TDK A33 User manual

REMOVE KICKSTAND
1. USE FLATHEAD SCREWDRIVER
TO PRY KICKSTAND ATTACHMENT
LEG FROM HOLE
2. REPEAT ON OTHER SIDE
A33 Battery Replacement
Instructions

REMOVE BATTERY DOOR SCREWS
3. USE A TORX HEAD (size T-6)
SCREWDRIVER TO REMOVE 6
SCREWS
4. USE FLATHEAD SCREWDRIVER
TO PRY LID FROM HOUSING. THE
DOOR IS AFFIXED TO THE
HOUSING WITH ADHESIVE TAPE.
5. REMOVE DOOR AS SHOWN

REMOVE BATTERY AND
REPLACE WITH NEW BATTERY
6. REMOVE BATTERY FROM
HOUSING
7. UNPLUG HOUSING
CONNECTOR FROM BATTERY
CONNECTOR
8. REPLACE WITH NEW BATTERY
AND PLUG BATTERY CONNECTOR
WITH HOUSING CONNECTOR

BATTERY COVER INSTALLATION
9. RE-INSTALL BATTERY COVER
10. RE-INSTALL SCREWS (6
PLACES)
11. RE-INSTALL KICKSTAND.
SNAP BOTH ENDS INTO SPEAKER
HOUSING.

BATTERY COVER INSTALLATION
12. COMPLETED BATTERY
REPLACEMENT