TCL L32M61A3 User manual

TCL
Service Manual
L32M61A3
1. Caution··························································································2
2. Specifications of chassis·································································6
3. Alignment Procedure·····································································11
4. IC Brief Instruction·········································································21
5. Schematic Diagram········································································38
6. PCB Layout···················································································48
7. Explode View·················································································50
8. BOM List·······················································································62
This manual is the latest at the time of printing, and does not
include the modification which may be made after the printing, by
the constant improvement of product.

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN.
2
dangerous
1

3
FOR YOUR PERSONAL SAFETY
1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.
4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.
6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.
7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.
9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.
10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
CAUTION:
Read all of these instructions. Save these instructions for later use. Follow all Warnings and
Instructions marked on the audio equipment.
1. Read Instructions- All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
IMPORTANT SAFETY INSTRUCTIONS

4
PROTECTION AND LOCATION OF YOUR SET
11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.
12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.
13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.
14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in enclosure, unless proper ventilation is provided.
PROTECTION AND LOCATION OF YOUR SET
15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.
15.2. Note to CATV system installer : (Only for the television set with CATV reception)
This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.
ANTENNA
LEAD- IN WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMP
NEC-NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS
a built-in
installer s

OPERATION OF YOUR SET
18. This television set should be operated only from the type of power source indicated on the marking label.If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.
19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.
20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set and unplug the television set from the wall outlet.
IF THE SET DOES NOT OPERATE PROPERLY
21. If you are unable to restore normal operation by following the detailed procedurein your operating instructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.
22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.
23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being
turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.
FOR SERVICE AND MODIFICATION
24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.
25. When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
26. Upon completion of any service or repairs to the television set, ask the service technician to perform
routine safety checks to determine that the television is in safe operating condition.
5
off

2. Product Specification
Model(
ൟো
): L32M71S3
˻
6SHFLILFDWLRQ
Items description 5HPDUNV
Model
ID
Model L32M61A3
Remote Control Picture 䘹᥻఼೒⠛ൟো
RC TYPE Philips RC1113339
General
Basic Info.
෎ᴀֵᙃ
ˇ
Panel Size
˄
inch
˅
32"
ˇ
Panel Supplier CMO
ˇ
Aspect Ratio 16:9
ˇ
Chassis Name MS19
ˇ
solution MST9E19A
ˇ
Market EM
ˇ
Certification CB
Panel Specification ሣⱘⳌֵ݇ᙃ
ˇ
Model V320B1-L04 ሣⱘൟোܼৡ៪ㅔ⿄
ˇ
Pixel Pitch (vertical stripe RGB pixels) 0.173mm (H) × 0.519mm (V) ⚍䎱
ˇ
Resolution 1366X768
ˇ
Brightness 500 cd/m2
ˇ
Contrast Ratio 1200˖1
ˇ
View Angle (H/V) 176°/176°
ˇ
Viewing Technology TFT ฿609$៪6,36
ˇ
Response Time (Tr+Tf)
ˇ
Response Time (gray to gray) 6.5ms
ˇ
Back Lights (CCFLx) 16 ♃ㅵ᭄䞣
ˇ
Panel Interface LVDS
ˇ
Color 16.7M
ˇ
Life Time MIN 50,000hrs
Environmental Conditions
ˇ
Operation Temperature 0-50°C
ˇ
Storage Temperature -20-60°C
ˇ
Operation Humidity 90% RH MAX
ˇ
Storage Humidity 10-90% RH
ˇ
Operation Air Pressure
ˇ
Storage Air Pressure
Power
ˇ
Power Supply AC 100-240V,50/60Hz Џ⬉⑤
ˇ
Integrated Power Supply YES
ˇ
External Adapter NO ᖙ乏⊼ᯢ⬉໻ᇣ
ˇ
Cord Type (Default) VDE

