Tamron AF 18-200mm F/3.5-6.3 XR Di II LD Aspherical User manual

m
ft
10
3
0.7
0.5
2
1
0.35
1.5
1.25
0.4
1
3
15
13
10
9
11
6
7
8
5
4
3
2
1
m
ft
100
30
7
3
2
8
5
3
1.48
0.45
1
20
50
100
70
135
35
18
200
13
12
11
10
9
8
7
6
5
4
3
2
1
70
100
85
135
55
200
13
11 15
10
9
8
4
1
17
16
m
ft
10
3
0.7
0.5
2
1
0.35
1.5
1.25
0.4
1
3
m
ft
100
30
7
3
2
8
5
3
1.48
0.45
1
20
50
100
70
135
35
18
200
70
100
85
135
55
200
200 135 100 70 50 35 18
LOCK
200 135 100 70 50 35 18
LOCK
200 135 100 70 50 35 18
LOCK
200 135 100 70 50 35 18
LOCK
m
ft
100
30
7
3
2
8
5
3
1.48
0.45
1
20
2
1
m
ft
100
30
7
3
2
8
5
3
1.48
0.45
1
20
50
100
70
135
35
1
8
200
3
m
ft
100
30
7
3
2
8
5
3
1.48
0.45
1
20
2
1
55
85
70
100
135
0
2
1
5
5
2
1
200
100
85
70
135
1
3
1
200
1
35
21
Fig. 3
Ziehen Sie Zoom-Lock rückwärts, um den Zoom-Ring zu verriegeln.
Poussez le bouton de blocage du zoom vers le boîtier pour bloquer la
bague de réglage du zoom.
Tire hacia atrás del bloqueo del zoom para bloquear el anillo del
zoom.
Trek de knop naar achteren om de zoomring te vergrendelen.
Puxe o botão de travagem do zoom para travar o anel de zoom.
Spostate all´indietro l´interruttore di blocco dello zoom per bloccare
lo zoom.
Fig. 4
Drücken Sie Zoom-Lock, um den Zoom-Ring freizugeben.
Poussez le bouton de blocage du zoom pour libérer la bague de
réglage du zoom.
Empuje el bloqueo del zoom para liberar el anillo del zoom.
Duw de knop naar voren om de zoomring te ontgrendelen.
Empurre o botão de travagem do zoom para libertar o anel do zoom.
Spingete in avanti l´interruttore di blocco dello zoom per sbloccarlo.
Fig. 5& 6
Canon AF-umschaltung ON (links), OFF (rechts).
Canon AF : sélecteur ON [marche] (gauche), OFF [arrêt] (droite).
Selector AF Canon ON (izquierda), OFF (derecha).
Canon AF-schakelaar AAN (links) en UIT (rechts).
Canon AF botão ON (esquerda), OFF (direita).
Interruttore/commutaatore AF su obiettivi Canon EOS “ON” (sicistra),
“OFF” (destra).
TLM-EFDSINPC-A13A14A15A16A18-U-1010
쎲SP AF11-18mm F/4.5-5.6 Di II LD Aspherical [IF](Model A13)
쎲SP AF17-50mm F/2.8 XR Di
II LD Aspherical [IF](Model A16)
쎲AF18-200mm F/3.5-6.3 XR Di
II LD Aspherical [IF]Macro (Model A14)
쎲AF18-250mm F/3.5-6.3 Di
II LD Aspherical [IF]Macro (Model A18)
쎲AF55-200mm F/4-5.6 Di
II LD Macro (Model A15)
1
2
3
7 8 9
0 - =
q w
r
e
4 5 6
* The Marking is a directive conformity mark of the European Community (EC).
* Das -Zeichen entspricht der EC Norm.
* La marquage est un marquage de conformité à la direcive CEE (CE).
* La marca es marca de conformidad segun directiva de la Comunidad Europea (CE).
* Il marchio attesta la conformita alla directtiva della Comunità Europea (CEE).
*
TAMRON CO., LTD.
<Overseas Sales Dept.>
1385, Hasunuma, Minuma-ku, Saitama-shi, Saitama 337-8556 JAPAN
Tel : [phone] Fax : [phone]
The EEC Conformity Report applies to the
Council Directive 98/336/EEC, 92/31/EEC,
93/68/EEC and is used by Tamron Co., Ltd.,
manufacturer of this product.
