Tci 9200101 User manual

920 Dozer

OPERATOR'S MANUAL

SERIAL NUMBER 9200101–9200500

ISSUE 1.3, NOVEMBER 2021

60150AENG

epcatalogs.com

iii

920 AVAILABLE LITERATURE

Operator's Manual (this manual) ....................................................................................................Part No. 60150AENG

Service Manual...............................................................................................................................Part No. 60151AENG

Parts Catalog..................................................................................................................................Part No. 60152A

Vehicle Moving and Transporting Instructions ................................................................................Part No. 60156AMUL

Engine Operation and Maintenance Manual, N45 Tier 2/Non-Certied .........................................Part No. 45045AMUL

Engine Operation and Maintenance Manual, N45 Tier 4f ..............................................................Part No. 42939AMUL

INTRODUCTION ................................................................................................................................................ v

MACHINE IDENTIFICATION AND SERIAL NUMBERS .................................................................................... vi

STANDARDS FOR MACHINE OPERATOR PROTECTIVE STRUCTURES ....................................................vii

NON-APPROVED FIELD PRODUCT CHANGES ............................................................................................viii

REGULATORY INFORMATION......................................................................................................................... ix

WARRANTY–EPA.............................................................................................................................................. x

VIBRATION AND NOISE LEVELS.....................................................................................................................xii

SAFETY ..............................................................................................................................................................1

CONTROLS AND OPERATION..........................................................................................................................2

LUBRICATION AND MAINTENANCE.................................................................................................................3

TCi 920 Dozer

TABLE OF CONTENTS

Original Instructions. The information contained in this manual is current at time of printing. Improvements

to the machine are ongoing and may not be covered; in these cases, contact your Tigercat dealer for the

appropriate information.

epcatalogs.com

An Operator's Manual, Service Manual, and a Parts Catalog are made available by Tigercat to assist the dealer,

customer, and operator in becoming familiar with the features of the TCi 920 Dozer.

SERIAL NUMBERS:

920 Dozer 9200101–9200500

The TCi 920 Dozer is designed for forestry road building and site preparation.

The Operator's Manual provides the operator with techniques for proper and safe operation of the TCi 920 Dozer.

There is also important information regarding the safe operation of the attachment (if equipped). The Service Manual

contains safety and servicing procedures and a preventive maintenance schedule to ensure optimum machine

performance.

Section 1 in both the Operator's Manual and the Service Manual contains safety information that must be followed.

Throughout the rest of the manuals, DANGER, WARNING, and CAUTION notices are displayed where necessary,

drawing attention to possible hazards when performing certain procedures.

Read and understand the information contained in this manual, and all attachment and accessory manuals associated

with this machine, prior to starting, operating, or performing maintenance on the machine for the rst time.

This manual uses the International System of Units (SI) and United States customary units. Each measurement is

given in SI units rst, with the US customary units following in parentheses ( ).

Replace the Operator's Manual immediately if lost, damaged, or unreadable. This manual is an important part of the

machine and should remain with the machine if sold.

Only trained personnel are allowed to operate or work on the machine. Follow all jobsite organization rules when

operating the machine in coordination with other machines, vehicles, and people on the jobsite.

INTRODUCTION ................................................................................................................................................ v

TCi 920 Dozer

INTRODUCTION

Tigercat Industries Inc.

P.O. Box 637

Brantford, Ontario

Canada N3T 5P9

Tel: (519) 753-2000

Fax: (519) 753-8272

epcatalogs.com