T-Comfort Comfort Pro S User manual

Comfort Pro S/T-Comfort 930 DSL
Operation on Standard Terminals
User Guide

1
Contents
Systematic Telephony 5
■You Need Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
■Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
■Signals & Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
■Seizing an External Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
■Making Internal Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
■Making External Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
■Speed Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
■Accepting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
■Calls in the Queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
■Parking a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
■Accessing Your Voicebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Several Parties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
■Consultation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
■Toggling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
■Disconnecting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
■Transferring a Call and Notifying the Destination Party . . . . . . . . . . . . . . . . . . . . . . 13
■Transferring a Call without Notifying the Destination Party . . . . . . . . . . . . . . . . . . . 13
■Starting a Three-Party Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2
■Ending a Three-Party Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
■Connecting Two External Parties with Each Other . . . . . . . . . . . . . . . . . . . . . . . . . . 15
■Connecting Two Parties (Internal/External) with Each Other . . . . . . . . . . . . . . . . . 15
Call Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
■Call Waiting On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
■Accepting a Waiting Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
■Rejecting a Waiting Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
■Call Protection On/Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
User Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
■Pick-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
■Pick-up Selective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
■Logging out of/into All Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
■Logging out of/into Individual Hunt Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
■Call Forwarding “Immediately“ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
■Call Forwarding “On Busy“ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
■Call Forwarding “After Delay“ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
■Call Forwarding for Other Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
■MSN Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
■All Call Forwarding Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
■Follow Me . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
■Call Forwarding for Specific Call Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3
Special Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
■VIP Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
■Baby Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
■Announcement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
■Intercom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
■Dialout for Another Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
■Callback on Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
■Door Opener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
■Entrance Intercom Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
■Keypad Dialling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Even More Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
■Telephone Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
■Calling Line Identification Restriction (CLIR) on a Call-by-Call Basis . . . . . . . . . . 33
■Changing the User PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
■Intercept. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Special Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
■Deactivating Least Cost Routing (LCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
■Calling Selectively via Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
■Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
■Deleting All Call Forwarding in the Exchange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4
Remote-Controlled Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
■Remote-Controlled Dialling (Call Through). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
■Remote-Programmable Call Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
■Calling a Voicebox from a Remote Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
■Setting up an Internet Connection from Remote (ISP Trigger Call) . . . . . . . . . . . . 40
Index 41

5
Systematic Telephony
Systematic Telephony
The Comfort Pro S and T-Comfort 930 DSL communications systems, referred to hereafter as “the
Comfort Pro S/T-Comfort 930 DSL“, enables the connection of standard terminals (standard analogue tele-
phones, ISDN telephones and cordless GAP telephones). SMS-enabled terminals can also be used. With this
configuration you can telephone conveniently and use the features of the Comfort Pro S/T-Comfort 930 DSL
via code-number procedures.
This guide describes how you operate your telephone in order to use the desired functions. In most cases,
you can do this by pressing the key combination *and #, R, together with a specific sequence of digits.
Please note the specific operating characteristics of your telephone:
On standard analogue telephones featuring pulse dialling, it is not possible to enter data with the star key
*or hash key #.
As a result, the functionality of the Comfort Pro S/T-Comfort 930 DSL features is only available to you on a
limited basis. It is thus better to use telephones equipped with dual-tone multi-frequency (DTMF) dialling.
Modern telephones often allow you to switch between the two dialling modes.
In the case of ISDN telephones, certain features can be operated via menus or function keys. Refer to the
operating instructions of these telephones for details.
On telephones with a display, you can read the caller’s telephone number if the telephone supports this
feature and the caller has activated it. What other information is displayed depends on the telephone. Charge
display (ISDN telephones only) requires prior configuration by your network operator.
You Need Authorisation
Most of the features mentioned in this Quick Reference Guide are only available to you if you have appro-
priate authorisation. This will be set up by your system administrator when configuring the Comfort Pro S/
T-Comfort 930 DSL. If you are unable to use a particular feature or have any questions, consult your system
administrator. Please refer to the chapter entitled “Frequently Asked Questions“ in the “Mounting and Com-
missioning“ user guide for tips on how to deal with any faults you may experience while using your telephone.