A13
A13
A15
A14, A16, A18
Focusing Zooming A15 Focusing Zooming
A14, A16, A18 Focusing Zooming
Nikon Canon Sony쏄Pentax
A13
A15
A14
A16
A18
15 13
13
14
15
15
13
200 135 100 70 50 35 18
LOCK
12
13
11 15
200 135 100 70 50 35 18
LOCK
13 11
12
15
200 135 100 70 50 35 18
LOCK
13
14 11
12
15
200 135 100 70 50 35 18
LOCK
13 11 15
12
135 100 85 70 55
11
13
15
135 100 85 70 55
11
13
14
15
135 100 85 70 55
13 11 15
A14 Only
쏄Konica Minolta 움

Thank you for purchasing the Tamron lens as the latest addition to your photographic
equipment. Di II lens (Digitally Integrated) series are designed for digital SLR cameras
with image sensors equivalent to APS-C size. Before using your new lens, please read
the contents of this Owner’s Manual thoroughly to familiarize yourself with your lens
and the proper techniques for creating the highest quality images possible.With proper
handling and care, your Tamron lens will give you many years of photographing
beautiful and exciting pictures.
폷Explains precautions that help to prevent problems.
폷Explains things you should know in addition to basic operations.
1Lens hood
2Hood attaching alignment mark
3Hood attaching indicator
4Filter ring
5Hood attaching bayonet ring
6Distance index
7Distance scale
8Focusing ring
9Zooming ring
0Focal length scale
-Zoom index mark
=Zoom lock switch (A14 & A16: Figs. 3& 4)
qLens mount/Lens mount contacts (Nikon)
wAF-MF altering switch (Canon Fig. 5& 6)
eLens attachment mark
rBayonet tab on the hood
tBayonet tab on the lens
A13 A14 A15 A16 A18
Focal Length 11-18 mm 18-200 mm 55-200 mm 17-50 mm 18-250 mm
Maximum Aperture F/4.5-5.6 F/3.5-6.3 F/4-5.6 F/2.8 F/3.5-6.3
Angle of View 103°29
' - 75°33 ' 75°33' - 7°59 ' 28°28' - 7°59 ' 78°45' - 31°11 ' 75°33' - 6°23 '
Lens Construction 12/15 13/15 9/13 13/16 14/16
Minimum Focusing 0.25 m (throughout the 0.45 m 0.95 m (throughout the 0.27 m (throughout the 0.45 m (throughout the
Distance entire zoom range) entire zoom range) entire zoom range) entire zoom range)
Filter Size ø77 mm 62 mm 52 mm 67 mm 62 mm
Length 78.6 mm 83.7 mm 83.0 mm 83.2 mm 84.3 mm
Diameter ø83.2 mm 73.8 mm 71.6 mm 73.8 mm 74.4 mm
Weight 345 g 398 g 295 g 430 g 430 g
Lens Hood DA13 DA06 DA15 DA09 XXXX
폷Lengths and weights listed in lens specifications are for lenses with Nikon mounts.
폷Features and cosmetic designs of lenses listed in this owner’s manual may be revised
without notice.
쐽How to mount the lens
Removing the rear cap of the lens. Align the Lens attachment mark eon the lens
barrel with its counterpart on the camera mount and insert the lens.
Rotate the lens clockwise until it click-locks. For Nikon and Pentax models, align the
lens attachment mark on the camera and the Lens attachment mark eon the lens
to attach the lens. For Nikon models, align the lens attachment mark with the dot on
the camera and rotate the lens counter-clockwise until it click-locks.
쐽How to detach the lens
Pressing the lens release button on the camera down, turn the lens counter-clockwise
(in case of Nikon lens, clockwise), and lift the lens off the camera’s lens mount.
폷The image circles of Di II lenses are designed to match the digital SLR cameras using
the image sensors equivalent to APS-C (approx. 15.5҂23.2mm) . Do not use Di II lenses
with cameras using image sensors larger than APS-C. Using Di II lenses with such
cameras may cause vignetting on the image.
폷Some Canon digital SLR cameras have index marks for attaching both EF lenses (red)
Aand EF-S lenses (white) Bon the bayonet mount.
To attach Tamron DiII lenses, align the lens attachment mark on the lens ewith the
index mark for EF lenses (red) A. Do not forcibly align the indicator on the lens e
with the index mark for EF-S lens (white) B.
Doing so could result in damage to the lens and/or camera.
폷For further details, please read the instruction manual of your camera.
Switch the focusing mode switch of the camera to Auto focusing mode (AF) in case of
Nikon, Sony or Pentax. In case of a Canon camera, switch the AF/MF switch won the
lens to AF. (Fig. 5). Press the shutter button lightly while viewing through the camera’s
viewfinder, the lens focuses automatically. An in-focus mark will light when lens focuses
on the main subject sharply. Press the shutter button further to photograph.
폷When set on AF mode, interfering with focusing ring 8may cause serious damage to
the lens mechanism.
