Syscom Video NTSC User manual

INSTRUCTION MANUAL
22x AutoFocus Zoom
WDR Day & Night Camera
22x AutoFocus Zoom
WDR Day & Night Camera
PRODUCTION RELEASE & REVISION
REV DESCRIPT'N/BUYER DWG No PARTS No.
NOTES
1.MODEL: HCB-G(H)10DZ1 / NOBRAND
2.MATERIAL: 모조지
BIND : STAPLES-2
BY
148(+/-5)mm
DATE
CHK
A INITIAL ------------------ 50302520 A.K.HAN N.C.PARK 04-21-M9
04-21-M9
105(+/-5)mm
3.COLOR: TEXT- BLACK
4.SIZE: 105(+/-5)mm x 148(+/-5)mm
5.LABEL: 50201270(81mm x 24mm)
6.ANY CHANGE OR ALTERNATION MUST BE
APPROVED BY HITRON DESIGN TEAM.
LABEL MANUAL NAME (50201270)
이선철
주임
TITLE
SIZE REV.
SCALE
MATERIAL
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN MM.
- TOLERANCE
LABEL +/- 3
MANUAL +/- 5
GUIDE +/- 5
COLOR
DATE
DRAWN
CHKED
APPROVALS
PARTS LIST
DESCRIPTION/MATERIAL
ITEM QTY
A4
DO NOT SCALE
2A
MANUAL INSTRUCTION
50302520
A.K.HAN
N.C.PARK 04-21-M9
04-21-M9
3
W.S.CHOI 04-21-M9

INSTRUCTION MANUAL
22x AutoFocus Zoom
WDR Day & Night Camera
22x AutoFocus Zoom
WDR Day & Night Camera

LIMITATION OF LIABILITY
ISSUE 1 - APRIL 2009
THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL
RESPECTS, HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY
CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION
CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR
NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH
CHANGES.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
product heat..
9. Do not defeat the safety purpose of the polarized or grounding-type
Plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for
long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE
BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE
RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
15. Use Certified/Listed Class 2 power source only.
thy
IMPORTANT SAFEGUARDS

TABLE OF CONTENTS
1. INTRODUCTION 1
1.1 THE CAMERA FEATURES 1
2. SYSTEM INSTALLATION 1
2.1 PACKAGE CONTENTS 1
2.2 OPERATION REQUIREMENTS 2
3. PART NAME & FUNCTION 1
4. CONNECTION 4
4.1 COLOR LEAD WIRE & COLOR DISPLAY LABEL 4
4.2 EXTERNAL DAY/NIGHT CONTROL 4
4.3 RS-485 CONNECTION 4
4.4 EXTERNAL LENS CONTROL 4
4.5 EXTERNAL A/D KEY CONTROL 6
5. CAMERA ADJUSTMENT 7
5.1 OSD MAIN SCREEN 7
5.2 MAIN MENU 9
6. TROUBLESHOOTING AND MAINTENANCE 11
6.1 TROUBLESHOOTING 11
6.2 MAINTENANCE 12
7. DIMENSIONS 12
8. SPECIFICATIONS 13

The 22x AutoFocus Zoom WDR Day & Night Camera provides especially for closed circuit
television (CCTV) and security surveillance application.
IMPORTANT : The user of this camera is responsible for checking and
complying with local, state, and federal laws and statutes concerning the
recording and monitoring of audio signals.
Use at the 12VDC Adapter must provide the power consumption of above 500mA.
Function : - D/N (Day / Night) - DSS (Digital Slow Shutter)
- M/D (Motion Detection) - WDR (Wide Dynamic Range)
- AWB (Auto White Balance) - AE (Auto Exposure)
- AGC (Auto Gain Control) - BLC (Back Light Compensation)
- OSD (On Screen Display) - D-Zoom (Digital Zoom)
- NEGA/POSI (Negative / Positive) - P/M(Privacy Mask)
- ALARM(Alarm out) - FREEZE (Rear & still picture)
- E Function (H / V Flip, Rotation)
Introduction
1
1.1 THE CAMERA FEATURES
High performance SONY 1/4" EXview HAD CCD
352x zooming capability (Optical : 22x / Digital : 16x)
Ultra Sensitivity Minimum illumination of 0.001 lux @F1.6 (low shutter)
Support camera control available
DC 12V input
CAUTION :
Excellent picture quality
Various picture effects
Flexible configuration
Use Certified/Listed Class 2 power source only.
RS-485
1
System Installation
2
Installation of the camera must be performed by qualified service personnel in accordance
with all local national electrical and mechanical codes must perform installation of the camera.
Perform the following steps to install the camera.
Camera - 1EA
Instruction Manual - 1EA
12pin Interface Cable - 1EA
Camera Mounting Bracket (option)
A/D Remote Controller (option)
2.1 PACKAGE CONTENTS

Parts Name & Function
3
Front view Rear view
1
2
89
14
10
11
12
13
Side view
7
3
4
5
6
4
3
6
5
7
2.2 OPERATION REQUIREMENTS
J-BOX
CAMERA.1
MULTIPLEXER
MONITOR CONTROLLER DVR / VCR
RS-485
RS-485
RS-485
VIDEO
CAMERA.2 CAMERA.3 ......
VIDEO
< Typical System Configuration >
2

8
7
6
5
4
3
1
2
Day & Night Zoom Lens
Integrated lens with 22x optical and 16x digital zoom.
Filter mount
Accepts commonly used filters with 37mm diameter.
Front Case
Mounting Adapter
Is used to mount the camera onto a bracket.
Case Body
Rear Case
Camera Module
Connector for control interface
12pin connector
PIN
485-
TX
EXT-OUT
EXT-IN
M/D OUT
COM
Description
RS-485(-)
RS-232 TXD IN
External Out
External In
Motion Detection OUT
Common
Description
RS-485(+)
RS-232 RXD IN
Ground
A/D KEY
Far (-), Near (+)
Tele (-), Wide (+)
PIN
485+
RX
GND
A/D KEY
FOCUS
ZOOM
3
TELE, WIDE Button
Zoom control: Push "WIDE" for wide angel views and "TELE" to zoom in.
MENU Button
Menu functions in the OSD display can be controlled when the OSD menu
is activated.
10
9
BNC connector
It connects the camera and the monitor or etc.
Power input terminal
Receives DC12V from the power supply.
Power Indicator
Is lit when the power is supplied.
NEAR, FAR Button
Press the "NEAR" side to focus on near objects and the "FAR" side to focus
on far objects. Focus buttons are activated when AF off mode.
DC12V GND NC
14
13
12
11