tech rc Explorer TR016W User manual

TR016W
Altitude HoldLow power returnHeadless modeOne key return Video Picture Multi-point Flight
Follow me
explorer
[email protected](America)
[email protected](Europe)
[email protected](Japan)
www.techrc.net
Table of Contents

1 2
Before using, please completely read this manual!
CAUTIONS
In order to make sure that it meets the requirement of the electromagnetic environment of the aviation radio
station, flying within the scope of 10 kilometers on each side by taking the airport runway center line as the
middle line is HIGHLY FORBIDDEN or flying within the scope of 20 kilometers by taking both ends of the
runway as the center is HIGHLY FORBIDDEN. Flying on the route of the airline is also PROHIBITED.
Stop using all kinds of flying models or unmanned Quad-rotors in the AREA that prohibited by related
authority or department of our country.
PREFACE
To make your experience with this drone as straightforward and convenient as possible, please read this
instructions for use carefully before operation. Keep it safe for future reference and to ensure continued,
safe and enjoyable use of your drone.
Important Statement
1. This product is not a toy, but a high precision drone that integrates various electronic stability and control
mechanisms. This drone requires careful and correct assembly and setup to ensure safe, accident free
operation. This equipment should be operated in a safe and controlled manner at all times. Incorrect or
dangerous operation may cause damage to the device or property, or cause serious injury to those in the
vicinity.
2. This product is suitable for experienced drone pilots over 14 years of age.
3. In case of having difficulties on any aspect of the product, operation or maintenance, please contact your
local sales agent or contact customer support here at tech rc.
Safety Guidelines
This product is flying camera that offers easy, controllable flight when in good working order, however, there
is also a significant risk to property and people if flown irresponsible or within confined spaces. Incorrect
assembly or poor control by inexperienced pilots can result in damage to property or harm to people in an
accident. Be fully aware of your surroundings when flying and always maintain complete control of the vehicle
at all times.
1. Keep Your Distance.
a. Always fly in locations that are clear of any obstructions, such as buildings, poles, electrical wires, trees
and so on.
b. Never fly above or near other people or spectators.
2. Do not fly in adverse weather conditions.
a. Keep clear of moisture, fog, ice and excessive wind.
b. Fly in good weather conditions only.
3. Use and maintain the product according to the instructions for use.
a. Operate this device legally in accordance with instructions provided and with local laws and regulations.
b. Always use original parts made by tech rc for maintenance and repair.
4. Do not operate the device alone.
a. If you are a new pilot, seek assistance from an experienced drone pilot as you learn.
b. Have others around to help you fly at all times.
5. Safety First every time.
a. Always operate the drone within your limits as a pilot. If you are ill, disoriented, or unsure of how to
effectively fly the drone, please seek help to avoid danger, damage or injury.
6. Keep clear of rotation parts.
a. During operation, the rotors revolve extremely quickly, please avoid contact with the propellers and
ensure that foreign objects are kept clear of all moving parts.
7. Avoid exposure to excessive heat.
a. Due to the numerous material types used in construction, this drone is not suitable for exposure to heat.
Please keep your device away from heat sources and avoid prolonged exposure to direct sunlight. High
temperatures can distort the structure of the device, please check for suck damage before flying.
1. The information and guidance within this package and instructions for use is important for the safe
operation and maintenance of your drone. Please keep it safe for future reference.
2. You accept sole responsibility for any injury, loss or damage that result from your operation of the device.
3. Always follow the instructions when assembling or operating the drone. Always keep at least 6 feet
between the user or viewers and the model to avoid risk of injury. Pay attention to the device at all times
while in flying.
4. Neither tech rc nor any distributors or agents accept any responsibility for loss, injury or damage caused
by incorrect operation of the drone.
5. This drone is not suitable for children under the age of 14. Younger pilots should always operate the drone
under the supervision of an adult.
6. Please ensure assembly instructions are followed correctly to ensure proper operation and performance
of your drone.
7. This product contains small parts. To avoid any choking hazard, please keep this drone and all its
components out of the reach of children.
8. You must not, under any circumstances, fly this drone over open water or near any public road which will
increase the risks of accidents.
9. Keep all packaging materials away from children and dispose them safely.
10. The internals of the drone are not user serviceable, please do not attempt to dissemble this drone or
replace any part of the drone, In order to avoid malfunctions during flight.
11. Please ensure batteries are fitted in the correct orientation as shown in these instructions.
12. You can access the transmitter battery compartment by unscrewing the screws on the battery cover.
Insert batteries ensuring they are in the right orientation. Always replace battery cover and tighten the
screw to secure before use.
13. Only use the charger provided with your drone for safety.
14. The charger is not a toy.
15. Dispose of used batteries carefully, do not litter.
16. The power socket must not be removed from this drone. Do not attempt to short-circuit the connection
socket.
17. When disposing of batteries, do not throw them into fire and leave them decomposed. Keep clear of
heat sources and high temperatures at all time.
18. If the device is not going to be used for an extended period, remove batteries to prevent potential damage
from battery leakage.
19. Care should be taken to keep your drone away from sources of magnetic interference of other electrical
equipment to prevent signal issues during operation.
20. Keep clear of rotating parts and beware of loose clothing that could become entangled in the rotors
causing injury.
21. Beware of the noise volume the drone produces. Keep your distance to avoid ear damage.
22.The charger socket uses a mini USB 5V connection.
23. Always use the product in compliance with local aviation radio rules and comply with local authorities
should they require you to refrain from operating at any time.
WARNINGS