ˇ
Power Consumption - TV ON 130W
ˇ
Power Consumption - Standby Less than 3W
ˇ
LED indication - Power ON BLUE
ˇ
LED indication - STANDBY Red
ˇ
AC Switch Yes (Side BACK) ᖙ乏⊼ᯢѸ⌕ᓔ݇ԡ㕂˄)URQW%DFN723%RWWRP
ˇ
Standby to Power ON By CH+/- button on panel or ON-OFF/ CH+/- KEY
ON RC ℸ󰶄ⶹ䴶ᵓ៪䘹᥻఼ϞાϾ䬂ৃҹࡼᴎ఼
System
ˇ
Tuning - Max Programs 200(0~199) ᳔໮乥䘧ᄬټϾ᭄
- Install Features Auto search and fine adjustment
- Technology PLL ৃҹ฿3//៪)6៪96
- Indication Freq./CH
- Mode channel list བᵰᰃ乥䘧㸼᧰ৄህ⫼FKDQQHOOLVW
ˇ
TV Systems NTSC-M,PAL M,PAL N ໄ䷇ࠊᓣ79ࠊᓣݭ೼ϔ䍋
ˇ
IF Freq. 45.75MHz
ˇ
Freq. Bands VHF-L VHF-H,UHF,Hyperband
ˇ
Twin Tuner ---
ˇ
AV System PAL,NTSC ⊼ᛣ᳝ѯᴎ఼ϡᬃᣕ176&
Picture
Picture-Processing(TV/Video)
ˇ
Scan Standard Progresive 60Hz
ˇ
Scaler Mode 16:9, 4:3, cinerama
ˇ
Comb Filter 2D
ˇ
Black Strech, Blue Strech Yes
ˇ
LTI, CTI Yes
ˇ
PIP/POP - Type NO 䳔⊼ᯢᬃᣕҔМ῵ᓣ䕧ֵܹ⑤ϟⱘ⬏
Ё⬏⬏໪⬏
ˇ
PIP/POP - Features NO
ˇ
Deinterlace Motion compensation བᵰ᳝ℸࡳ㛑䳔⊼ᯢ⫼њાѯ໘⧚ᮍᓣঞ䰘ࡴࡳ㛑
བ'&',ㄝ
ˇ
Picture Effects 4 picture effects (Natural,Bright,Personal,Soft)
ˇ
Picture Enhancement Cross-color supress(ccs) skin fresh
correction,Gama correction, Film mode
䳔䆺㒚߫В⫼њાѯ⬏䴶ࡴᔎᡔᴃˈ՟བ⬉ᕅ῵
ᓣˈԑ偀ᬭℷˈ㙸㡆ࡴᔎㄝㄝ
ˇ
Picture Noise Reduction WEAK;medium;STRONG
ˇ
Color Temperature normal;warm;cool ৃҹ฿㡆⏽᭄ᄫгৃ⫼:DUPˈ&ROGㄝ㸼⼎DŽৠᯊ᳔
ད⊼ᯢ೼ાѯֵ⑤῵ᓣϟৃҹ䇗ᭈ䖭ѯ㡆⏽䗝乍DŽ
ˇ
Others ᰃ৺᳝⬏䴶䴭ℶࡳ㛑
Please add other items referring to factual situation
PC Compatibility
ˇ
VGA Input VGA,SVGA,XGA,SXGA,WXGA@70Hz ሑ䞣⊼ᯢܼ䚼ᬃᣕḐᓣ
ˇ
DVI Input ሑ䞣⊼ᯢܼ䚼ᬃᣕḐᓣ
ˇ
HDMI Input XGA,up to SXGA@70Hz,720P,1080i ሑ䞣⊼ᯢܼ䚼ᬃᣕḐᓣ
ˇ
DDC Yes
HDTV/SDTV Ready
ˇ
SDTV Input - YCbCr (480p/480i,576p/576i)@50/60Hz ሑ䞣⊼ᯢܼ䚼ᬃᣕḐᓣ
ˇ
HDTV Input - YPbPr (720p,1080i,1080P)@50Hz/60Hz ሑ䞣⊼ᯢܼ䚼ᬃᣕḐᓣ
ˇ
HDTV Input - DVI ሑ䞣⊼ᯢܼ䚼ᬃᣕḐᓣ
ˇ
HDTV Input - VGA (720p,1080i)@50Hz/60Hz ሑ䞣⊼ᯢܼ䚼ᬃᣕḐᓣ
Build-in Data System
ˇ
Teletext Standard ---
ˇ
Teletext Language ---
ˇ
Teletext Pages ---
ˇ
Teletext Features --- ೒᭛ࡳ㛑ⱘϔѯ⡍⚍ˈབ㗏义ǃ䗣ᯢ⌣㾜ㄝ
ˇ
CCD(Closed Caption) Yes
ˇ
V-chip Yes
ˇ
Macrovision Yes
ˇ
CGMS
ˇ
HDCP Yes
Sound Electric Performance ୛ু⬉⇨Ⳍ݇䚼ߚ
ˇ
RMS Power output(Internal) 2*12W ୛ুࡳ㗫
ˇ
Speaker Max Power 2*6W ໄ䷇䕧ߎࡳ㗫

