TaoTronics TT-BA08 User manual

EUROPE
E-mail:
[email protected](UK)
[email protected](DE)
[email protected](FR)
[email protected](ES)
[email protected](IT)
NORTH AMERICA
E-mail :
[email protected](US)
[email protected](CA)
Tel : [phone] (Monday-Friday: 9:00 – 17:00 PST)
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
MANUFACTURER
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-manual
ASIA PACIFIC
E-mail: [email protected](JP)
JPImporter:株式会社SUNVALLEYJAPAN
Address:〒104-0032東京都中央区八丁堀３丁目18-6PMO京橋東９F
Model:TT-BA08
TaoTronics Wireless 2-in-1 Adapter
User Guide
MADE IN CHINA
03-19-2020
TT-BA08_V2.6
www.taotronics.com

Package Contents
TaoTronics Wireless2-in-1 Adapter
(Model: TT-BA08)
3.5mm Audio Cable
3.5mm Female to 2 RCA Male Cable
USB Charging Cable
User Guide
TaoTronics Wireless 2-in-1 Adapter
User Guide
Model:TT-BA08
US UK CA DE
Lieferumfang
TaoTronics kabelloser 2-in-1 Adapter
(Modell: TT-BA08)
3,5 mm Audiokabel
3,5 mm Klinke auf 2 RCA Kabel
USB-Ladekabel
Bedienungsanleitung
Contenu de la Boîte
1 x Adaptateur Sans-fil 2-en-1
TaoTronics (TT-BA08)
Câble Audio 3.5mm
Câble 3.5mm Femelle vers
2RCA Mâle
Câble de Charge USB
Guide d’Utilisation
ES
Contenido del paquete
Adaptador inalámbrico 2-en-1 de
TaoTronics modelo (TT-BA08)
Cable de audio de 3,5 mm
Cable macho 3.5mm hembra
a 2 RCA
Cable de carga USB
Guía del usuario
Contenuto della Confezione
TaoTronics Adattatore
Wireless 2-in-1 (Modello: TT-BA08)
Cavo Audio da 3.5mm
Cavo Maschio 3.5mm a
2 RCA Maschio
Cavo di Ricarica USB
Guida Utente
JP
セ ット 内 容
TaoTronicsBluetoothトランスミッタ
ー＆レシーバー(TT-BA08)
3.5mmオーディオケーブル
3.5mmメス2RCAオス変換ケーブル
USB充電ケーブル
取扱説明書
FR
IT
Package Contents
TaoTronics Wireless2-in-1 Adapter
(Model: TT-BA08)
3.5mm Audio Cable
3.5mm Female to 2 RCA Male Cable
USB Charging Cable
User Guide
TaoTronics Wireless 2-in-1 Adapter
User Guide
Model:TT-BA08
US UK CA DE
Lieferumfang
TaoTronics kabelloser 2-in-1 Adapter
(Modell: TT-BA08)
3,5 mm Audiokabel
3,5 mm Klinke auf 2 RCA Kabel
USB-Ladekabel
Bedienungsanleitung
Contenu de la Boîte
1 x Adaptateur Sans-fil 2-en-1
TaoTronics (TT-BA08)
Câble Audio 3.5mm
Câble 3.5mm Femelle vers
2RCA Mâle
Câble de Charge USB
Guide d’Utilisation
ES
Contenido del paquete
Adaptador inalámbrico 2-en-1 de
TaoTronics modelo (TT-BA08)
Cable de audio de 3,5 mm
Cable macho 3.5mm hembra
a 2 RCA
Cable de carga USB
Guía del usuario
Contenuto della Confezione
TaoTronics Adattatore
Wireless 2-in-1 (Modello: TT-BA08)
Cavo Audio da 3.5mm
Cavo Maschio 3.5mm a
2 RCA Maschio
Cavo di Ricarica USB
Guida Utente
JP
セ ット 内 容
TaoTronicsBluetoothトランスミッタ
ー＆レシーバー(TT-BA08)
3.5mmオーディオケーブル
3.5mmメス2RCAオス変換ケーブル
USB充電ケーブル
取扱説明書
FR
IT