1.Drone
34
Camera
LED Light
LED Light
LED Light
LED Light
Battery
Propeller
Clockwise
Propeller
Counterclockwise
Power switch
drone body
Battery release key
2. Transmitter
Left-hand accelerator (mode 2)
Throttle Joystick
Headless mode
Power switch
GPS switch
Follow mode
Areal Circulating mode
Direction Joystick
Left-right fine tuning
Front-back fine tuning
Package Contents
Propeller X 8
Transmitter
TR016W DRONE with Camera
Battery x 1
Screw driver X 1
Mobile phone clamp X 1
Screw X16
USB Charging Cable
Instruction for Drone and Transmitter
When the GPS function is activated, fine tuning function not works, and when the GPS function is not
activated, fine tuning function works.

5 6
Video
Video
High-middle-low
speed switch
One-key return
Photo
Photo
(meanwhile press down)
USB
Cellphone
charger Power bank Computer Car
charger
NOTE:For faster charging,it is recommended to use a
5V 2A AC Adapter(not enclosed)to charge the battery.
Charging the Battery
(meanwhile
press down)
LCD Display Icon Functions
1.GPS Indicator light
2.Return
3.Low power
4.Headless Mode
5.Compass Indicator light
Emergency stop
1. The transmitter uses four 1.5V/AA batteries. The positive and negative electrodes of the
battery cannot be reversed.
2.Please pull out the batteries if the transmitter isn’t used for a long time.
Notes:
Installation Method of Transmitter Batteries
Use a screwdriver to open the battery cover in anticlockwise rotation, install batteries to the battery box, lid
the battery cover, and lock the screw on battery cover.
The transmitter uses
four 1.5V/AA batteries.
1. Connect the drone batteries with USB charging cable, connect USB charging cable with any mode of
charging USB in the figure (give priority to 5V 2A charger for charging).
2. When batteries are charging, USB indicator’s red light is bright. When it is fully charged, indicator puts out.
The charging time is about 150min.
Drone Battery
One-key take off/
One-key landing
1.Failure to follow all the instructions may result in serious injury, irreparable damage to the battery and
may cause a fire, smoke or explosion.
2.Always check the battery’s condition before charging or using it.
3.Replace the battery if it has been dropped, or in case of odour, overheating, discolouration, deformation
or leakage.
4.Never use anything other than the approval LiPo charger the battery. Always use a balancing charger for
LiPo cells or a LiPo cell balancer. It is recommended that you do not to use any other charger than the
one provided with the product.
5.The battery temperature must never exceed 60°C(140°F) otherwise the battery could be damaged or
ignite.
6.Never charge on a flammable surface, near flammable products or inside a vehicle (perferably place
the battery in a non-flammable and non-conductive container).
7.Never leave the battery unattended during the charging process. Never disassemble or modify the
housing’s wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to
the voltage of the battery. Do not short circuit the batteries.
8. Never expose the LiPo battery to moisture or direct sunlight, or store it in a place where temperatures
could exceed 60°C(car in the sun, for example).
9.Always keep it out of reach of children.
10.Improper battery use may result in a fire, explosion or other hazard.
11.Non-rechargeable batteries are not to be recharged. Rechargeable batteries are only to be charged
under adult supervision.
12.Different types of batteries or new and used batteries are not to be mixed.
13.Batteries are to be inserted with the correct polarity.
14.The supply terminals are not to be short-circuited. Regular examination of transformer or battery charger
for any damage to their cord, plug, enclosure and other parts and they must not be used until the
damage has been repaired.
15.The packaging has to be kept since it contains important information.
16.The toy is only to be connected to Class II equipment bearing the symbol.
Fixed
Propeller
BATTERY WARNING:
1.Unscrew the small screw, pull out the propeller.
2.Unscrew the 2 small screws of the LED light cover, pull out the cover.
3.Hold up the tube, attach the correct propeller.
4.Keep the propeller in place, tight the small screw.
5.Put the LED light cover back and tight the 2 small screws back.
Please be careful to avoid falling the screw into the gap.
Replace and Attach the Propellers