Sound
Sound Effect
ˇ
Sound Processing BTSC 1,&$0䖬ᰃ%76&ㄝˈ䇋߫В䆺㒚
ˇ
DVSS(Dolby Virtual Surround Sound)
ˇ
AVC(Auto Volume Control) Yes
ˇ
BBE ---
ˇ
SRS ---
ˇ
Sound Features Stereo,News,MUSIC,Personal 䳔䆺㒚߫В⫼њાѯໄ䷇ᬜᵰ໘⧚ᮍ
⊩
ˇ
Sound Control AVC,MTS,SOUND MODE,BASS,TREBLE,
BALANCE
Џ㽕ໄ䷇ᬜᵰ᥻ࠊ䗝乍ࣙᣀഛ㸵఼ǃ
῵ᓣ䗝ᢽǃ26'䗝乍ㄝ
Please add other items referring to factual situation
Other Functions
Accessional Equipment Џ㽕䰘ࡴࡳ㛑῵ഫ
ˇ
Card Reader --- 䳔⊼ᯢⱘ㉏ൟㄝֵᙃ
ˇ
DVD Combo --- ሑ䞣⊼ᯢᬃᣕાѯ㉏ൟⱘֵ⑤᭄᥂
ˇ
Support USB Connection --- ሑ䞣⊼ᯢᬃᣕાѯ㉏ൟⱘֵ⑤᭄᥂
ˇ
Built-in DTV Reception and System ---
Please add other items referring to factual situation
Operation Control
ˇ
Clock/Timer Function 24h Timer;TURN ON/OFFf;Sleep timer
ˇ
Lock
ˇ
OSD Features OSD position adjustable, ⊼ᯢ26'ᰃ৺໻ᇣǃԡ㕂ৃ䇗ˈᰃ৺ᰃ
䗣ᯢㄝ
ˇ
OSD Language English,French,Spanish,Portuguese
ˇ
OSD Main Menu Picture,Sound,PAR.CONTROL,Preferences,Setup
,TIMER
ˇ
Keyboard Control (Buttons on the panel) Source,Menu,CH+,CH-,Vol+,Vol-, Џᴎᣝ䬂䴶ᵓ᥻ࠊ䗝乍
ˇ
Remote Control ON-OFF,MENU,INPUT,CH+/-,VOL+/-
,SOUND,PRESET,INFO,FAVORITE,etc,. 䘹᥻఼Џ㽕᥻ࠊ䗝乍ᖿ᥋䬂
Other Functions
ˇ
Game
ˇ
Screen Protect
ˇ
Clear Screen
ˇ
Demo Functions ⬏䴶៪ໄ䷇ㄝᬜᵰ໘⧚ⱘⓨ⼎ࡳ㛑
Please add other items referring to factual situation
Terminals
Connectors Side
ˇ
AV In
p
ut - CVBS
(
RCA
)
---
བᵰᶤϔ䕧ֵܹো݊ᅗ䗮䘧໡⫼䇋
⊼ᯢ݋ԧᰃાϔ䏃䗮䘧⊼ᛣ໡⫼ষϡ
⫼฿᭄䞣
Audio Input - R/L
(
RCA
)
---
Audio Input - Mono
(
RCA
)
---
ˇ
S-video ---
Audio Input - R/L
(
RCA
)
---
ˇ
Head
p
hone Out - R/L
(
ĭ3.5mm
)
---
ˇ
USB Connecto
r
---
Connectors Rea
r
ˇ
AV In
p
ut - CVBS
(
RCA
)
2
Audio Input - R/L
(
RCA
)
2
ˇ
S-video 1
Audio Input - R/L
(
RCA
)
Share with AV1
ˇ
Y,Pb,Pr In
p
ut
(
RCA
)
1
(
component
)
Audio Input - R/L
(
RCA
)
1
ˇ
Y,Cb,Cr In
p
ut
(
RCA
)
Share with
Y
ˈPbˈPr བᵰ<3E3U໡⫼ˈ䇋೼ℸ󰶄⊼ᯢ
Audio Input - R/L
(
RCA
)
Share with
Y
ˈPbˈPr Audio in
p
ut
ˇ
VGA In
p
ut
(
RGB
)
(
D-SUB15
)
1
Headphone In R/L
(
ĭ3.5mm
)
Audio Input - R/L
(
RCA
)
1
(
Share with
Y
ˈPbˈPr Audio in
p
ut
)
ˇ
DVI Input
Audio Input - R/L
(
RCA
)
ˇ
HDMI In
p
ut 1
ˇ
SCART RGB+Y/C+CVBS In ---
ˇ
SCART RGB+Y/C+CVBS In/out
(
full
)
---
ˇ
SCART Y/C+CVBS In/ou
t
---
ˇ
SCART Y/C+CVBS In ---
ˇ
AV out
p
ut-CVBS
(
RCA
)
1
(
Onl
y
for TV/AV source
)
Audio output - R/L
(
RCA
)
ˇ
Audio Out
p
ut - R/L
(
RCA
)
1
ˇ
Audio Out
p
ut - R/L
(
Line
)
ˇ
Head
p
hone Out - R/L
(
ĭ3.5mm
)
1
ˇ
Audio Out
p
ut - Woofe
r
(
RCA
)
---
ˇ
Control/Signal Socket (for MFB) ---
ˇ
S/W Updating Socket Share with VGA SOCKET
ˇ
RF - Terr.Antenna in
(
T
yp
e
)
75ohm
(
F TYPE
)
ˇ
ITV Smart Port ---
ˇ
I-Link
(
1394
)
Ca
p
acit
y
---