①Volume - / Previous Track
②Volume + / Next Track
③Transmitter (TX) /
Receiver (RX) Mode Switch
④LED Indicator
⑤Power Button
⑥Charging Port
⑦3.5mm Audio Port
Package Contents
US UK CA DE
Lieferumfang
Contenu de la Boîte
ES
Contenido del paquete
Contenuto della Confezione
JP
セ ット 内 容
FR
IT
① Lautstärke - / vorheriger Titel
② Lautstärke + / nächster Titel
③ Sender (TX) / Empfänger
(RX) Modusumschalter
④ LED-Anzeige
⑤ Einschalttaste
⑥ Ladeanschluss
⑦ 3.5mm Audioanschluss
① Volume - / Piste précédente
② Volume+ / Piste suivante
③ Bascule de Mode Transmetteur
(TX) / Récepteur (RX)
④ Voyant à LED
⑤ Bouton d’Alimentation
⑥ Port de charge
⑦ Port Audio 3.5mm
① Volumen - / pista anterior
② Volumen + / pista siguiente
③ Transmisor (TX) / Conmutador
de modo receptor (RX)
④ Indicador LED
⑤ Botón de encendido
⑥ Puerto de carga
⑦ Puerto de audio de 3,5 mm
① Tasto volume - / traccia precedente
② Tasto volume + / traccia successiva
③ Modalità Trasmettitore
④ LED di Notifica
⑤ Tasto di Accensione/Spegnimento
⑥ Porta di Ricarica Micro USB
⑦ Porta Audio 3.5 mm
① ボリューム-/曲戻し
② ボリューム+/曲送り
③ トランスミッター(TX)/レシーバー
(RX)モード切替スイッチ
④ LEDインジケーター
⑤ 電源ボタン
⑥ 充電ポート
⑦ 3.5mmオーディオポート
①Volume - / Previous Track
②Volume + / Next Track
③Transmitter (TX) /
Receiver (RX) Mode Switch
④LED Indicator
⑤Power Button
⑥Charging Port
⑦3.5mm Audio Port
Package Contents
US UK CA DE
Lieferumfang
Contenu de la Boîte
ES
Contenido del paquete
Contenuto della Confezione
JP
セ ット 内 容
FR
IT
① Lautstärke - / vorheriger Titel
② Lautstärke + / nächster Titel
③ Sender (TX) / Empfänger
(RX) Modusumschalter
④ LED-Anzeige
⑤ Einschalttaste
⑥ Ladeanschluss
⑦ 3.5mm Audioanschluss
① Volume - / Piste précédente
② Volume+ / Piste suivante
③ Bascule de Mode Transmetteur
(TX) / Récepteur (RX)
④ Voyant à LED
⑤ Bouton d’Alimentation
⑥ Port de charge
⑦ Port Audio 3.5mm
① Volumen - / pista anterior
② Volumen + / pista siguiente
③ Transmisor (TX) / Conmutador
de modo receptor (RX)
④ Indicador LED
⑤ Botón de encendido
⑥ Puerto de carga
⑦ Puerto de audio de 3,5 mm
① Tasto volume - / traccia precedente
② Tasto volume + / traccia successiva
③ Modalità Trasmettitore
④ LED di Notifica
⑤ Tasto di Accensione/Spegnimento
⑥ Porta di Ricarica Micro USB
⑦ Porta Audio 3.5 mm
① ボリューム-/曲戻し
② ボリューム+/曲送り
③ トランスミッター(TX)/レシーバー
(RX)モード切替スイッチ
④ LEDインジケーター
⑤ 電源ボタン
⑥ 充電ポート
⑦ 3.5mmオーディオポート

