Takeway T-TH01 User manual
1
2
Loose the Quick release knob A
of Takeway ® T1 and remove B
Quick release clip.
B
A
Install T-TH01 Tablet Holder,
screw in B Quick release clip on
the back of the Tablet Holder
with a coin or a flathead
screwdriver. Screw in tightly, so
that the Tablet Holder will not
get loose.
B
B
A
B
TEL:04-2406 5031
www.takeway.tw
T-TH01 Table Holder is an accessory for Takeway ® T1 Clampod.
T-TH01 can be used for tablets with sizes from 7” to 10.2”. Before
using the Tablet Holder, please install the base first, so that you can
shoot in standing position at any time.
Before using the product for the first time, please
read through the user guide.
Please use this product correctly after fully
understanding the content of the user guide.
USER
GUIDE
T-TH01
T-TH01
Tablet Holder
USER
GUIDE
Tablet Holder
All information described in this user guide is based
on the test standard of Takeway. Sorry for the
inconvenience caused if there are any errors. The
design and specifications of this product are
subject to change without notice.
Copyrighted: All Rights Reserved
TABLE EN 2014/03
Coins
3
4
5
6
7
Choose a proper place of the jaw
of F . Clamp the tripod on a
proper location. After it is done,
shake the clamp gently to make
sure it is fixed tightly so that it
will not drop.
F
F
C
D
E
When using the Clampod in
standing position, H ballhead
knob can adjust the Tablet to a
proper angle. Balance and
collision of the clamp has to be
kept and avoided so that no
falling can be occurred.
H
Mount B Quick release clip with
the Tablet on G Quick mounting
platform and lock the clamp with
A Quick release knob. When
shooting, please use H ballhead
knob to rotate the Tablet freely in
360 degree. Adjust the Tablet to
a proper position and start
shooting.
B
G
A
H
B
A
G
H
H
Press the fasteners extending
button and adjust fasteners C
and D to a proper position. Place
the Tablet close to the bottom of
the Holder.
Press the E point of the top of
the fastener C to fasten the
Tablet. Please shake the Holder
gently to make sure it was firmly
fastened.
Point
C
C
E
D
T-TH01
Tablet Holder
USER
GUIDE
Extending
button
Table of contents
