TC Electronic SUB 'N' UP MINI OCTAVER User manual

Quick Start Guide
SUB 'N' UP MINI OCTAVER
(1)
(5)
(6)
(7)
(8)
(2)
(3)
(4)
Visit musictribe.com to download the full manual
V 1.0

(EN) Controls
(1) Dry - Adjusts the mix between the dry
guitar signal and the octaver eect.
(2) Sub - Adjusts the level ofmthe
octave-down signal.
(3) Output
(4) Footswitch - Turns the eect on
and o.
(5) USB - Connect to your computer for
rmware updates and TonePrint editing.
(6) Power - Connect a 9 V / >100 mA
power supply.
(7) Up - Adjusts the level of the
octave-up signal.
(8) Input
(ES) Controles
(1) Dry - Ajusta la mezcla entre la señal
de guitarra seca y el efecto de octava.
(2) Sub - Ajusta el nivel de la señal de
octava hacia abajo.
(3) Output
(4) Footswitch - Activa y desactiva
el efecto.
(5) USB - Conéctese a su computadora
para actualizaciones de rmware y
edición de TonePrint.
(6) Power - Conecte una fuente de
alimentación de 9 V /> 100 mA.
(7) Up - Ajusta el nivel de la señal de
octava arriba.
(8) Input
(FR) Réglages
(1) Dry - Règle le mixage entre le signal
de guitare sec et l’eet octaver.
(2) Sub - Règle le niveau du signal
d’octave vers le bas.
(3) Output
(4) Footswitch - Active et désactive
l’eet.
(5) USB - Connectez-vous à votre
ordinateur pour les mises à jour du
micrologiciel et l’édition TonePrint.
(6) Power - tation 9 V /> 100 mA.
(7) Up - Règle le niveau du signal
d’octave vers le haut.
(8) Input
(DE) Bedienelemente
(1) Dry - Stellt die Mischung zwischen
dem trockenen Gitarrensignal und
dem Oktaver-Eekt ein.
(2) Sub - Stellt den Pegel des
Oktav-Down-Signals ein.
(3) Output
(4) Footswitch - Schaltet den Eekt
ein und aus.
(5) USB - Stellen Sie eine Verbindung zu
Ihrem Computer her, um Firmware-
Updates und die Bearbeitung von
TonePrint zu erhalten.
(6) Power - Schließen Sie ein
9 V /> 100 mA Netzteil an.
(7) Up - Stellt den Pegel des Oktavsignals ein.
(8) Input
(PT) Controles
(1) Dry - Ajusta a mixagem entre o sinal
de guitarra seco e o efeito de oitava.
(2) Sub - Ajusta o nível do sinal de oitava
para baixo.
(3) Output
(4) Footswitch - Liga e desliga o efeito.
(5) USB - Conecte-se ao seu computador
para atualizações de rmware e
edição de TonePrint.
(6) Power - Conecte uma fonte de
alimentação de 9 V /> 100 mA.
(7) Up - Ajusta o nível do sinal de
oitava acima.
(8) Input
(IT) Controlli
(1) Dry - Regola il mix tra il segnale dry
della chitarra e l’eetto octaver.
(2) Sub - Regola il livello del segnale di
ottava verso il basso.
(3) Output
(4) Footswitch - Attiva e disattiva l’eetto.
(5) USB - Collegati al tuo computer per
gli aggiornamenti del rmware e la
modica del TonePrint.
(6) Power - Collegare un alimentatore
da 9 V /> 100 mA.
(7) Up - Regola il livello del segnale di
ottava su.
(8) Input

(NL) Bediening
(1) Dry - Regelt de mix tussen het droge
gitaarsignaal en het octavereect.
(2) Sub - Regelt het niveau van het
octaaf-omlaag-signaal.
(3) Output
(4) Footswitch - Zet het eect aan
en uit.
(5) USB - Maak verbinding met uw
computer voor rmware-updates en
TonePrint-bewerking.
(6) Power - Sluit een 9 V /> 100 mA
voeding aan.
(7) Up - Regelt het niveau van het octaaf
omhoog-signaal.
(8) Input
(SE) Kontroller
(1) Dry - Justerar mixen mellan den torra
gitarrsignalen och oktaveekten.
(2) Sub - Justerar nivån för
oktavnedgångssignalen.
(3) Output
(4) Footswitch - Slår på och av eekten.
(5) USB - Anslut till din dator för
rmwareuppdateringar och
TonePrint-redigering.
(6) Power - Anslut en 9 V /> 100 mA
strömförsörjning.
(7) Up - Justerar nivån på oktavsignalen.
(8) Input
(PL) Sterownica
(1) Dry - Reguluje miks pomiędzy
suchym sygnałem gitary a
efektem oktawera.
(2) Sub - Regulacja poziomu sygnału
obniżonego o oktawę.
(3) Output
(4) Footswitch - Włącza i wyłącza efekt.
(5) USB - Połącz się z komputerem w
celu aktualizacji oprogramowania
sprzętowego i edycji TonePrint.
(6) Power - Podłącz zasilanie
9 V /> 100 mA.
(7) Up - Reguluje poziom sygnału
podniesionego o oktawę.
(8) Input

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street,
Las Vegas NV 89118,
United States
Phone Number: [phone]
SUB 'N' UP MINI OCTAVER
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
TC Electronic
SUB 'N' UP MINI OCTAVER
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and receiver.
•• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Important information:
Changes or modications to the equipment not expressly approved by MUSIC Tribe can void the user's
authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive
2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and
Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark