Target windham WNKTNCRTBL User manual

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
>>
windham
kitchen cart
assembly instructions
style # WNKTNCRTBL (teal)
dpci # 249-04-2296
tcin # 50760251
style # WNKTNCRTGY (gray)
dpci # 249-04-2297
tcin # 50760252
style # WNKTNCRTBK (black)
dpci # 249-04-2299
tcin # 50760254
style # WNKTNCRTWH (shell)
dpci # 249-04-2300
tcin # 50760255
style # WNKTNCRTOV (overcast)
dpci # 249-04-4740
tcin # 53321661

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-17
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 20
wooden dowel
(H2) x 16
cam bolt
(H3) x 16
cam
(H4) x 2
pan head screw
(H5) x 8
1” at head screw
(H6) x 8
at head screw
(H7) x 4
bolt
(H8) x 2
knob
(H9) x 2
knob bolt
(H10) x 1
magnet
(H11) x 4
shelf support
(H12) x 1
allen wrench
(H13) x 2
caster
(H14) x 2
locking caster
(H15) x 2
hook

5
exploded diagram
ITEM DESCRIPTION QUANTITY
1 top panel 1
2 left side frame 1
3 right side frame 1
4 bottom panel 1
5 back panel 1
6 front rail 1
7 adjustable shelf 1
8 towel arm 2
9 towel bar 1
10 door 1
11 drawer face 1
12 left drawer side 1
13 right drawer side 1
14 drawer back 1
15 drawer bottom 1

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
1. 2. 3.
4. 5.

step 1: attach back panel to bottom panel
(H1) x 2
wooden dowel
(H2) x 1
cam bolt
(H3) x 1
cam
1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
7

step 2: attach magnet to front rail and then attach to left side frame
(H1) x 6
wooden dowel
(H2) x 5
cam bolt
(H3) x 5
cam
(H10) x 1
magnet
(H4) x 2
pan head screw
2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
8
nished edge

step 3: prepare right side frame and then attach to towel arms and bar
(H2) x 5
cam bolt
(H7) x 4
bolt
(H12) x 1
allen wrench
3.1. Screw-In cam bolts must be screwed down ush.
3.2. Align bolts with pre-drilled holes.
3.3. Do not over tighten bolts.
9
(H2) x 5
cam bolt
(H7) x 4
bolt
(H12) x 1
allen wrench

step 4: attach right side frame
(H1) x 6
wooden dowel
(H3) x 5
cam
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
10
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

step 5: attach casters
(H13) x 2
caster
(H14) x 2
locking caster
5.1. Gently press casters into place.
11
H14
H14

12
step 6: attach top panel
(H1) x 6
wooden dowel
(H2) x 5
cam bolt
(H3) x 5
cam
6.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
6.2. Screw-In cam bolts must be screwed down ush.
6.3. Refer to page 6 for instructions on how to use the cam lock system.

13
step 7: attach door and knob
(H8) x 1
knob
(H9) x 1
knob bolt
(H6) x 4
small at
head screw
7.1. Align bolts with pre-drilled holes.
7.2. Align screws with pre-drilled holes.
7.3. Do not over tighten bolts.
7.4. Do not over tighten screws.

14
step 8: install adjustable shelf
(H11) x 4
shelf support
8.1. Insert shelf supports into desired hole. Di󰀨erent holes accommodate di󰀨erent shelf heights.
8.2. Angle shelf to t between the rails and set on top of shelf supports.

15
step 9: attach drawer face, sides, back and drawer bottom
(H5) x 8
1” at head screw
9.1. Align screws with pre-drilled holes.
9.2. Do not over tighten screws.

step 10: attach hooks
(H6) x 4
small at
head screw
(H15) x 2
hook
10.1. Align screws with pre-drilled holes.
10.2. Do not over tighten screws.
16
back panel

step 11: attach knob and install drawer
(H8) x 1
knob
(H9) x 1
knob bolt
11.1. Align bolt with pre-drilled hole.
11.2. Do not over tighten bolt.
17

1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Use of hot pads/coasters are recommended to protect the surface from heat/water. Clean with mild soap
and water and dry with towel.
3. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
18
50 lbs.
25 lbs. per drawer
35 lbs. per shelf
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.