Takex AV-100E User manual

2PRECAUTIONS Be sure to observe
Instruction Manual
1PARTS DESCRIPTION
3ANGLE ADJUSTMENT
4HOW TO RECORD AND ADJUST
AV-100E (POWER:12VDC)
VOICE SPEAKER
Thank you for purchasing a TAKEX product. Please read this Instruction Manual carefully for correct and effective use.
Please Note : This voice speaker is designed to give an message after being triggered by a PIR etc. : it is not a burglary-preventing device.
TAKEX is not responsible for damage or losses caused by accident, theft, Acts of God ( including inductive lightning ), abuse, 
misuse, abnormal usage, faulty installation or improper maintenance. Regular maintenance and inspection (at least annually)
by the installer and frequent testing by the user are vital to continuous satisfactory operation of any system.
Body
Speaker
●
Install the voice speaker
to face downwards.
Indication LED
(Built-in)
Window Mounting Flange
Rotary arm
Rotary arm fixing bolt
Swing arm fixing bolt
Fixing screw
Swing arm
4c cord (length : 20", 0.5m)
▲
▲
30°
90°
▲
▲
▲
▲
▲
▲
▲
▲
Microphone
Indication LED
(Built-in)
Sound volume
Recording switch
Rubber cover
▲
[RECORDING]
[ADJUSTMENT]
(1) Sensor - Remove the cover of microphone on the bottom.
(2) Turn on the power supply.
(3) While pressing the recording switch and record with keeping
10cm away sound source (mouth etc.) from the microphone.
Release the recording switch when the recording is finished.
●Do not disassemble or modify this device. This may cause a fire,
electrical shock, or malfunction of the device.
●If the following events occur, turn off the power of the unit immediately,
and ask the place of purchase for repair. Failure to follow this may result
in fire, electric shock, and/or malfunction.
・Smoke, abnormal odor, and/or sound are found
・Liquid, such as water, and/or foreign material has entered the unit
・The unit has deformed and/or damaged parts
●Do not apply impact to the unit.
Strong impact may result in performance deterioration and/or damage to
the unit.
●The unit may not operate properly near devices that generate a strong
electric or magnetic field.
Also, devices near the unit may not operate properly due to the magnetic
field and/or magnetism generated from the unit.
Make sure to confirm before operation.
●Make sure to perform a sufficient operation check on the whole system
before operation.
●Sound playback time is approx. 12 secs. During playback, further input
signals does not extend the time period, or repeat playback.
●Do not splash water on to the speaker, although it is rain-proof, it is not
water-proof.
●
Give careful consideration to sound volume level, especially if used at night.
Angle adjustment unit with
three-part rotation mechanism
as drawn right makes it to
adjust many angles.
Adjustment angles are limited
as shown in the below
diagrams.
Change to install as right figure.
Adjustable between silence
to max. (100dB : 1m)
90°
▲
▲
▲
▲
▲
▲
±180°
±180°
Adjustment
Unit
120°
●
Install the window to be vertically
beneath the body.
Microphone
(4) Check the recorded message by short-circuiting the input signal line.
(If the message is not recorded correctly, please try to re-record.)
(5) Put the microphone cover back in place.
▲
Self Tapping Screws
φ4×30： 4 pcs.
*Record level function is also equipped with INDICATION LED.
LED blinking while recording is a right level.
(Over level : LED off, Below level : LED on)
(Sound volume)
* Record the message in a room where there is
no noise and the wind does not blow.
*Record time is while a recording switch is
being pressed. (Max. 12 seconds.)
*Be careful so as not to press the recording
switch after recording.
If the recording switch is pressed, the previous recorded message are deleted
by overwriting
*Do not record mechanical sounds such as buzzer or siren.
It gives a load to the speaker and may cause a malfunction.
*
The recorded message will not disappear even if it is stored in non-energized
state.

Do not install this device in a location that cannot
support its weight. This may cause the device to fall
and cause an injury or malfunction of the device.
9EXTERNAL DIMENSIONS
5WIRING
6INSTALLATION
7TROUBLESHOOTINGS
8SPECIFICATIONS
Limited Warranty :
TAKEX products are warranted to be free from defects in material and
workmanship for 12 months from original date of shipment. Our warranty
does not cover damage or failure caused by Acts of God, abuse misuse,
abnormal usage, faulty installation, improper maintenance or any repairs
other than those provided by TAKEX. All implied warranties with respect to
TAKEX, including implied warranties for merchantability and implied
warranties for fitness, are limited in duration to 12 months from original date
of shipment. During the Warranty Period, TAKEX will repair or replace, at its
sole option, free of charge, any defective parts returned prepaid. Please provide
the model number of the products, original date of shipment and nature of
difficulty being experienced. There will be charges rendered for product
repairs made after our Warranty Period has expired.