ˇ
IR Blaster Jack ---
ˇ
Other Function Extended Interfaces --- ࡳ㛑ᠽሩ᥹ষˈ↨བᎹ⿟䅶ㄝ⡍⅞
ˇ
Power In Cinch
A
C code in
Connectors Front
ˇ
AV Input - CVBS (RCA) ---
Audio Input - R/L (RCA) ---
Audio Input - Mono (RCA) ---
ˇ
Headphone Out - R/L (ĭ3.5mm) ---
ˇ
USB Connecto
r
---
Connectors Top
Please add other items referring to factual situation X
X
Connectors Bottom
Please add other items referring to factual situation X
X
Configuration&Artwork
Configuration
ˇ
Cabinet Name M71 ᠔ሲ໪㾖㋏߫
ˇ
Features Flat (no arc) ໪㾖⡍⚍ᦣ䗄
ˇ
Speaker Assemble Mode Integrated ℸ󰶄㸼⼎ᰃ୛ুݙ㕂䖬ᰃ䷇ㆅ໪ᣖ˄Integrated or
Separated˅
ˇ
Speaker Grille original holes in F.CAB ୛ু㔥⡍⚍DŽབᰃ৺䞛⫼䞥ሲ㔥㔽ㄝ
ˇ
Front Cabinet - Material and Color HIPS Black A6881
ˇ
Rear Cabinet - Material and Color HIPS Black A8252
ˇ
Keyboard Position Middle of the top side on the front panel
ˇ
Tuner Detachable No
Artwork
ˇ
O
p
eration Manual Lan
g
ua
g
eEn
g
lish
ˇ
Lo
g
o Features
(
Front
p
anel
)
stamp /RJRᴤ᭭៪ᅝ㺙ᔶᓣ
ˇ
Dimension - with Base Stand
(
L*H*D
)
813*650*273
(
mm
)
ᭈᴎ㻌ᴎሎᇌ⊼ᯢ䰸ᑩᑻ໪৿ાѯЏ㽕䚼ӊ
- without Base Stand (L*H*D) 813*591*109
(
mm
)
ᭈᴎ㻌ᴎሎᇌ⊼ᯢ৿ાѯЏ㽕䚼ӊ
ˇ
Dimension -
p
acka
g
ed
(
L*H*D
)
944*751*374
(
mm
)
Џᴎࣙ㺙ሎᇌ˄⊼ᯢ৿ાѯ䰘ӊ
ˇ
Net Weight 15.5kg ᭈᴎޔ䞡⊼ᯢ৿ાѯЏ㽕䚼ӊ
ˇ
Gross Weight 19.5Kg ᭈᴎ↯䞡⊼ᯢ৿ાѯЏ㽕䚼ӊ
ˇ
Container Loading - 20 fee
t