6
Systematic Telephony
Glossary
If you would like more details about any of the system features described in this Quick Reference Guide,
please refer to the “Glossary“ supplied with your Comfort Pro S/T-Comfort 930 DSL (see PDF file on the
enclosed CD-ROM).
Signals & Symbols
Audio and ringer signals
You will find a table showing the audio and ringer signals on the inside back cover of this user guide (the page
before last of the PDF file).
Symbols
Hlift the handset
GR press the R key during the current call (“consultation call“ mode)
*press the star key
7press digit key “x“ (7 here)
#press the hash key
Z(xxx) dial the digits of the telephone number (tel. no.) “xxx“
G…speak
hhang up the handset

7
Making Calls Systematic Telephony
Making Calls
Seizing an External Line
If your telephone is set to manual line seizure, all call keys on your telephone first seize an internal line, and
you can dial an internal number straight away. When making external calls, you must first press the line
seizure code digit (presetting: 0).
NNote: This also applies to all enquiry calls and call forwarding to external destinations,
but not to call forwarding “MSN“.
Your system administrator configures this code digit for all subscribers on the Comfort Pro S/
T-Comfort 930 DSL system and will tell you what value is currently valid.
If your telephone is set to automatic line seizure, all call keys on your telephone seize an external line, and you
can dial external numbers straight away. In order to reach internal subscribers, press the star key twice *
*before dialling the internal number.
NNote: This also applies to the destination numbers you specify when configuring call
forwarding or a baby call.
If you hear the external dialling tone when you lift the handset, your terminal has been set to automatic
seizure of the external line. If, on the other hand, you hear the internal dialling tone when you lift the handset,
your terminal has been set to manual seizure of the external line.
Please refer to the table showing the audio and ringer signals on the inside back cover of this user guide (the
page before last of the PDF file). If you have any questions regarding this topic, consult your system adminis-
trator.

8
Systematic Telephony Making Calls
Making Internal Calls
H** Z(internal tel. no.) On automatic seizure of external line
HZ(internal tel. no.) On manual seizure of external line
Making External Calls
HZ(external tel. no.) On automatic seizure of external line
HZ(external access code, e.g.
0) (external tel. no.)
On manual seizure of external line
Speed Dialling
H*7Z (speed-dialling no.)
For consultation calls:
GR*7
Z(speed-dialling no.)
You can use this procedure to retrieve a number from the central tel-
ephone book by entering its two-digit or three-digit speed-dialling
number (speed-dialling no.). The two-digit speed-dialling numbers
are in the range 00…99, the three-digit are in the range 000…999.
Ask your system administrator how many digits are valid.
Alternatively:
H*7*
Z(speed-dialling no.) #
For consultation calls:
GR*7*
Z(speed-dialling no.) #
The central telephone book is managed by users who have appro-
priate authorisation. The Comfort Pro S/T-Comfort 930 DSL can
store up to 2,000 telephone numbers, for each telephone number
up to three speed-dialling numbers can be configured.

9
Making Calls Systematic Telephony
Accepting a Call
HG… When your telephone rings, lift the handset or press the hands-free
key. The type of ringing signal indicates (on a standard analogue tel-
ephone) whether it is an internal or external call.
Calls in the Queue
G… Your system administrator can configure and activate a queue
feature for your telephone in the Comfort Pro S/T-Comfort 930 DSL.
New calls can enter this queue while you are making a call. The
callers in the queue hear a ringing signal. The number of calls
allowed in the queue is set by the system administrator during
system configuration, e.g. 5 calls. When this number is reached,
additional callers hear a busy signal. The calls in the queue are put
through according to their priority (baby calls, doorway calls, VIP
calls, other internal and external calls); calls in the same category
are lined up according to the time of their arrival.
Calls which have been queued for too long a time are removed;
these callers subsequently also hear the busy signal. The time until
an external call is cleared from a queue is defined by the network
operator. In Germany this is usually two minutes and in other
European countries usually three minutes.
A queue for your telephone can also be administered when it is part
of a user group, and at the same time it has an effect on the for-
warding of calls. For details, please refer to User Groups starting
on page 17 and Forwarding Calls starting on page 19.
NNote: If a queue for your telephone is active, it may be wise to activate call protection.

