t.akustik ABSORBER User manual

ABSORBER
These instructions are for the following product: PET Ceiling Absorber 180
The following tools are needed for installation:
✓Level ✓Drilling machine ✓Pencil
✓Folding ruler ✓Drill bits
TOOLS
Open the package carefully! Inserting sharp objects
into the package can damage the absorber. Avoid
using long, sharp tools for opening the package!
UNBOXING
Carefully remove the products from the package and
read the mounting instructions carefully. Remove the
mounting accessories and the absorber.
REMOVE PRODUCTS
FROM PACKAGING
EN
MOUNTING INSTRUCTIONS
The following mounting accessories are included for
installation of the absorber:
✓4 × dowel ✓4 × adjustable wire rope
✓4 × screw M4×40 ✓1 × PET eece absorber
✓4 × screw hook ✓1 × drilling template
MOUNTING ACCESSORIES
Make sure to examine the condition and load carrying capacity of the ceiling before installation.
TIP:

Align and attach the template to the ceiling. Use the
template to mark the drilling locations through the
paper using a pencil.
Alternatively you can measure the distances of the
dowels inserted in the absorber and mark the measured
distances for the drilling holes at the ceiling.
USING THE TEMPLATE /
DETERMINE THE POSITION
Insert the four screw threads of the wire ropes in the
holder and fasten the screw threads. Make sure that the
wire ropes are guided through the recess of the holder.
FIX THE WIRE ROPE
Drill the holes at the markings using the drilling machine.
DRILL THE HOLES
Screw the four screw hooks in the dowels inserted in the
absorber.
FIX SCREW HOOKS
Insert the dowels into the drilled holes and fasten the
holder of the wire ropes with four screws M4×40 to the
ceiling.
Make sure that the included screws are suitable for the
condition of the ceiling.
INSERT DOWELS +
FASTEN HOLDER

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 522598_522600_522601_13.09.2021
Insert the hooks of the adjustable wire ropes into the
screw hooks of the absorber.
FIX THE ABSORBER TO
THE WIRE ROPES
Adjust the height of the absorber as you wish.
Fix the excess wire rope using cable straps.
ADJUSTING HEIGHT
Now you can use the absorber.
USING ABSORBER
This product is intended to be used to optimise the room acoustics. Any other use or use un-
der other operating conditions is considered to be improper and may result in personal inju-
ry or property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard!
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-
ckaging, etc. are properly disposed of. Do not just dispose of these materials with
your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
Find more solutions for
your room on our website:
www.takustik.com
Share your installation
with us on Instagram:
www.takustik.com/instagram
Find more installation
guides on YouTube:
www.takustik.com/youtube