TANDBERG MPS 800 User manual

MPS 800 Gateway Kit Installation
1
Use the rear panel power switch to
switch off the MPS power.
2
Insert the new Gateway board
into the rst available slot in the front panel.
3
Connect a LAN cable from the Ethernet socket
of the board just installed and to your network.
4
Turn the MPS power back on.
D13903.02
5
The system is ready for conguration once the
Power and the Active LED are green and the initial
conguration menu appears on the LCD.
Send the MPS serial No. to your TANDBERG
Representative. You will then receive the
option key needed to activate the new
boards.
Access the TANDBERG MPS by entering
the IP-address of the Gateway Board in
a standard web browser to complete the
conguration of the new Gateway Board and
upload the new Gateway option keys. See the
below Fig. and the MPS User Manual for more
information.
MPS Serial No. Label
6
Click the Restart button.
7

"!3%4
53"
#/-
!"4 234
(/,$
#05 &!),
53"
3%2)!,
%.%4 %.%4 #/- +"-3
MPS 200 Gateway Kit Installation
1
Use the rear panel power switch to
switch off the MPS power.
2
3Connect a LAN
cable from the
Ethernet socket
of the board
just installed
and to your
network.
4
Turn the MPS power back on.
"!3%4
53"
#/-
!"4 234
(/,$
#05 &!),
53"
3%2)!,
%.%4 %.%4 #/- +"-3
"!3%4
53"
#/-
!"4 234
(/,$
#05 &!),
53"
3%2)!,
%.%4 %.%4 #/- +"-3
"!3%4
53"
#/-
!"4 234
(/,$
#05 &!),
53"
3%2)!,
%.%4 %.%4 #/- +"-3
IP
"!3%4
53"
#/-
!"4 234
(/,$
#05 &!),
53"
3%2)!,
%.%4 %.%4 #/- +"-3
Insert the new Gateway board into the rst
available slot in the front panel.
D13903.02
65
The system is ready for conguration once the
Power and the Active LED are green and the initial
conguration menu appears on the LCD.
Send the MPS serial No. to your TANDBERG
Representative. You will then receive the option key
needed to activate the new boards.
Access the TANDBERG MPS by entering the IP-
address of the Gateway Board in a standard web
browser to complete the conguration of the new
Gateway Board and upload the new Gateway option
keys. See the below Fig. and the MPS User Manual
for more information.
7Click the Restart button.
MPS Serial No. Label
"!3%4
53"
#/-
!"4 234
(/,$
#05 &!),
53"
3%2)!,
%.%4 %.%4 #/- +"-3
"!3%4
53"
#/-
!"4 234
(/,$
#05 &!),
53"
3%2)!,
%.%4 %.%4 #/- +"-3