Teac MC-DV639 User manual

MC-DV639

Features................................................................................2
For your Attention...................................................................3
Accessories...........................................................................4
Panel.................................................................................5-6
Connection.........................................................................7-8
System Setup...................................................................9-13
Play................................................................................14-19
Troubleshooting...................................................................20
Specification........................................................................21
Contents
-1-
Remote control
Instruction book
Power cord

Thank you for purchasing our product. Please go through this
manual carefully before connection and operation. Please keep
this manual for future reference.
DVD player is a new generation home player which can produce
high quality video and audio. Its performance is much better than
that of any previous home video playing equipment. As the best
signal source of home theatre system, it will give you the
uppermost enjoyment!
Built in Dolby Digital, LPCM etc. digital audio output
Hi-fi, 96kHz/24bi audio digital processor.
Software intelligent upgrade * High-resolution picture, support
the future video equipment
Coaxial digital audio output Super compatible with
DVD/VCD/CD/KODAK PICTURE CD
Latest the fourth generation servo, decoding single-wafer
technology, reliable stability and super error correction.
Full function remote control
AM/FM stereo radio tuner
Built-in high sensitivity amplifier
t or 48kHz/24bit
Features
-2-

To reduce the risk of electric shock or fire, do not open
the cover. Refer servicing to qualified service
personnel.
This mark indicates this unit belongs to class 1 laser
product. The laser beam may produce radiation harm to
the directly touching human body.
IMPORTANTNOTESIMPORTANTNOTES
Please read through the manual carefully before connection and
operation.
Do not open the cover or touch any internal components for non-
professional
Turn off the power when the unit is not being used. (Unplug the power
cord if the unit is not used for a long time) And keep the unit' plug in
easy-to-plug/unplug status in daily life for convenient use.
Don't expose this unit to direct sunlight. Keep away the heating
sources or equipments
Don't expose this unit to the rain or moisture.
Place the unit on a horizontal level. Keep the unit ventilated. Don't
block the heat hole. Overheat may cause malfunction.
C lean the cabinet with soft cloth. Detergent or alcohol is forbidden.
This book is only a guide for user`s operation, not a criterion for
configuration.
The apparatus shall not be exposed to dripping or splashing and that
no object filled with liquids, such as vases, shall be placed on the
apparatus.
For Your Attention
The lightning flash is intended to alert the user to the
presence of dangerous voltage within the product's
enclosure, and touching the inner parts may result in a
risk of electric shock to persons.
The exclamatory mark is intended to alert the user to
the presence of important operating instructions.
CLASS 1
LASER PRODUCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WarningWarning
-3-

-4-
Accessories
Accessories
A/V Cable
Remote controller
AM Antenna Speaker Connect Cable
FM Antenna
User Manual
User manual
Remote Controller Operation
Insert the batteries into the cell box. The remote controller
would work within 8 meters if facing the obverse face of the
unit /within 6 meters if facing the side of the unit and within 30
degrees at left or right side.
Take the battery out of the controller if it is not used for a long
time
This unit can play the following types of discs
Symbol Contents
Audio + Video
Audio + Video
Audio
DVD
Video-CD
VCD
CD-DA
COMPACT
DIGITAL VIDEO
VIDEO CD
Disc types
Electronic Photo
Kodak
Picture CD

Panel
-5-
FRONT PANEL
1 Standby
2 Headphone
3 Open /Close
4 Play/ Pause
5 Prev
6 Next
7 DVD/Radio
8 USB Port
9 Master Vol.
.
123456789

REAR PANEL
Panel
-6-
123456789
1 Speaker Output
2 Video Output
3 S-Video Output
4 Component Y, Cb/Pb, Cr/Pr
5 R/ L Audio Output
6 Coaxial Jack
7 FM Antenna
8 Power on/off
9 AMAntenna

Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Y
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component input
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component input
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component input
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component input
YCr/PrCb/Pb
Component video
output
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component input
YCr/PrCb/Pb
Component video
output
VIDEO
S-VIDEO
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component input
YCr/PrCb/Pb
Component video
output
VIDEO
S-VIDEO
Video system connection
S-Video
Notes:
The following video output available for this unit .
Usethe AV cable (yellow terminal) to connect composite video output
of this unitto the TV/monitor video input.
Usethe S-video cable to connect the s-video output of this unit to the
TV/monitor S-video input.
Use 3 -core AVcable to connect the component output terminals of this
unit to thecorresponding TV/monitor input.
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will
be affected.
Only the physical connection conforms to the video setting can
produce the normal picture (reference to the Video Setup in System
Setup).
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component input
YCr/PrCb/Pb
Component video
output
VIDEO
S-VIDEO
VIDEO
S-VIDEO
Video and
S-Video
-7-
Connection

-8-
The player has both analogue and digital audio output. The analogue
audio is two channel. The digital audio is outputted from the coaxial, and
sound quality is much better than the analogue audio.
Note:
The physical connection should come with audio output setup of this
unit. Please refer to Audio Setup in system setup.
2ch output
Use a pair of audio cable (red for right/white for left) to connect the
audio input of the TV or AV amplifier to the audio output of this unit.
Use thespecified coaxial cable to connect the coaxial output of this unit
to the coaxial input of power Amplifier
Coaxial Digital Audio
Audio system connection:
Speaker output
Connection
Use the specified cable(white+, black-) in the accessories to connect
this unit tothe input ofsound boxes.
Speaker
R L
DIGITALAUDIO
COAXIAL
COAXIAL
Coaxial Output
Digital Audio Input
RL
2CH Audio Output
-8-
The player has both analogue and digital audio output. The analogue
audio is two channel. The digital audio is outputted from the coaxial, and
sound quality is much better than the analogue audio.
Note:
The physical connection should come with audio output setup of this
unit. Please refer to Audio Setup in system setup.
2ch output
Use a pair of audio cable (red for right/white for left) to connect the
audio input of the TV or AV amplifier to the audio output of this unit.
Use thespecified coaxial cable to connect the coaxial output of this unit
to the coaxial input of power Amplifier
Coaxial Digital Audio
Audio system connection:
Speaker output
Connection
Use the specified cable(white+, black-) in the accessories to connect
this unit tothe input ofsound boxes.
Speaker
R L
DIGITALAUDIO
COAXIAL
COAXIAL
Coaxial Output
Digital Audio Input
RL
2CH Audio Output
-8-
The player has both analogue and digital audio output. The analogue
audio is two channel. The digital audio is outputted from the coaxial, and
sound quality is much better than the analogue audio.
Note:
The physical connection should come with audio output setup of this
unit. Please refer to Audio Setup in system setup.
2ch output
Use a pair of audio cable (red for right/white for left) to connect the
audio input of the TV or AV amplifier to the audio output of this unit.
Use thespecified coaxial cable to connect the coaxial output of this unit
to the coaxial input of power Amplifier
Coaxial Digital Audio
Audio system connection:
Speaker output
Connection
Use the specified cable(white+, black-) in the accessories to connect
this unit tothe input ofsound boxes.
Speaker
R L
DIGITALAUDIO
COAXIAL
COAXIAL
Coaxial Output
Digital Audio Input
RL
2CH Audio Output
2CH Audio Input
R L
TV/Monitor Input
DVD Output
Speaker output

