The SuperTweeter is designed to provide the extended high frequency
response demanded by modern programme material and sources.
It not only resolves fine detail of high frequency notes but also
effectively enhances the listening experience even at lower frequencies.
Extending the frequency response by two octaves corrects time and
phase response within the bandwidth of normal human hearing.
Music contains transient information and rich harmonics beyond the
range of human hearing for pure tones. Even low frequency notes
have leading edge transients reaching 30kHz. By operating between
the roll-off point of your existing speakers and 54kHz, the SuperTweeter
will accurately reproduce the leading edge of individual notes allowing
the listener to experience the entire bandwidth information of
PRESTIGE ST200 SUPERTWEETER
instruments. The SuperTweeter provides an increased
immediacy, airiness and impact - making music
sound more natural and true to life.
Although initially conceived to complement the current
Tannoy Prestige HE range, from Stirling up to
Westminster Royal, it will also find application with
many earlier Tannoy classic designs; previous Prestige
models, HPD, Monitor Gold or Monitor Silver for
example. Adjustments are provided for crossover
frequency and level.
The Tannoy Dual Concentric™ will still provide the
heart of the musical information as a coherent point
source. Extreme high frequencies can then be
supplemented by the SuperTweeter to provide
incredible wideband detail.
6483 0675
Recommended amplifier power
Power rating to DIN IEC 268
PERFORMANCE
Up to 250 Watts
135 Watts RMS
550 Watts Peak
Maximum sensitivity (2.83v @ 1m)
Nominal impedance
Frequency response (-6dB)
Driver type
95dB
8 ohms
To 54kHz, usable output (-18dB) to 100kHz
25mm 25 micron titanium dome, 24
carat vapour deposited gold finish with
neodymium magnet
3rd order compensated high pass
Weight kg (lbs)
Finish
6.5 (14.3)
Oiled solid Walnut
Crossover type
14, 16, or 18kHz adjustable
Crossover frequency
89dB, 90.5dB, 92dB, 93.5dB, 95dBLevel adjustment
150 (6) diameterDimensions mm (inches)
Features: High stiffness titanium dome to minimise effects of
dome break-up and extend frequency response • Copper clad
aluminium voice coil on aluminium former for high power handling
• Neodymium magnet system also extends frequency response
by minimising eddy current losses in voice coil • Provision for
driver magnet system earthing, to avoid interference and information
masking caused by radio interference • High purity (99.999%)
solid silver internal wiring, PTFE coated dielectric • Gold plated
terminals, adjustment screws and circuit board for high signal
transparency • Radio Frequency quality inductors in crossover for
excellent high frequency characteristics • Non-Inductive Planar
Thick Film resistors on ceramic substrates, to avoid loss associated
with wirewound types • High quality polycarbonate film capacitors,
selected for superior high frequency performance
Tannoy Ltd. North Lanarkshire, ML5 4TF Scotland Tel: 01236 420199 Fax: 01236 428230
Tannoy/TGI North America, 300 Gage Avenue, Kitchener, Ontario, Canada N2M 2C8
Tel: 519 745 1158 Fax: 519 745 2364
Tannoy Nederland BV. Anthonetta Kuijlstraat 19, 3066 GS Rotterdam, Nederlands
Tel: 010 2860555 Fax: 010 2860431
www.tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change.
Colours represented here are as accurate as the printing process allows.
TECHNICAL SPECIFICATION