폷For further details, please read the instruction manual of your camera.
Switch the focusing mode switch of the camera to manual focusing mode (MF) in case
of Nikon, Sony or Pentax. In case of a Canon camera, switch the AF/MF switch won
the lens to MF. (Fig. 6) Focus manually rotating the focusing ring while viewing
through the camera’s viewfinder. The main subject in the viewfinder will be sharp when
the lens is focused correctly.
폷 Even in the MF mode, turning focusing ring 8while pressing the shutter button halfway the
focus aid function lamp lights up when the picture is in focus.
폷At infinity, make sure the image in the viewfinder appears sharp. The infinity position on A13,
A14, A16 & A18 is made with certain allowances to insure proper focus under a variety of
conditions.
폷The focusing ring 8of the A15 does not have a distance scale.
폷For further details, please read the instruction manual of your camera.
Rotate zooming ring 9of the lens while viewing through the camera’s viewfinder and
compose your image at the chosen focal length.
Model A14, A16 & A18 is equipped with zoom lock switch mechanism which prevent
lens barrel from extendting towards long focal length, while hanging around the neck.
Activate the switch at the shortest setting to stop the lens barrels from rotating and
extending.
쐽How to activate the zoom lock switch mechanism
1) Locking: Set the zoom ring on the lens to the shortest position. Move the zoom
lock switch =toward the camera for locking the zooming ring 9. The lens
barrel is locked in position when the portion beneath “Lock” is shown in red and
the lens barrel does not rotate or extend by its own weight.
2) Releasing: Push the zoom lock switch =up. The zooming ring 9is now
released and can be rotated.
폷 Zoom lock switch can not be activated unless the lens is set to the shortest
position. Do not force the lock switch or try to rotate the zooming ring while
locked, doing so may damage the lens.
폷 The zoom lock mechanism is made to prevent the lens barrel from extending
while carried around the neck. When not locked and the zoom lens may change its
focal length during a long exposure used in a low or high angle position.
폷 The lens can be used at the shortest setting for picture taking even while in the focused
position.
Please follow the instruction manual of your camera.
A bayonet-type lens hood is provided as standard equipment. We recommend shooting
with the hood attached whenever possible as the lens hood eliminates stray light which
is harmful to the picture. However, please be aware of the precautions written below
when your camera is equipped with a built-in flash.
쐽Attaching the Lens Hood (Ref. Figs. 7& 8)
Align the index mark 2on the hood with the corresponding index mark 5or the top
of the index line of the distance scale) on the lens. Press the hood lightly onto the
hood attaching bayonet ring (Fig. 7, No. 1) and then rotate it clockwise to secure
(Fig. 7, No. 2). The lens hood will be securely held as the mark “TAMRON 쑗”
comes to the top (Fig. 8, No. 3). When attaching the lens hood, hold the focusing
and zoom control rings so that they are not rotated unintentionally.
폷 Pay particular attention to align the hood attaching indexes when using zoom lenses
including wide-angle (e.i. 35 mm or wider) settings.
Improper attachment of a hood for wide-angle zoom lens may cause large shadowed
areas in your pictures.
쐽Stowing lens hood on the lens (Ref. Fig. 9)
1) Reverse the lens hood. Point the lens toward to opening, then align the hood
attachment mark on the lens with the (TAMRON 쑗) alignment on the hood 3.
2) Turn the hood clockwise until it alignment mark (•) is at the top to set it. (Fig. 9, 2)
When attaching and detaching the lens hood for the A15, please follow these instructions.
폷When attaching and detaching the lens hood for the A15, be sure to set your camera or
lens to MF mode. The hood attaching bayonet ring 5turns as the focusing ring 8
turns. Trying to attach the lens hood when the camera or lens is set in the AF mode
forces the focusing ring 8to turn and will damage the camera or lens.
쐽Attaching the Lens Hood (Ref. Figs. 0& -)
1) For Nikon or Sony cameras, set the camera to the MF mode. For Canon cameras,
set the AF-MF switch won the lens to the MF position.
2) Engage the bayonet tab on the lens hood rwith the bayonet tab on the lens t.
3) Secure the focusing ring 8from moving while turning the lens hood 1clock
wise until the hood clicks into the lock position.
쐽Detaching the lens hood
1) For Nikon and Sony cameras, set the camera to the MF mode. For Canon cameras, set
the AF-MF switch won the lens to the MF position.
2) Secure the focusing ring 8from moving while turning the lens hood 1counter-clock
wise until the hood is released from the lens.
쐽Storing the lens hood (Ref. Fig. =)
The lens hood can be reverse-mounted for easy storage.