111sets 㺙ᶰ᭄⊼ᯢ৿ાѯЏ㽕䚼ӊ
- 40 feet 228sets 㺙ᶰ᭄⊼ᯢ৿ાѯЏ㽕䚼ӊ
- 40 feet high 228sets 㺙ᶰ᭄⊼ᯢ৿ાѯЏ㽕䚼ӊ咬䅸฿ݭ᳔ᐌ㾕㒘㺙
῵ᓣ
Wall Mount
ˇ
Type WMB230 (optional) ᣖᶊ㉏ൟˈൟোˈᰃ৺9(6$󰵼ޚ
ˇ
Features fixed
⡍⚍
˖
೎ᅮ䖬ᰃৃᮟ䕀ⱘ
ˈ
᳔ད󰵼ᯢᮟ䕀ᮍ৥㾦
ˇ
Packaging Method Separated
ᑺ
ࣙ㺙ᮍᓣ
˖
ᰃ৺ৃ⣀ࣙ㺙
ˈ
ᰃ৺ৃЏᴎ
ϔ
䍋ᠧ
ˇ
Dimension - packaged (L*H*D) 265*168*44(mm)
ࣙ
ࣙ㺙ሎᇌ
ˇ
Net Weight and Gross Weight Net Weight: 0.2kg ; Gross Weight:0.5 Kg ޔ䞡↯䞡ˈ䳔ߚ߿߫В
S
p
eaker Bo
x
ˇ
Fixing Method --- ䷇ㆅᅝ㺙῵ᓣ
ˇ
Features --- ䷇ㆅ⡍⚍
ˇ
Packaging Method ---
ˇ
Dimension - packaged (L*H*D) ---
ˇ
Dimension - unpackaged (L*H*D) ---
ˇ
Net Weight and Gross Weight ---
Multi-function Box ---
ˇ
Packaging Method ---
ˇ
Dimension - unpackaged (L*H*D) ---
ˇ
Dimension - packaged (L*H*D) ---
ˇ
Net Weight and Gross Weight ---
Base Stand
ˇ
Features
ˇ
Packaging Method Integrated
ˇ
Dimension - packaged (L*H*D) no
ˇ
Dimension - unpackaged (L*H*D) no
ˇ
Net Weight and Gross Weight Net Weight:0.5 Kg ; Gross Weight: 0.5Kg
ˇ
Container Loading - 20 fee
t
no
- 40 feet no
- 40 feet high no
Accessories
ˇ
Operation Manual Yes
ˇ
Service Manual ---
ˇ
Warranty Card ---
ˇ
Schematic Diagram ---
ˇ
Remote Control Yes
ˇ
Battery (number and type) Yes (2×AA,1.5V˅
ˇ
Speakers Box(external) ---
ˇ
Wall Mount optional
ˇ
Wireless Headphone (external)
ˇ
RF Cable
ˇ
Power Cord YES

ˇ
DVI Cable
ˇ
VGA Cable
ˇ
HDMI Cable
ˇ
Control/Signal Cable (Panel to MFB)
ˇ
AV Cable
ˇ
Component Video Cable
ˇ
Audio Cable
Please add other items referring to factual situation

3. Alignment Procedure
Chassis Name Serial No.
Issued on Page
Updated on Version
1 General Description
The MS19 chassis adopts MST9E19A IC, which is a high performance and fully
integrated IC for multi-function LCD TV, with typical features as full function, multi terminals and
double-layer single board.
The chassis meets to different markets requirements via differing in functions, such as in
the region of South America, Asia-Pacific, Europe and others markets. It is a performance-cost
ratio higher solution, because of its high integration might lower the cost of researching,
manufacturing and management.
The main difference among Model L32M61S3ǃL32E62S3ǃL32M71S3 and L32E77S3 is
the mechanic, which causes the key board and IR board difference. The other parts, includes
HW and SW are the same. The three models support NTSC-M, PAL M and PAL N system.
The following alignment procedures are suitable for the above mentioned models..
2 The way to enter Factory Mode
A Way: Press MENU key and enter “1950” in three seconds to enter.
B Way: Press GO BACK shortcut key directly. This way should make sure FACTORY HOT KEY
is at ON in Page PRODUCTING in Factory Menu.
3 The descriptions on Factory Mode
CH+ CH- VOL+ VOL-: select and setting
Menu: go back to upper menu
Menu or Clear: Quit the factory mode.
Item Sub-Item Description Works
SOURCE Shift among sourcing via pressing VOL+, VOL- OK
ADC ADJ Remarks
ƾ
works in the condition of HDTV and PC sourcing OK
White Balance Calibration setting OK
SOURCE Shift among sourcing
COLOR
TEMP
NORMALǃWARMǃCOOL OK
WHITE R R Gain, adjust via manually or automatic OK
WHITE G G Gain, adjust via manually or automatic OK
WB
WHITE B B Gain, adjust via manually or automatic OK

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Chassis Name Serial No.
Issued on Page
Updated on Version
Item Sub-Item Description Works
BLACK R R Shiftˈadjust via manually or automatic OK
BLACK G G Shiftˈadjust via manually or automatic OK
WB
BLACK B B Shiftˈadjust via manually or automatic OK
VOL CURVE Volume Curve adjustment;
X0, X1, X2, X3, X4, on behalf of the user menu volume
value of the 0,30,50,80,100.
Please don’t adjust it any more if the value is verified by
test.
Adjust it, if there is some problem in production.
OK
Analog Picture Cureve;
X0, X1, X2, X3, X4, on behalf of the user menu volume
value of the 0,30,50,80,100.
Please don’t adjust it any more if the value is verified by
test.
Adjust it, if there is some problem in production, or take
the default value.
OK
CON. Contrast Curve OK
BRI. Brightness Curve OK
SAT. Saturation Curve OK
SHARP. Sharpness Curve OK
PICTURE
CURVE
LIGHT. Back light Curve OK
PICTURE
MODE
Picture modes analog value can be adjusted in this page,
include SOFT, NATURAL, BRIGHTE, PERSONAL.
Please don’t adjust it any more if the value is verified by
test.
Adjust it, if there is some problem in production, or take
the default value.
OK

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Chassis Name Serial No.
Issued on Page
Updated on Version
Item Sub-Item Description Works
PRODUCTING Should adjust while assembling the set. OK
FACTURY HOT
KEY
Short-cut key to enter factory mode setting:
GO BACK is the short-cut key if it is “ON”.
Do remember to set it at “OFF” if it out going.
OK
WARM UP
STATUS
Aging Mode setting:
“ON” means Snow Picture showing instead of Blue
Background if there is no signal input.
Do remember to set it at “OFF” if it out going.
OK
EEPROM INIT EEPROM initialization:
1. When the first time to fires up the set, please
enter this menu and initialize it.
2. Press Left/Righ key and waiting for about 5
seconds until “OK” displayed, which means the set
finish the initialization.
3. switch off AC power
4. Power On it again, the EEPROM initialized.
5. Continue other alignment.
OK
STRUCTURE Model No. Choose:
The software is compatible with a number of
models, such as:E62 for <L32E77S3 L32E62S3>,
M61-M71 for <L32M61S3, L32M71S3>
1. Choose the correct model No.
2. Power off, then Power on the set to make the
setting works.
OK
LOGO LOGO Displayed or not.
ON:TCL LOGO displayed when turn on the set.
OFF: LOGO disappears.

