TBI DOG TRAINING COLLAR User manual

T
H
E
B
E
S
T
I
N
D
U
S
T
R
I
E
S
T
H
E
B
E
S
T
I
N
D
U
S
T
R
I
E
S
—
T
H
A
T
'
S
A
L
L
Y
O
U
N
E
E
D
DOG TRAINING
COLLAR
INSTRUCTION MANUAL

DOG TRAINING COLLAR MANUALDOG TRAINING COLLAR MANUAL
98
1
1
2
88
1
2
1
2
1
2
IMPORTANT SAFETY INFORMATION
WARNING:
Not for aggressive dogs. DO NOT USE this product if your dog is
aggressive or prone to aggressive behavior. Aggressive dogs can
cause severe injury and even death to their owner and others. If
you are unsure whether this product is appropriate for your dog,
consult your veterinarian or certified trainer. The Remote Training
Collar MUST be used on healthy dogs only. We recommend you to
take your dog to a veterinarian before using the collar if he is not in
good health.
CAUTION:
RISK OF INJURY. Please, read the following instructions carefully in
this guide. Proper collar fit is important. Because a loose collar may
cause inconsistent performance. A collar worn for too long or made
too tight on the pet’s neck may cause skin damage ranging from
redness to pressure ulcers (commonly known as bedsores).
 Avoid leaving the collar on the dog for more than 12
hours per day
 Try to reposition the collar on the pet’s neck every 1 to
2 hours
 Check the fit to prevent excessive pressure. Follow the
instructions in this manual
 Never contact a lead to the electronic collar. It will
cause excessive pressure on the contacts
 Wash the dog’s neck area and the contacts of the collar
weekly with a damp cloth
 Examine the contact area daily for signs of rash or
sores
 If a rash or sore is found, stop using the collar until the
skin has healed
 If the condition persists beyond 48 hours, see your
veterinarian
These steps will help keeping your pet safe and comfortable. Millions
of pets are comfortable while they wear stainless steel contacts.
Some pets are sensitive to contact pressure. You may find after
some time that your pet is very tolerant of the collar. If so, you may
relax some of these precautions. It is important to continue daily
checks of the contact area. If redness or sores are found, stop using
until the skin has fully healed.
Tips:
• Press Channel button for 3 seconds to turn on
the remote
• Press Channel button for 3 seconds to turn o
the remote
• It will turn o the LCD display in 2 minutes automatically
if there is no pressing
Power ON/OFF Button:
Press the button for 2 seconds
to turn on the receiver with a
vibration and press and hold
for 3s to turn o the receiver
with a beep.
Charging Port: Fully charge
will take around 2-3 hours.
LED Indicator:
LED Solid LED Blinking
System Running
/ Fully Charged
Pairing Mode
/ Charging / Low Battery
Antenna
Channel 01-99 level
Battery Status
Vibration Button
Beep Button
Shock Level UP
Shock Level DOWN
Shock Button
Vibration Level UP
Vibration Level DOWN
Channel Button
Charging Port
REMOTE

DOG TRAINING COLLAR MANUALDOG TRAINING COLLAR MANUAL
98
1
1
2
1
2
1
2
1
2
SETUP PROCEDURE:
1. Charge the remote and receiver
• Please, fully charge the Remote and Receiver before you use
the products
• Remote: Fully charged, The Red LED will become solid
• Receiver: Fully charged, the Red LED will become solid (The
LED will be blinking if Low Power)
• The charging time takes around 2 to 3 hours. LED indicator on
the Remote will be solid and LED indicator on receiver will be
blinking when charging
Tips:
• When the receiver is low power, the LED Indicator will
fast blink
• When the system is working or fully charged, the LED
Indicator will be solid
• The receiver will go to Power Saving mode after 30
seconds if no movement or transmitted signal is detected
2. Pairing and Test the remote and
Receiver (important)
1. Turn on the Remote Control,
and turn o the Receiver.
2. Press and Hold the receiver
Power On/O Button at
least 5 seconds, then you will
hear a Beep and the Red LED
is flashing. (You will have 5
seconds to pair the device).
3. Press the Vibration button within 5 seconds to finish the
pairing then you will hear a Beep.
To test if the Remote and Receiver are paired, press the Beep
button, the Receiver will beep every time you press the beep
button. If there is no Beep, then repeat the pairing process.
Tips:
You can choose Channel 1 or Channel 2 to pair the Remote
and Device. The system can pair 2 Receivers at the same
time. If you can not pair the device successfully, it may be
caused by signal interference. Please, change to another
location. The Remote will go to Sleep Mode if you don’t
use it for 2 minutes or more, and the Receiver will go
to Power Saving Mode if there is no movement for 30
seconds and the LED will be turned o. Any movement
on the Receiver will activate the collar and any button you
press on the Remote will activate the Remote.
Static Shock Test:
• Secure the included test Bulb Kit on
the Receiver Collar’s Contact Points
• Press the Shock button to test
the Shock Function
• The test Bulb will light up indicating
that the Static Shock Stimulation
works
• The higher the Static Shock Level is
the brighter the light should be
Vibration Test:
• Press the Vibration button to test the Vibration Function
• The Receiver Collar will vibrate indicating that the Vibration
Function works

