Tascam CD-160 Guide

Technical Documentation
CD-160
TASCAM's CD-160 is a cost-effective, rack mountable
CD player. The Auto Cue function will set the CD-160
at the "first audio" in a track, offering faster start
time on tracks with longer lead-ins. Pitch control is
standard, allowing minor tuning adjustment or a
bump in the feel of the track. Also, a +10 track
increment saves time when trying to locate high
track numbers. The CD-160 comes with a wireless
remote.
7733 Telegraph Road • Montebello, CA 90640 • [phone] • http://www.tascamcontractor.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
Page 1 of 2
CD-160_TECHDOC.pdf
092602
• 2-U Rack Mountable CD Player
• Fast Track Access Keypad
• ±6% Pitch Control with Clear On/Off Switch
• Headphone Jack with Level Control
• Auto Cue Function Locates Track's "First Audio"
• Unbalanced RCA Analog Output
• Digital Coaxial Output
• Program Play and Shuffle Play Modes
PRODUCT OVERVIEW
The CD-160 CD player is a simple, cost effective CD player
capable of handling most installations, and offering advanced
features like pitch control and auto cue.
Mobile PA Systems (Schools, Small Bands, etc.)
School systems often need to move between several locations
in the school for various functions - the pep rally in the gym,
the talent show in the theater, the staff meeting in the teacher's
lounge, etc. These systems simply need a rack mounted CD
player for portability, and will need to be durable enough to
withstand the travel. Full production CD players are not
required in these situations.
Bands face a similar problem when trying to have CDs playing
between sets, or even during set-up and tear down. Again,
the fancy feature set is not required. All that is needed is the
durable reliability that TASCAM is known for.
The CD-160 offers a cost effective solution to these markets
without dropping in all sorts of extra features that might cause
the user to make a mistake. It's all about pure and simple
reliability.
Fixed Installations (Lecture Halls, Board Rooms, etc.)
Whether you're setting up a player for a board room, lecture
halls, dance studios, or small theaters, often what is required
is a simple playback device. Extra features will often go
unused in these environments, and the CD-160 offers a
familiar player to these users.
In the case of dance or music instructional facilities, the pitch
control may come in handy for changing the feel of a track, or
taking it to a different key. Plus, the keypad allows faster
track access which comes in handy when dealing with sound
cues or multiple backing tracks.
APPLICATIONS
Performance Specifications:
Audio Channels:
Quantization
Sampling Frequency:
Oversampling:
Auto Cue Level:
Analog Output:
Nominal Output Level:
Maximum Output Level:
Output Impedance:
Digital Output:
Headphone Output:
Pitch Control:
Frequency Response:
Total Harmonic Distortion:
Signal to Noise Ratio:
Channel Separation:
General:
Standard Equipment:
Power Requirements:
Power Consumption:
Dimensions:
Weight:
2 channel stereo
16 bit linear
44.1kHz
8x
-60dB
Unbalanced RCA
-10dBv, 10kOhms
+6dBv, 2Vrms
2.5kOhms
SPDIF Coaxial
11mW at max
(32 Ohm Load Impedance)
±6% (in 1% steps)
20Hz-20kHz ±1.5db
<0.02%
>85dB (1kHz)
>80dB (1kHz)
RC-150C
(Wireless Remote)
120VAC, 60Hz
(US/Canada Model)
230VAC, 50Hz
(Europe Model)
240VAC, 50Hz
(Australia Model)
9W
482 x 104 x 304 mm
19" x 4.1" x 11.9"
4.4Kg, 9.7 lbs
SPECIFICATIONS
The CD-160 is available at:

CD-160 Technical Documentation
7733 Telegraph Road • Montebello, CA 90640 • [phone] • http://www.tascamcontractor.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
Page 2 of 2
FRONT PANEL, BACK PANEL & REMOTE
CD-160_TECHDOC.pdf
092602
The CD player shall be a single disc player
with a powered loading tray that can mount
in a standard 19" rack mount form.
Dimensions shall be 19" x 4.1" x 11.9"
(W x H x D).
Metric measurements: 482x104x304mm.
The CD player shall offer Program Play and
Shuffle Play. An Auto Cue function shall be
a selectable feature to trigger playback
from the first audio in a track, rather than
the track ID location.
Pitch control shall be provided to
approximately ±6%, and adjustable from
the front panel. A pitch control in/out
indicator shall be present on the front panel.
Analog outputs shall be provided on
unbalanced RCA connectors. An SPDIF output
shall be provided on a coaxial connector.
The CD player shall be controllable with a
TASCAM RC-150C wireless remote, which shall
offer access to all of the machine's major
functions.
The CD player shall be a TASCAM CD-160.
NOTE: This text is available in a standard text file on
TASCAM's Sound Contractor CD-ROM.
ARCHITECT'S SPECIFICATIONS