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Item Sub-Item Description Works
Outgoing setting, please keep the defaults setting but
the special requirements.
OK
VOLUME 30 OK
SHOP
CONTENT
PICTURE
MODE
NATURAL OK
SOUND MODE STEREO OK
TV-CHANNEL 1 OK
LANGUAGE English or local language OK
NORMALǃWARMǃCOOL
COLOR TONE OK
LAST OK
POWER MODE
LAST
LAST˖
It means the set will memory the last status and
displays it.
If the last operation is CUT OFF AC directly without
standby, next time, the set will POWER ON
automatically without standby if power on.
If the last operation is StandbyÆPower OFF, next
time, the set will be Standby status unless the user
continues to switch it on.
OK
SET UP
STB˄Standby˅˖
POWER MODE
STB
OK
It means the set will be Standby status and waiting
for the user to manually switch on.
ON˖
POWER MODE
ON
OK
It means the set will Power On automatically if power
on it .
Please set it at ON in aging processing.
SHOP INIT
DO
Outgoing factory Initialization.
Press Left/Righ key and waiting for about 5 seconds
until “OK” displayed, which means the set finish the
initialization.
Please remember to do this when outgoing factory.
4 Aging
Chassis Name Serial No.
Issued on Page
Updated on Version

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
When aging the set, please setting “WARM UP STATUS” at “ON” in PRODUCTION menu,
and enter “SET UP” menu to set.
Setting “Power Mode” at ON if need power on directly.
Setting “Power Mode” at STB if need aging the set in standby status.
5 Production Adjusting Item
ƻ
1ADC adjustment
The chassis can execute ADC auto-tune if in YPbPr / PC sourcing.
Enter Factory Menu, select YPbPr / PC in Source item, then select AUTOTUNE in ADC ADJ,
press V+ to run, waiting for about 5 seconds until “OK” displayed, which means the set finish
the ADC adjustment, and quit.
YPbPr sourcing, please apply
ƾ
100
ˁ
color bar pattern
ƾ
PC sourcing, please apply
ƾ
16-scale grey pattern
ƾ
Remark: Please make sure ADC adjustment have done successfully before White
balance adjustment.
ƻ
2White Balance adjustment
Please adjust the NORMAL, WARM, COOL temperature in White balance according to
company regular.
Please make sure ADC adjustment have done successfully before White balance adjustment,
and select the picture mode at “NATURAL”.
White balance adjustment should under three different sourcing:
AV/TV/SVIDEOƾsourcing reunification under the AV adjustment:
please apply
ƾ
NTSC-M system 8-scale grey pattern
ƾ
ƾYPbPr/HDMI sourcing reunification under the YPbPr adjustment:
please apply
ƾ
16-scale grey pattern
ƾ
ƾPC sourcing should adjust singly
please apply
ƾ
16-scale grey pattern
ƾ
TCL factory can adjust white balance according to actory working instruction and tools.
If need manual adjustment, please operate in WB page in factory menu.
Chassis Name Serial No.
Issued on Page
Updated on Version

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
NOTE: when adjust white balance,please do not change the data of the WHITE G and
BLACK G,only adjust the other two:
We suggest adjust x=280,y=290
ƻ
3Out going Setting
Outgoing setting, please keep the defaults setting but the special requirements.
Press Left/Righ key and waiting for about 5 seconds until “OK” displayed, which means the set
finish the initialization.
Please remember to do this when outgoing factory.
6 In System Programme for MS19 Chassis
Equipment required as follow:
Connecting board and VGA line as illustrated: Using Standard Parallel lines connects to PC via
Parallel socket, and VGA line connects to TV set via VGA Socket.
Notes: Please make sure Pin12 and Pin 15 of VGA line should not be NG.
Connects to PC ConnectstoTVset
Chassis Name Serial No.
Issued on Page
Updated on Version

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Power on TV set, and run ISP Tool V4.3.2.2exe in PC.
Click on the “config”, and set as illustrated, Port Type: LPT1, Base Addr: 0x378. Then, click on “Auto
detect” until OK showed. If not, please check and make sure all connects works well.
Chassis Name Serial No.
Issued on Page
Updated on Version

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Click on “Connect”, the follow picture showed means Flash IC Detected. Confirm it.
Click on “Read” and load the file with ”.bin” Suffix.
Chassis Name Serial No.
Issued on Page
Updated on Version

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Click on “Auto”, the follow picture showed, and “Run”
Then the follow picture showed, ISP running
Chassis Name Serial No.
Issued on Page
Updated on Version

TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Pass showed if it is completed successfully, if not, please try again until Pass showed.
Power off the TV set and unplug VGA line, then power on the TV set.
Chassis Name Serial No.
Issued on Page
Updated on Version