1) For Nikon or Sony cameras, set the camera to the MF mode. For Canon cameras,
set the AF-MF switch wto the MF position.
2) Engage the hood attachment bayonet ring 5with the hood attaching tabs on the
hood.
3) Turn the lens hood 1clock-wise until it clicks into the locking position.
쐽Detaching the stored lens hood (Ref. Figs. q, w& e)
1) For Nikon or Sony cameras, set the camera to the MF mode. For Canon cameras,
set the AF-MF switch wto the MF position.
2) Set the zoom index mark -at 200mm on the zooming ring 9.
3) Turn the lens hood 1counter-clockwise to extend the focusing ring 8.
4) Hold the extended portion of the focusing ring 8to secure from moving while
turning the hood 1counter-clock wise until the hood is released.
폷The optical design for Di II takes into consideration the various features of digital
single reflex cameras. However, due to the configuration of the digital single reflex
cameras, even when the autofocus accuracy is within specifi-cations, the focal point
may be a little forward or behind the optimum point when shooting with auto focus
under some conditions.
폷The image circles of Di II lenses are designed to match the digital SLR cameras using
the image sensors equivalent to APS-C (approx. 15.5҂23.2mm). Do not use Di II
lenses with cameras using image sensors larger than APS-C. Using Di II lenses with
such cameras may cause vignetting on the image.
폷(A13, A14, A16, A18) employ an internal focusing (IF) system. Because of the
characteristics of this optical design, the angles of view at distances other than
infinity are wider than that of the lenses applying an ordinary focusing system.
폷When the built-in flash on the camera is used, adverse photographic phenomena such
as corner illumination fall-off or vignetting at the bottom part of the image may be
observed, especially in wide angle ranges. This is due to the inherent limitation of the
coverage of the built-in flash,and/or the relative position of the flash to the edge of
the lens barrel which causes shadows on the image. It is strongly recommended to
use a suitable separate flash unit provided by the camera manufacturer for all flash
photography.
For further details, please read the “built-in flash” article on the instruction manual of
your camera.
폷When using the lens in the telephoto focal range, please be careful with the camera
shake. Effective way to avoid the camera shake is using an ISO setting of higher
numbers. Using a tripod or monopod is also effective.
폷When set on AF mode, interfering with focusing ring may cause serious damage to the
lens mechanism.
폷Certain camera models may indicate the maximum and minimum aperture values of
the lens appropriate numbers. This is inherent to the design of the camera and not an
indication of an error.
폷When using a special filter such as a PL filter on the A16, use low-profile filter. The
thick rim of a PL filter may cause vignetting.
폷Avoid touching the glass element surface. Use a photographic lens cloth or blower to
remove dust from the lens element surface. When not using the lens, always place a
lens cap on it for protection.
폷Use a lens cleaning tissue or lint cloth with a drop of cleaning solution to remove
fingerprints or dirt on the glass lens surface with a rotary motion from the center to
the edge.
폷Use a silicon cloth to clean your lens barrel only.
폷Mildew is an enemy of your lens. Clean the lens after shooting near water or in any
humid place. Store your lens in a clean, cool and dry place.When storing the lens in
an lens case, store it with commercially available drying agent such as silicagel, and
change the agent occasionally. If you find mildew on your lens, consult an authorized
repair shop or nearby photo-graphic store.
폷Do not touch the lens-camera interface contacts since dust, dirt and/or stains may
cause a contact failure between the lens and camera.
폷When using your equipment [camera(s) and lens(es)] in an environment where the
temperature changes from one extreme to the other, make sure to put your
equipment temporarily in a case or a plastic bag for a length of time in order for the
equipment to go through a gradual temperature shift.
This will reduce potential equipment trouble.
ENGLISH
NOMENCLATURE (Refer to Fig. 1, if not specified)
SPECIFICATIONS
ATTACHING AND REMOVING THE LENS (A13, A14, A15, A16, A18)
FOCUSING (Autofocus) (Ref. Figs. 1& 2) (A13, A14, A15, A16, A18)
FOCUSING (Manual Focus) (Ref. Figs. 2) (A13, A14, A15, A16, A18)
ZOOMING (Ref. Fig. 2) (A13, A14, A15, A16, A18) PRECAUTIONS IN SHOOTING
TO ENSURE LONG-TERM SATISFACTION
ZOOM LOCK SWITCH (Ref. Figs. 3& 4) (A14, A16, A18)
LENS APERTURE AND AE MODE (A13, A14, A15, A16, A18)
LENS HOOD (Ref. Figs. 1, 7, 8& 9) (A13, A14, A16, A18)
LENS HOOD (Ref. Figs. 1, 0to e) (A15)