10
Systematic Telephony Making Calls
Parking a Call
Parking a call
GR*16
(Park-Codes 0-9) h
Unparking a call
H*16 (Park-Codes 0-9)
You can park one or more calls to make other calls or put down the
receiver and engage in other activities. Parked calls are recorded
system internal in a list. You can park up to 10 calls.
Parking and unparking a call can be made on different terminals.
On ISDN telephones you can park/unpark calls using a menu.
Authorisation for parking connections and the period of time after
which a recall will be executed are defined by the administrator
during the configuration of the system.
Accessing Your Voicebox
If your system administrator has configured a voicebox for the telephone number of your terminal, calls which
you do not (or cannot) accept are diverted to this box. A number of analogue telephones and ISDN tele-
phones support the “Message Waiting Indication“ feature, that is the notification of messages on the tele-
phone. In this way you are notified, for example, of not listened to messages. Please review the user guide of
the manufacturer.
You can access and edit voicebox messages from your telephone:
Calling your voicebox directly …
(from a telephone whose number is assigned to your voicebox)
1. Enter the telephone number your system administrator has configured for the Comfort Pro A IAB
(answering machine) application.
2. If the PIN query for the voicebox is activated, enter your PIN after the prompt. This query always appears
for a new voicebox. The default PIN setting is “0000“.
You will now be directly connected with your voicebox. The Comfort Pro A IAB (answering machine) ap-
plication will inform you if there are any new messages in this voicebox.

11
Making Calls Systematic Telephony
3. You can now access and edit messages and make settings for the voicebox.
4. Please follow the instructions in the voice menu for all further operating steps.
Via the Comfort Pro A IAB (answering machine) application …
(from a telephone whose number is not assigned to your voicebox)
1. Enter the internal telephone number which your system administrator has configured for the
Comfort Pro A IAB (answering machine) application.
You hear a text prompting you to enter a voice-box number.
2. Now enter the telephone number of the terminal whose voice-box messages you wish to access. Confirm
the input by pressing *.
It is not possible to access your voicebox unless the authorisation for “remote access“ has been activated.
3. If the PIN query has been activated for the voicebox, enter your PIN after the prompt.
The Comfort Pro A IAB (answering machine) application will inform you if there are any new messages in
this voicebox.
4. You can now access and edit messages and make settings for the voicebox.
5. Please follow the instructions in the voice menu for all further operating steps.
NNote: For detailed information on the use and operation of the Comfort Pro A IAB (an-
swering machine) application, please refer to the user guide for the optional compo-
nent “Comfort Pro A IAB“.

12
Systematic Telephony Several Parties
Several Parties
Consultation
Internal:GR Z(internal tel. no.
or speed-dialling no.) G…
External:GR Z(external tel. no.
or speed-dialling no.) G…
You can speak with a second internal or external party during a call
by putting the first party on hold.
After ending (disconnecting) the consultation call, you can return to
the party on hold (see Disconnecting a Call on page 12).
Toggling
GR2G… You can toggle (i.e. switch back and forth) between two calls.
On ISDN telephones you toggle between two connections by means
of the corresponding function key or a menu.
If you want to talk to both parties at the same time, you can set up a
three-party conference (see Starting a Three-Party Conference on
page 14).
Disconnecting a Call
GR1G… When you have several calls, you can disconnect one (e.g. a consul-
tation call) without hanging up the handset.
On ISDN telephones you disconnect calls by means of the corre-
sponding function key or a menu.

13
Several Parties Systematic Telephony
Transferring a Call and Notifying the Destination Party
GR (external access code,
e.g. 0) Z(destination no.)
G…h
You can transfer an incoming call to another internal or external
number. After notifying the other party of the transfer, hang up the
handset.
If the party to whom you want to transfer the call is unavailable or
busy, disconnect this call by pressing the Rkey. You will again
hear a dialling tone and can set up a new consultation, or press the
Rkey once more to speak to the party on hold again.
To connect an external party with an external party use the pro-
cedure described in the section Connecting Two External Parties
with Each Other on page 15.
Transferring a Call without Notifying the Destination Party
GR (external access code,
e.g. 0) Z(destination no.) h
You can transfer an incoming call to another internal or external des-
tination. When you hear the ringing signal, hang up the handset.
If the call you wish to transfer is not accepted within a certain length
of time, you will receive an automatic recall. You are reconnected
with the original caller after lifting the handset. The length of time for
the automatic recall is set by your system administrator in the Con-
figurator for all Comfort Pro S/T-Comfort 930 DSL users.
If the party to whom you want to transfer the call is busy, disconnect
this call by pressing the Rkey. You will again hear a dialling tone
and can set up a new consultation, or press the Rkey once more
to speak to the party on hold again.

