syozen Z2 User manual

M1
M3M4
RT
R
M2
L
LT
Manual
(for firmware v2.0+)
Home
Turbo
Keymap
Motion Assist
M1 M2
M3 M4
RT Shift LT Shift
Components
2.4G Receiver
(sold separately)
Z2/Z2S
Switch Xbox
East
South
West
North
A
AB
B
Y
Y
X
X
ABXY Layout
Version

SWITCH
Bluetooth Connection
Wired Connection
➀Set Wired Communication to On.
➁ Connect the controller to the dock with USB cable
➀Turn on Switch, select “Controller”, “Change Grip/Order”.
➁Hold the south button and Home button for 2 seconds (the light turns from red to white).
Release and wait.
➂Once succeed, the light stays red.
+
Pair
General Link: Press Home button (if this console is the one been Bluetooth connected last
time). In case Switch in sleep, it will be waked up automatically.
Link by Mode: Press the south button + Home button (if this console is the one been
Bluetooth connected by Switch mode last time). In case Switch in sleep, it will be waked up
automatically.
Link / Wakeup

Information:
• Xbox mode and Switch mode also applies to Android devices.
• Linux includes Raspberry Pi, Chrome OS and other Linux-based devices.
ANDROID LINUX
Gamepad Mode
➀Enable Bluetooth, select to pair new device.
➁Hold the east button and Home button for 2 seconds (the light turns from green to white).
➂Find the device “Gamepad” to pair.
➃Once succeed, the light stays green.
+
Pair
Link
General Link: Press Home button (if this device is the one been Bluetooth connected last
time).
Link by Mode: Press the east button + Home button (if this device is the one been Bluetooth
connected by Android mode last time).
Virtual Touch Mode
This mode is used to play Android games which don’t support controller, by virtual
buttons on the screen to simulate touch input.
➀Enable Bluetooth, select to pair new device.
➁Hold the west button and Home button for 2 seconds (the light turns from yellow to
white).
➂Find the device “Gamepad_Touch” to pair.
➃Once succeed, the light stays yellow.
➄ Open the app “Keylinker” to use.
+
Pair
Link
General Link: Press Home button (if this device is the one been Bluetooth connected last
time).
Link by Mode: Press the west button + Home button (if this device is the one been
Bluetooth connected by Virtual Touch mode last time).

Bluetooth Connection
➀Turn on Blueooth, select to add a device.
➁Hold the north button and Home button for 2 seconds (the light turns from blue to white).
➂Pair the device “Xbox Wireless Controller”.
➃Once succeed, the light stays blue.
WINDOWS APPLE DEVICES
Information:
Switch mode also applies, by which motion control is enabled in Steam.
+
Pair
• Connect via USB. Recognized as “ Xbox 360 Controller for Windows”.
• Connect via USB while holding Capture Button. Recognized as Switch Pro Controller.
Wired Connection
Link
General Link: Press Home button, if this device is the one been Bluetooth connected last
time.
Link by Mode: Press the north button + Home button, if this device is the one been
Bluetooth connected by Xbox mode last time. Or, press the south button + Home in case of
Switch mode.
+
2.4G Connection
➀Hold the south button and Home button for 2 seconds (the light turns from red to white).
➁Plug the receiver into the USB port.
➂Once succeed, the light stays red. Works as Xbox 360 controller by default.
Pair
Hold “+”and “-”button for 3 seconds, so to select the next mode by the sequence: Xbox 360
(default) -> Switch -> Android.
+
Select Mode
Same as Switch Link/Wakeup.
In case the receiver was replugged, the controller will be linked by the default mode, please
select again if you need.
Link