System Setup
-9-
MENU OPERATION
Press [SETUP] button in the remote controller, the SETUP MENU (main) will
be displayed.
1. After accessing the [SETUP] Menu, press [ ]and [ ] buttons to select a
desired item, then press [ENTER] button to enter the sub-menu. In the submenu,
press [ ]and [ ] buttons to select the desired one, then press the [ENTER]
button to confirm.Now, setup of this current function is completed.
2. To end thesetup, press the[SETUP] button again. In the SETUPMENU, you
may choose anyof the following options as you like.
GENERAL SETUP PAGE:
This option is used to set up TV screen format, video function and DVD
function, with options of “TV DISPLAY”, , “ANGLE MARK”, “OSD
LANG”, “CLOSED CAPTIONS”, “SCREEN SAVER” and “LAST
MEMORY”.
TV Display
4:3 PAN SCAN: When the unit connects to the normal TV set, the wide-
screen image showson the full screen ,but some part is cut off.
4:3 LETTERBOX: When the unit connects to the normal TV set, the
wide-screen image shows and black bars appear on the top and bottom
of screen.
16:9: Use this itemwhen the unit is connected to the wide screen TV set.
Wide Squeeze: Use this item when the unit is connected to the wide
screen TV set.
ANGLE MARK:
When a DVD with multiple angles is used, you can select a particular shooting
angle.
OSD LANGUAGE:
You may use this item to set the language of the setup menu and screen display
language.
CLOSED CAPTIONS:
This function doesn’t work ifthe DVD hasn’t the closedcaption. If thecaptions is
OFF,press [SUBTITLE ]key on the remote controller to make caption on.

System Setup
-10-
SCREEN SAVER:
If the SCREEN SAVER is set ON and the unit is switched on without a disc
playing for several minutes, a moving picture appears on the screen, and the unit
will go to standby mode after 20 minutes. You can press [STANDBY] key on the
remote controller towake it up.
LAST MEMORY
When this function is on, the unit can memorize the time elapsed from the last
time you played the disc. When playing next time, it will resume playing from the
memorized time.
AUDIO SETUP PAGE:
ANALOG AUDIO SETUP:
DOWNMIX:
Use [ ] [ ] arrow button to movethe scroll to choose one.
LT/RT: The audio out is Left and Right channel format even if the original
sound is 5.1CHformat.
STEREO: The audio out format is stereo even if the original sound is 5.1CH
format.
SPDIF OFF: No digital output( coaxial off), only analog audio output .
ALL: If this item is selected, you can set up the RAW.
PCM ONLY: In SPDIF/PCM mode, setup PCM channel according to
your preference.
LPCM OUT :
Select PCM frequencyat 48kHz or96kHz.
Note: Some amplifiers don't support 96kHz sampling which will effect
the coaxial output.
.
DIGITAL AUDIO SETUP PAGE :
DIGITAL OUTPUT:

-11-
DOLBY DIGITAL SETUP:
Dual Mono:
Stereo: Set audio output to the stereo output.
L-mono: Set audio output to the mono-left channel.
R-mono: Set audio output to the mono-right channel.
Mix-mono: Set audio output to the Mix mono channel.
DYNAMIC:
Select this toreduce the overall volume and still keep defined audiosound.
VIDEO SETUP PAGE:
VIDEO OUTPUT:
OFF: Set video output to the composite.
YUV: Set video output in analog component video format when
connecting to Y/U/V terminals.
P-YUV: Set progressive YUV signals. Connection same as YUV.
System Setup
Note:: If the video setting differs from the physical connection, the TV set may be
without picture. In case of this, you can RESET the machine, then keep pressing
key [V_MODE] untilthe picture is OK again.

-12-
COLOR SETTING:
PREFERENCE SETUP:
TV TYPE:
This product supportsvarious system, includingNTSC and PAL.
If TV set has only NTSC or PAL system, screen will blink and become colorless
when a wrongsystem is selected.
For more information of output format, please refer to the instruction of your TV
set.
MULTI: The unit switches automatically accordingto the disc system.
NTSC: This system isused in USA,TAIWAN, JAPAN etc.
PAL: This system isused in CHINA,EUROPE, HONGKONG etc.
Note : If theTV TYPE is different from this setting,its imagine will have black and
white state for jumping.
COLOR SETTING includes: SHARPNESS, BRIGHTNESS, CONTRAST,
GAMMA, HUE, SATURATION and LUMA DELAY.
Adjust each itemin the Color Setting to get the suitable coloroutput of the TV
screen.
SHARPNESS: There are three optional output modes: HIGH\MEDIUM\LOW, can
press [enter] and
[ ]and [ ] direction keyto choose one.
BRIGHTNESS: Use the [ ] or [ ] arrow buttonto move the scroll and adjust the
brightness.
CONTRAST: Use the[ ] or [ ] arrow button to move the scroll and adjust the
contrast.
GAMMA: There are four optional output modes: HIGH\MEDIUM\LOW\NONE,can
press [enter] and
[ ]and [ ] direction keyto choose one.
HUE: Use the [ ] or [ ] arrow button to move the scroll and adjustthe hue.
SATURATION: Use the [ ] or [ ] arrow buttonto move the scroll and adjust the
saturation.
LUMA DELAY: Use the [ ] or [ ] arrow buttonto move the scroll to select one
choice: 0T or 1T.
System Setup