DOG TRAINING COLLAR MANUALDOG TRAINING COLLAR MANUAL
1
2
Beeping Test:
• Press the Beeping button to test the Beeping Function
• The Receiver Collar will be beeping indicating that the
Beeping Function works
Note: the level of the Beeping mode can NOT be adjusted. Level
0 is set by default.
3. Fit the Collar Receiver
The proper fit and placement of the collar is important for
eective training. The contact points must have direct contact
with your pet’s skin on the underside of the neck.
To assure a proper fit. Please follow these steps:
• Make sure that the collar is turned O
• Have your pet standing comfortably on all four legs (Fig 3A)
• Place the collar receiver on your pet’s neck close to the ears
• Center the contact points underneath your pet’s neck to
touch the skin (Fig 3B)
• The collar should fit snugly yet loose enough to allow one
finger to fit between the strap and your pet’s neck (Fig 3C)
Tips:
• Sometimes you need to trim the hair around
the contact points to make sure that contact is
consistent
• DO NOT shave the pet’s neck as this may increase
the risk of skin irritation
• Check the fit again as your pet becomes more
comfortable with the collar
FREQUENTLY ASKED QUESTIONS
Q: Is the Receiver Collar waterproof?
A: Yes, the Receiver is fully waterproof.
Q: Is the Remote Transmitter waterproof?
A: No, the Remote Transmitter must be kept away from water.
Q: How long can I continuously deliver Vibration or Static Shock to my pet?
A: The max amount of time you can deliver the Vibration or Static Shock to your
dog continuously is 10 seconds. Then the remote will go to Protection Mode.
Q: What should I do if my dog’s neck becomes red and irritated?
A: Stop using the product immediately for at least 48 hours. If
the condition persists beyond 48 hour please consult your
veterinarian.
Q: Can I attach a leash to the Receiver collar?
A: No, this can result in pulling the contact points too tightly against your dog’s
neck. Use a separate collar when needed.
Q: When should I recharge the Transmitter and Receiver Unit?
A: Receiver: When the receiver is not in pairing mode but the indicator is
blinking, it indicates that the receiver battery is very low and you need to
charge it.
Q: How long does the charge last on the collar?
A: Actually, it depends on how often you use it. Normally the charge lasts about
15 days.
Q: What is the recommended time to have the collar on the dog?
A: We recommend using it no more than 12 hours per day.
Q: Does the remote work when I don’t know where my dog is?
I just know he’s near.
A: Yes, if he’s in the remote-controlled range.
Q: What is remote-controlled range?
A: It is about 1600 ft.
Q: Will this work through a wall?
A: Yes, it will. But the wall may aect the remote control range.
Q: Does the remote have a belt clip?
A: Yes, it has a belt clip.
Q: Can I control 2 dogs with 1 remote?
A: Yes, you can control 2 dogs with 1 remote.
Receiver Collar :
Collar (receiver) Dimensions :
Collar material :
Strap girth :
Strap material :
Collar (receiver) weight :
Remote weight :
Remote range :
The RED LED indicator will be blinking
when the Power is low.
6.2cm L x 3.5cm W x 3.2cm H
ABS+PC
64cm
TPU
47g
61.2g
1600 ft, 433MHz
SPECIFICATIONS

T
H
E
B
E
S
T
I
N
D
U
S
T
R
I
E
S
T
H
E
B
E
S
T
I
N
D
U
S
T
R
I
E
S
—
T
H
A
T
'
S
A
L
L
Y
O
U
N
E
E
D
Thank you for choosing our dog training products. You
and your pet deserve a companionship that include
memorable moments and shared understanding
together. Our mission is to ensure your pet’s safety
by providing you with the tools and techniques to
successfully train your pet. If you have any questions.
please, contact our customer service:
www.tbi-pro.com [e-mail]