Thank you for choosing the TaoTronics TT-BA08
Wireless 2-in-1 Adapter. Please read this guide
carefully and keep it in a safe place for future
reference. If you need any further assistance,
please contact our customer support team at
[email protected].
US UK CA
Control Functions
Function
Power On / Off
Pairing
Mode Switch
Play / Pause
Volume + / -
Next / Previous
Track
Operation
Press and hold the Power Button
for 3 seconds
When powered on, press the Power
Button twice to start pairing
Slide the Mode Switch to and
from TX and RX
In RX mode, press the Power Button
once to play / pause music
In RX mode, press and hold the
Volume + / - Button
In RX mode, press the
Volume + / - Button once
Note:
The mode can only be successfully switched after the adapter is
turned off for 5 seconds. After the switch, the pairing history of the
devices will be cleared.
01/02

Thank you for choosing the TaoTronics TT-BA08
Wireless 2-in-1 Adapter. Please read this guide
carefully and keep it in a safe place for future
reference. If you need any further assistance,
please contact our customer support team at
[email protected].
US UK CA
Control Functions
Function
Power On / Off
Pairing
Mode Switch
Play / Pause
Volume + / -
Next / Previous
Track
Operation
Press and hold the Power Button
for 3 seconds
When powered on, press the Power
Button twice to start pairing
Slide the Mode Switch to and
from TX and RX
In RX mode, press the Power Button
once to play / pause music
In RX mode, press and hold the
Volume + / - Button
In RX mode, press the
Volume + / - Button once
Note:
The mode can only be successfully switched after the adapter is
turned off for 5 seconds. After the switch, the pairing history of the
devices will be cleared.
01/02

How to Use
Charging
1. Use a micro USB cable and connect the adapter to any active
USB port.
2. The LED indicator will turn red when charging. It will automatical-
ly turn off when the device is fully charged.
Note:
• We recommend charging the unit for at least 2 hours before using
it for the first time.
Pairing
Pair in TX mode:
1. Set the TT-BA08 to TX mode and connect it to your Non-
Bluetooth® audio transmitting device.
2. Place your Bluetooth® audio receiving device, like earphones /
speakers, within a 3 feet / 1 meter range and set it to pairing
mode.
3. Turn on the TT-BA08 and tap the power button twice to enter pairing
mode. After approximately 10 seconds, pairing will complete.
If the TT-BA08 cannot pair with your Bluetooth device, please turn
the device off for 5 seconds and then switch it from RX mode to TX
mode. Turn the device off again and then after 5 seconds, switch it
back to RX mode.
LED Indicators
LED Indicator
Solid Red LED
LED Off
Flashing Red
and Blue
Flashing Red
Solid Blue LED
Flashing Blue
Status
Charging
Fully charged
Pairing in TX / RX mode
Low battery
Successfully paired
Powered on but not paired
with Bluetooth®devices
03/04

How to Use
Charging
1. Use a micro USB cable and connect the adapter to any active
USB port.
2. The LED indicator will turn red when charging. It will automatical-
ly turn off when the device is fully charged.
Note:
• We recommend charging the unit for at least 2 hours before using
it for the first time.
Pairing
Pair in TX mode:
1. Set the TT-BA08 to TX mode and connect it to your Non-
Bluetooth® audio transmitting device.
2. Place your Bluetooth® audio receiving device, like earphones /
speakers, within a 3 feet / 1 meter range and set it to pairing
mode.
3. Turn on the TT-BA08 and tap the power button twice to enter pairing
mode. After approximately 10 seconds, pairing will complete.
If the TT-BA08 cannot pair with your Bluetooth device, please turn
the device off for 5 seconds and then switch it from RX mode to TX
mode. Turn the device off again and then after 5 seconds, switch it
back to RX mode.
LED Indicators
LED Indicator
Solid Red LED
LED Off
Flashing Red
and Blue
Flashing Red
Solid Blue LED
Flashing Blue
Status
Charging
Fully charged
Pairing in TX / RX mode
Low battery
Successfully paired
Powered on but not paired
with Bluetooth®devices
03/04