-13-
PBC: In the item,you can set it ON orOFF.
AUDIO, SUBTITLE and DISC MENU LANGUAGE SETUP:
These are the initial setting by your preference. If a setting is supported by disc
content, it will work. Otherwise disc default value works. And these setting can be
changed respectively bypressing key [AUDIO] and [SUBTITLE] whenplaying.
DEFAULT SETUP:
Resume to theinitial factory setup.
PASSWORD SETUP:
You can change the password. The initial factory password is 136900. You can
set your own password according to indication box in the screen . If you forget
your own password,you can use 136900 as general password.
PARENTAL FUNCTION :
This item isset for parents to control the playing content andprotect your
children from violenceand erotism. If the
level of thedisc is higher than the set level, it cannot be played.
System Setup

Play
-14-
Eject or loadthe disc tray
OPEN/CLOSE
Stand by/working modeswitch
STANDBY
Return to the top menu when playing DVD disc.
TITLE
Switch on or off PBC function.
PBC
V-MODE
Video output mode switch (if losing pictures or picture is
abnormal, keep switchinguntil you reach a clear picture.)
SOURCE
SELECT
AV Source switch among DVD/TUNER(AM/FM)
CH-LEVEL
The following isthe basic operation for this unit with the attached remote
controller.
Please note somefunction just isavailable for some disc.
Press this keyto select achannel then press VOLUME+/- to
adjust its level.
TONE Press [TONE], then press VOLUME+/- to control bass,
mediant and treble.
Press S.EFFECT button to change the surroundsound effect.
S.EFFECT

Play
-15-
When playing the disc with multi-subtitle, press SUBTITLE
continually to select the desired sub-title .
SUBTITLE
ANGLE
When playing VCD1.1, CD disc, after loading the disc, use
the digit key to select the desired track or chapter directly.
Press 10+ key and then another digit key to select the track
whose number is 10 or more.
You can press digit keys at PROGRAM and MENU
selection.
Insert U disc, and press USB button to switch to the USB
play state. Press arrow button to select the desired folder or
file, and press USB again to return to DVD play state.
USB
When playing the disc with multi-angle, it's convenient to
change the view angle.
Select the desiredaudio channel when playing DVD disc.
AUDIO
112233
445566
778899
10+10+
0/100/10
When playing the disc, press[ ]button once to pause, and
press[ ]button again to return to normal play.
When playing DVD, VCD or CD disc, press [ ]button once,
the unit will memorize the previous ending point. Press[ ]
button to go on the play. Press[ ]button for the second time
to stop the play andend memory.
Press VOLUME+ to adjust volume up
Press VOLUME- to adjust volume down
VOLUME

Press this button for quick forward search.
Press this button for quick rewind search.
When playing DVD disc, press PREV to the previous
chapter.
When playing SVCD, VCD or CD disc, press PREV to the
previous track.
When playing DVD disc, press NEXT to the next chapter.
When playing SVCD, VCD or CD disc, press NEXT to the
next track.
Press the digit key to input the number of the track, title or
chapter. If the programmed tracks are over ten, press NEXT
to go onprogramming. (Maximum 20programable items)
use the up/down/left/right key to move the cursor to the
START. Press ENTER to start PROGRAM play.
PROG If the disc is with 2 or more tracks, chapters or titles, set up
the playing order as your preference. Press this button to
enter program menu.
Play
-16-
MENU
Return to theprevious menu when playing DVD disc.
MUTE Press MUTE button, no sound will give out and the mute
symbol will display on the TV screen. Press MUTE again,
MUTE OFF will display and the sound will resume.