↑
▲
▲
▲
▲
▲
▲
4 cores cable
(non-Polarity) Contact capacity
10mA or more
10 to 14VDC
MAX500mA
WBK GBL
COM NO
POWER SUPPLY DRY CONTACT INPUT N.O.
(φ66.7mm)
φ2.63"PCD
(φ83.5mm)
φ3.29"PCD
(φ104mm)
φ4.09"
Fixingholes
▲
▲
▲
▲
▲
▲▲
▲▲
▲
▲
▲
90°
▲
0.2"
(5mm)
▲▲▲
▲
▲
▲
▲
▲▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
90°
φ4.53"
(φ115mm)
4.51"
(114.6mm)
1.44"(36mm)
7.87"(200mm)
1.1"(28mm)
Wall mounted
Ceiling mounted
LED(Built-in)
(Built-in)
Cord length : 20"(0.5m)
3.5"(89mm)
(25mm) 0.98"
(20mm) 0.79"
360° variable 360°
variable
(41mm)
1.61"
variable
Recording switch
Wiring hole
▲
microphone
Volume control
(1) Complete Recording. (See 4.)
(2) Select installation position
which should be vertical.
(See 2,3.)
(3) Complete wiring.
(4) Fix flange by tapping screws,
4pcs, attached.
(6) Loosen slightly Rotary arm
fixing volt, fixing volt, Swing
arm fixing volt and fixing
screw of Rotary arm. Decided
the angle of the speaker,
tighten all the volts/screws
again.
(7) Put the power on.
(8) Input an extemal signal and
confirm the operation. Adjust
sound volume.
(5) Insert body to mounting flange
by loosening fixing screw of
rotary arm.
●No power (including
wire break).
●Check power cord
and power voltage
are right.
●Correct wiring.
●Correct the contact of
input signal to N.O.
●Check the wiring of
input signal line.
●The contact of input
signal is N.C.
●Too low power voltage.
Inactive at all
Malfunction
continues
Symptom How to check problems Remedy
No.05-996 1709
Wiringhole
↑
CONNECTION
SPECIAL NOTICE
If the mounting flange is used, set it
so that the wiring hole is underneath.
Ensure sufficient rain proof
treatment is given to the
surrounding of the flange, fixing
screws and wiring hole.
Description
Model
Power supply
Current consumption
Alarm input
Sound synthesis method
Record method
Record / Playback time
Sound output
Indication LED
Ambient temperature
Mounting position
Weight
Appearance
Operation : One-shot playback (12 sec.) by alarm input signal
(No retrigger during playback)
Sound volume :
Max.100dB/2W(1m ahead) at aright recording level
Adjustable from 0 to Max by volume switch
Recording level is indicated :
“Blinking” : good “ON” : too low “OFF”: tooloud
Playback : ON(during playback )
(Built-in)
In Japan
Takex America Inc.
4/15 Howleys Road, Notting Hill,
VIC, 3168
Tel : [phone]
Fax : [phone]
Takenaka Engineering Co., Ltd.
83-1, Gojo-sotokan,
Higashino, Yamashina-ku,
Kyoto 607-8156, Japan
Tel : [phone]
Fax : [phone]
http : // www. takex-eng. co. jp /
Takex America Inc.
151 San Zeno Way
Sunnyvale,
CA 94086, U.S.A
Tel : [phone]
Fax : [phone]
http : // www. takex. com
Takex Europe Ltd.
Aviary Court, Wade Road,
Basingstoke, Hampshire. RG24 8PE, U.K.
Tel : [phone]
Fax : [phone]
http : // www. takex. com
In the U.S. In the U.K.
In Australia
Voice Speaker
AV-100E
10 to 14VDC (non-polarity)
20mA or less(Standing by)
500mA or less (M
ax. )
Dry contact relay : N.O. ( contact capacity:10mA )
PCM method
Built-in condenser microphone
Max 12 secs.
ー20℃ to ＋ 50℃
without condensation and freeze
Indoor / outdoor (rainproof)
Apprcx.1000g
Body: Resin(Black )