Pair with two devices at the same time
In TX mode:
In TX mode, the adapter is able to pair with two Bluetooth®stereo
earphones/speakers at the same time.
1. Follow the previous instructions in the “Pairing” section to pair
the TT-BA08 with your first device.
2. Turn off the Bluetooth®function on your first device, tap the Power
Button twice to pair and connect to your second device.
3. Turn on the Bluetooth®function on your first device. In
approximately 10 seconds, the first device will automatically
connect in.
Note:
• When you pair with two devices, both can play music at the same
time.
• The adapter will automatically re-pair when powered on.
In RX mode:
In RX mode, the adapter is able to pair with two Bluetooth®devices
at the same time.
1. Follow previous instructions in the “Pairing” section to pair the
05/06
Pair in RX mode:
1. Set the TT-BA08 to RX mode and connect it to your non-Blue-
tooth®audio receiving device.
2. Turn on the TT-BA08 and tap the power button twice to enter
pairing mode.
3. Activate the Bluetooth®function on your transmitting device –
phone / tablet, and search for the nearby Bluetooth®devices.
4. Find “TaoTronics TT-BA08” in the search results and tap on it to
connect. Once connected, the LED indicator will turn solid blue.
Note:
• The adapter will enter pairing mode automatically when powered
on for the first time.
• The original pairing memory will be cleared after a mode switch. It
will automatically start pairing each time it’s powered on.
• The adapter can remember previously paired devices and will
attempt to pair with devices automatically, without going into pairing
mode.

Pair with two devices at the same time
In TX mode:
In TX mode, the adapter is able to pair with two Bluetooth®stereo
earphones/speakers at the same time.
1. Follow the previous instructions in the “Pairing” section to pair
the TT-BA08 with your first device.
2. Turn off the Bluetooth®function on your first device, tap the Power
Button twice to pair and connect to your second device.
3. Turn on the Bluetooth®function on your first device. In
approximately 10 seconds, the first device will automatically
connect in.
Note:
• When you pair with two devices, both can play music at the same
time.
• The adapter will automatically re-pair when powered on.
In RX mode:
In RX mode, the adapter is able to pair with two Bluetooth®devices
at the same time.
1. Follow previous instructions in the “Pairing” section to pair the
05/06
Pair in RX mode:
1. Set the TT-BA08 to RX mode and connect it to your non-Blue-
tooth®audio receiving device.
2. Turn on the TT-BA08 and tap the power button twice to enter
pairing mode.
3. Activate the Bluetooth®function on your transmitting device –
phone / tablet, and search for the nearby Bluetooth®devices.
4. Find “TaoTronics TT-BA08” in the search results and tap on it to
connect. Once connected, the LED indicator will turn solid blue.
Note:
• The adapter will enter pairing mode automatically when powered
on for the first time.
• The original pairing memory will be cleared after a mode switch. It
will automatically start pairing each time it’s powered on.
• The adapter can remember previously paired devices and will
attempt to pair with devices automatically, without going into pairing
mode.

TT-BA08 with your first device. Disable the Bluetooth®function on
your first device. Tap the Power Button twice to pair with the
second device.
2. Turn on the Bluetooth®of the first device, now TT-BA08 adapter is
successfully paired with both devices.
Note:
• Only one device can play music at any time. You have to stop the
music on one device to play on the other.
• The adapter will automatically re-pair when powered on.
07/08
Vielen Dank, dass Sie sich für den TaoTronics TT-BA08
kabellosen 2-in-1 Adapter entschieden haben. Bitte lesen
Sie diese Anleitung aufmerksam und bewahren Sie sie zum
späteren Nachlesen auf. Falls Sie Fragen haben,
kontaktieren Sie unseren Kundendienst bitte per E-Mail
unter [e-mail].
DE

EUROPE
E-mail:
[email protected](UK)
[email protected](DE)
[email protected](FR)
[email protected](ES)
[email protected](IT)
NORTH AMERICA
E-mail :
[email protected](US)
[email protected](CA)
Tel : [phone] (Monday-Friday: 9:00 – 17:00 PST)
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
MANUFACTURER
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-manual
ASIA PACIFIC
E-mail: [email protected](JP)
JPImporter:株式会社SUNVALLEYJAPAN
Address:〒104-0032東京都中央区八丁堀３丁目18-6PMO京橋東９F
Model:TT-BA08
TaoTronics Wireless 2-in-1 Adapter
User Guide
MADE IN CHINA
03-19-2020
TT-BA08_V2.6
www.taotronics.com