Pair only at the first time sync with the device. Thereafter, just link.
Only the latest paired device info of each mode (Switch, Xbox and Android mode) be saved.
If ever paired with another device at the same mode thereafter, pair again.
Pairing lasts 30 seconds, then shut off if not succeed.
Linking lasts 10 seconds, then shut off if not succeed.
GENERAL
Pair & Link
Auto sleep in 5 minutes of idle time.
Auto sleep when disconnected.
Press Home button for 5 seconds to reset and force sleep.
Sleep & Reset
When battery is low, the light turns breathing.
Charge via USB-C cable on DC power supplies (output Voltage 5V).
The light stays lit once full charged.
Support playing during charging.
Battery & Charge
RT/LT each has independent two-position slide switch to shift its travel.
Slide towards the inside for the full travel, towards the outside for the short.
Free to shift during gameplay.
RT/LT Shift
Layout Swap
Adaptive Swap
Change to Xbox layout automatically in Xbox/Android mode.
Quick Swap
Press Home button while holding the east button, so to manually exchange between Nintendo
and Xbox layout.
+
A
B
Y
X
B
A
X
Y

Information
• Keys support turbo function include A/B/X/Y/L/R/LT/RT/DPAD.
• Setting in Keylinker App (download in app markets) is an option.
Turbo
ADVANCED
Setting
➀Press Turbo button together with the chosen button to enable Turbo.
Please repeat the same operation to set for more buttons.
Once done, LED turns on. Press the button to activate (keep being hit
at the set speed), and release to stop.
➁Press Turbo button, together with the chosen button turbo enabled
at step 1, to enable Auto Turbo.
Please repeat the same operation to set for more buttons.
Once done, LED blinks, the button keeps being hit at the set speed
automatically. Press to pause, press again to resume.
➂Press Turbo button, together with the chosen button auto turbo
enabled at step 2, to turn off turbo function.
Please repeat the same operation to set for more buttons.
Turbo +
Auto Turbo
+
Off +
Clear Setting
Hold Turbo button for 5 seconds to clear all settings at once.
Once the controller is shut off, all settings will be cleared automatically.
Speed
Preset speed: 5 hits/s, 12 hits/s, 20 hits/s (default).
Hold Turbo button, move the right thumbstick up or down,
to shift the speed.
+

ADVANCED
Keymap
Information
• Only M1-4 buttons can be assigned mapping to other buttons.
• The existing Mapping will be replaced by the new setting on the same button.
• Set or edit in Keylinker app is an option.
➀Press Keymap button for 2 seconds, till the left light blinks red.
➁Press any of M1-4 buttons chosen to assign mapping. Once succeed, the left light stays
blue, the right light starts blinking red.
➂Press any button or buttons chosen to be mapped (sequence, time and interval will also
be recorded in case of buttons).
➃Press Keymap button again to end and save. Once succeed, the both lights stay blue.
Repeat steps 1-4 to establish new mappings.
Mapping
General Operation
Press to activate. If mapping exists in any of M1-4 buttons, both lights stay blue, the button
functions the same as the mapped one.
Press again to disable.
➀Press Keymap button for 2 seconds, till the left light blinks red.
➁Press any of M1-4 buttons chosen to unmap. Once done, the left light stays blue, the right
light starts blinking red.
➂Press Keymap button again to finish. In case there’s any other mapping relationship exists,
the both lights stay blue, otherwise the both lights turn red. Now the mapping to the button is
removed.
Repeat steps 1-3 to clear mappings for other buttons.
Clear Mapping
M
M

Information
• Keys support turbo function include A/B/X/Y/L/R/LT/RT/DPAD.
• Setting in Keylinker App (download in app markets) is an option.
ADVANCED
Motion Assist
Press to activate.
Press again to disable.
Global Motion Assist
Please adjust the curve of the right thumbstick in Keylinker app according to games or
personal preference (indepedant control will be available later).
Motion Adjustment
When motion assist function is on, place the controller horizontally, hold A and B button
together for 2 seconds.
Calibration
Hold Motion Assist button for 2 seconds, light blinks, then press the button chosen to
activate.
Once succeed, the light blinks slowly. Motion assist function will be activated only when the
button is pressed.
Press again the Motion Assist button to shut off, the setting will be cleared.
Once the controller is shut off, the setting will be cleared.
Responsive Motion Assist +
When motion assist function is on, gyro sensor works as the right thumbstick, so to take
advantage of motion control in games not natively support.
The right thumbstick works as normal at the same time.