To#remove#FZ-G1#Hand#Strap#use#a#Phillips#Screw#Driver.##Be#sure#that#none#of#the#
parts#are#lost#in#case#you#would#like#to#use#this#hand#strap#again.#
#
Install#the#Tablet#EX#Gear#Hand#Strap#Replacement#as#shown#below.##Note:#one#of#
the#supplied#machine#screws#is#2#mm#shorter#than#the#other#seven#–#12#mm#versus#
14#mm.##This#shorter#machine#screw#must#only#be#used#in#the#location#indicated#on#
the#image#below.##Failure)to)do)so)may)damage)your)tablet)computer!)
)
#
Hand#tighten#the#machine#screws#on#all#four#corners#of#the#tablet#as#shown#above.##
The#machine#screws#should#be#snug#but#not#over#tightened#or#the#threads#may#be#
damaged.##
#
#