If the microphone stops working or emitting sound, it is recommended to replace the
batteries as soon as possible.
This device does not support 2 wireless microphones simultaneously.
The wireless microphone (included) can work simultaneously with a microphone connected
through he "Jack" socket (15)
Recording function
Press “REC/REC.PLAY” to record the voice into an external memory USB disc or a Micro-
SD card (TF card) on the speaker. If the external memory is being used for the first time, the
system will automatically build a new folder named “RECORD” and all the recorded files in it
will be named as REC001, REC002, and so on.
In recording mode, press “REC/REC.PLAY”/”INPUT” to stop recording.
Press and hold “REC/REC.PLAY” to play the recordings from the external memory. Press
PREV and NEXT to choose the desired recordings for payback.
The recording function is not available when connecting any type of device at the rear
“Guitar” input.
The rear input "Guitar" has its own volume control on the backside of the unit and only this
option can be used to change the volume levels when using this input.
Built-in BT functions
Select the BLUETOOTH mode using the “INPUT” switch on the top panel of the unit or from
the remote control itself.
Please ensure the BT devices you wish to connect has the Bluetooth function enabled and
visible.
Start the scan function from your device and search for “SY-XTR20”.
Once you have found the device, press on it and connect the speaker with the device.
When the connection is successful, a “tick” tone will be heard. If the speaker can’t be
connected, please restart the speaker or the device and try again.
After the connection is successfully established, you can begin to play music. To ensure
continuous stability of the music signal, try to keep the BT device and the mobile phone
facing one another.
The BT of the unit can be used up to 10 meters if there are no barriers.
