 1: Before You Start
Synology DiskStation at a Glance
No. Name Location Description
1) LED Indicators Front Panel
The LED indicator is used to display the status of the internal disks and the
system. For more information, see "Appendix B: LED Indication Table" on Page
16.
2) Power Button Front Panel
The power button is used to turn Synology DiskStation on or off.
To turn off Synology DiskStation, press the power button and hold it until you
hear a beep sound and the Power LED starts blinking.
3) Fan Back Panel The fan is built to exhaust waste heat out of Synology DiskStation. If the fan is
malfunctioning, the system will beep every 2~4 seconds.
4) USB Ports Back Panel The Synology DiskStation offers USB ports for adding additional external hard
drives, USB printers, or other USB devices.
5) RESET Button Back Panel 1.To restore IP, DNS, passwords for the admin account to default value.
2.To reinstall the Synology DiskStation.
6) LAN Port Back Panel The LAN port is where you connect RJ-45 cable to Synology DiskStation.
7) Power Port Back Panel The power port is where you connect the AC power adapter to
Synology DiskStation.

5 Chapter 1: Before You Start
Safety Instructions
Keep away from direct sunlight and away from chemicals. Make sure the environment does not
experience abrupt changes in temperature or humidity.
Do not place the Synology product close to any liquid.
Before cleaning, unplug the power cord first. Wipe Synology product with damp paper towels. Do
not use chemical or aerosol cleaners to clean it.
Do not place the Synology product on a cart, table, or desk, which is not stable to avoid the
product from falling over.
The power cord must plug in to the right supply voltage. Make sure that the supplied AC voltage
is correct and stable.
To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.
Risk of explosion if battery
is replaced with an incorrect type. Dispose of used batteries
appropriately.

6
Chapter
2
Chapter 2: Hardware Setup
Tools and Parts for Hard Disk Installation
A screwdriver
At least one 3.5” or 2.5” SATA hard disk
(Please visit www.synology.com for compatible hard disk models.)
Warning: If you install a hard disk that contains data, the system will format the hard disk and erase all data. If you
need the data in the future, please back it up before installation.
Install Hard Disks
1 Push the upper case in the direction as shown below. Lift the upper case and set it aside.
2 Install the hard disk:
For 3.5" Hard Disk: Slide the hard disk into the hard drive bay, and push it all the way until it is connected
to the SATA connector. Secure the hard disk with the provided screws.
For 2.5" Hard Disk:
a Place the hard disk in the 2.5" Disk Holder (Type C, sold separately), and then tighten the 2.5" screws to
secure the hard disk.

7 Chapter 2: Hardware Setup
b Slide the 2.5" Disk Holder into the hard drive bay, and push it all the way until the hard disk is connected
to the SATA connector. Secure the Disk Holder with the provided screws.
3 Repeat the steps above to assemble the other hard disk you have prepared.
4 The disks' positions are numbered as shown below.
Note: If you want to set up a RAID array, it is recommended that all installed hard disks are of the same size to
make the best use of hard disk capacity.
5 Replace the upper case, and tighten the screws on the back panel.

8 Chapter 2: Hardware Setup
Start up your DiskStation
1 Connect the AC adapter to the power port of DiskStation. Connect one end of the AC power cord to the AC
power adapter, and the other to the power outlet.
2 Use the LAN cable to connect DiskStation to your switch/router/hub.
3 Press and hold the power button to turn on your DiskStation.
Your DiskStation is now online and detectable from a network computer.

9
Chapter
3
Chapter 3: Install DiskStation Manager
Synology DiskStation Manager (DSM) is a browser-based operating system which provides tools to access and
manage your Synology DiskStation. To get started, please choose one of the following installation methods:
Web Assistant is a browser-based installation tool which helps you easily download and install the newest
version of DSM. For best performance, we recommend installing with Web Assistant.
Synology Assistant is a desktop application which helps you install DSM. With Synology Assistant, you can
install DSM from the installation disc that came with your Synology DiskStation or from the download center at
www.synology.com.
Install DSM with Web Assistant
Your Synology DiskStation comes equipped with Web Assistant, a browser-based installation tool which helps
you download, configure, and install the newest version of Synology DiskStation Manager (DSM). Before
installing DSM with Web Assistant, please check the following:
Your computer and Synology DiskStation must be connected to the same local network.
In order to download the latest version of DSM, Internet access must be available during installation.
After confirming, please follow the steps below:
1 Power on your Synology DiskStation.
2 Open a web browser on your computer and go to find.synology.com.
Note: Web Assistant is optimized for Chrome and Firefox web browsers.
3 Web Assistant will find your Synology DiskStation within the local network. The status of your DiskStation
should be Not Installed.
4 Click Connect to begin the setup process. Follow the onscreen instructions to complete the setup process.

10 Chapter 3: Install DiskStation Manager
Install DSM with Synology Assistant
If your internet connection is unavailable or you are experiencing difficulties with Web Assistant, you can also
install DSM with Synology Assistant. Please follow the instructions below for your individual operating system.
For Windows
1 Find the DSM installation disc which came with your Synology DiskStation. Insert the disc into your computer.
Click Start. Follow the installation wizard instructions.
2 After being installed and launched on your computer, Synology Assistant will search within the local network
for your Synology DiskStation. The status of your DiskStation should be Not Installed. Select your DiskStation
from the list and click Connect to start the setup process.
Not Installed
4.2-3200 DS213j A5GA