14
Systematic Telephony Several Parties
To connect an external party with an external party use the pro-
cedure described in the section Connecting Two External Parties
with Each Other on page 15.
Starting a Three-Party Conference
GR3G… You are speaking with someone on the telephone. You set up a
further connection (e.g. by consultation or by accepting a call). You
can toggle between these parties (see Toggling on page 12) or
press the keys R3 to start a three-party conference and speak
to both parties at the same time.
On ISDN telephones you start a three-party conference by means of
the corresponding function key or a menu.
Ending a Three-Party Conference
Toggle: GR2
End: h
To end a three-party conference and continue telephoning with only
one of the other two parties, press the keys R2 to switch to the
toggle mode. Then you can disconnect one of the parties (see Dis-
connecting a Call on page 12). You end a three-party conference
by replacing the handset.
On ISDN telephones you end a three-party conference by means of
the corresponding function key or a menu.

15
Call Protection Systematic Telephony
Connecting Two External Parties with Each Other
R#h You are speaking with an external party and have another (external)
call on hold. With this procedure you can connect the two parties
with each other.
On ISDN telephones you use the corresponding function key or a
menu.
SPlease note: If you connect two external parties whom you called, you will be
charged for the cost of the resultant call.
Connecting Two Parties (Internal/External) with Each Other
hYou are speaking with an external party and have another (internal)
call on hold. You can connect the two parties with each other by
simply hanging up the handset.
Call Protection
Call Waiting On/Off
On: H*43#
Off: H#43#
If you are called while you yourself are telephoning, you will hear the
call-waiting signal which tells you that there is a second party
wishing to speak to you. You can deactivate the call-waiting signal
(call waiting off, call-waiting protection on) and reactivate it (call
waiting on, call-waiting protection off). When call-waiting protection
is active, the caller hears a busy signal.

16
Systematic Telephony Call Protection
On ISDN telephones you activate/deactivate the call waiting tone by
means of the corresponding function key or a menu.
Accepting a Waiting Call
End: GhHG…
Toggle: GR2G…
While you are telephoning, the call-waiting signal tells you that there
is a second party wishing to speak to you. You can end the first call
and accept the new call; or you can hold the first call, accept the
second call and toggle between the two.
If you toggle between the parties, you can also start a three-party
conference (see Starting a Three-Party Conference on page 14).
On ISDN telephones you accept the call request indicated by the
call-waiting signal by means of the corresponding function key or a
menu.
Rejecting a Waiting Call
GR0G… While you are telephoning, the call-waiting signal tells you that there
is a second party wishing to speak to you. You can reject the waiting
call, in which case the caller will then hear a busy signal.
On ISDN telephones you reject a waiting call by means of the
corresponding function key or a menu.

17
User Groups Systematic Telephony
Call Protection On/Off
For all (internal and external) calls
On: H*42#
Off: H#42#
Only for internal calls
On: H*421#
Off: H#421#
Only for external calls
On: H*422#
Off: H#422#
You can protect your telephone against receiving internal and
external calls (except VIP and hunt group calls).
When configuring your user group, your system administrator sets
whether a caller hears a dial tone or an engaged tone when call pro-
tection is activated; ask him for the setting which applies to you.
When call protection is activated, you hear the special dialling tone
after lifting the handset.
User Groups
Pick-up
H*0#G…
For consultation calls:
GR*0#G…
If another telephone in your pick-up group rings, you can pick up
the call on your telephone. If a queue is active for the other tele-
phone, you will pick up the next call lined up in this queue. Pick-up
groups are configured by your system administrator.
NNote: If pick-up protection is activated in the called party’s user group, you cannot pick
up calls to his telephone number.

18
Systematic Telephony User Groups
Pick-up Selective
H*0*
Z(internal tel. no.) #G…
For consultation calls:
GR*0*
Z(internal tel. no.) #G…
If a telephone outside your hunt group rings, you can pick up this
call (with the telephone number of the party who is being called). If a
queue is active for the telephone of this other party, you will pick up
the next call lined up in this queue.
NNote: If pick-up protection is activated in the called party’s user group, you cannot pick
up calls to his telephone number selectively.
Logging out of/into All Hunt Groups
Logout: H*31#
Login: H#31#
You can log out of or into all hunt groups configured for you.
Logging out of/into Individual Hunt Groups
Logout: H*31*
Z(internal tel. no.) #
Login: H#31*
Z(internal tel. no.) #
Using your own telephone number, you can log out of or into indi-
vidual hunt groups configured for you.
All hunt group calls are configured by your system administrator.
NNote: Your logout from a hunt group will not go into effect if you are the last available
member of a hunt group. The system ensures that incoming calls for a group can al-
ways be signalled to at least one terminal.