7
Operating Guide
Important
It is necessary to ensure that the drone to be placed on a flat and level surface, because the
gyroscope inside the drone needs to be corrected with water level after power-on, then it could be
in controlled normally.
1. Insert the battery into the drone, and then press the Power Switch to turn on the drone. All the LED indicator
Lights on the drone begin to flash quickly.
3. Install the batteries for the transmitter and press the power button, one beep will be heard from the transmitter,
and all the LED indicators on the drone will turn to solid if the drone is paired successfully.
Calibration of the gyroscope
Simultaneously push the joysticks to the lower right corner to calibrate the gyroscope, when all the drone’s
indicator lights change from quick flash to solid lights, the gyroscope calibration is completed.
1. Simultaneously push the joysticks to the lower left corner to calibrate the compass.
2. All the drone’s indicator lights and the compass indicator light on the transmitter start flashing quickly.
3. Hold the drone in the air and cross rotate it like a shape of “∞”for about 3 times until you can hear a sound
like "beep" from the transmitter.
4. All the drone’s indicator lights turn to solid, the compass indicator light turns off, the compass calibration is
completed.
A. Pairing
2. Place the drone on a flat and level surface with the head forward and the tail towards the pilot. The head
side indicated with two green led lights, tail with two red led lights.
B. Calibrating the Gyro
C. Calibrating the Compass
8
Fly Safe
DO NOT use the drone in adverse weather conditions such as rain, snow, fog and wind speeds
exceeding 10 m/s or 22 mph.
No Fly Zone
Stay away from the rotating propellers
and motors.
Fly in Open Areas Strong GPS Signal Maintain Line
of Sight
Fly Below
400 feet (120 m)
Avoid flying over or near obstacles, crowds, high voltage power lines, trees,airport or bodies of water.
DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect
the onboard compass.
≥10m/s
It’s important to understand basic flight guidelines, for the safety of both you and those around
you. Don't forget to read the Safety Guidelines before flight.

Drone must be unlocked before fly, or it couldn’t be in control.Note:
E. Unlock/Lock the Motor
1. Place the drone on the flat and dry surface and in a unobstructed and lit area.
2. Waiting for the GPS signal to be connected automatically, this process can take about 30 to 80 seconds.
3. You will hear one beep from the transmitter, the GPS indicator light on the transmitter turns on, that shows
GPS is connected successfully.
D. GPS Connection
To unlock/lock the motor, simultaneously push the left stick to lower left corner and the right stick to lower right
corner, or simultaneously push the left stick to lower right corner and the right stick to lower left corner as shown
above. When the propellers rotate the drone is unlocked.
F. One-key Take off / Landing
One-key Take off/
One-key Landing
910
Forward
Left
Backward
Right
Propeller(A)
Clockwise
Propeller(A)
Clockwise
Propeller(B)
Counterclockwise
Propeller(B)
Counterclockwise
It will lock automatically after landing for security concern, and needs to be unlocked again
for flight.
Note:
Do NOT use this function at high altitude if there is no emergency, motors will lose power
immediately and lead to high altitude crash.
Note:
Video Photo
(Simultaneously
press down)
(Simultaneously
press down)
Camera
1. When throttle joystick is operated upward and
downward, the drone flies upward and downward
simultaneously.
Left/right steering
Rising-descending flight.
Left/right flight Forward/backward flight
- Press One-key Take off button, the drone will be automatically take off and hover at about 3-6 feet altitude.
- Press the button again, the drone will land on ground automatically.
G. Emergency Stop
Simultaneously press the “video” and “photo” buttons to stop the mid-flight drone immediately in emergency for
the sake of reduce the risk of damage or injury.
Additional Remarks before Flight
1. The camera direction on the drone body is the front direction of drone.
2. Check the direction of the propeller rotation after powered on. The left front/right rear propeller rotates
clockwise and the right front/left rear propeller rotates counterclockwise as shown below.
3. Download and install the APP to your phone or other devices first, pilot must read instructions details
before flight.
4. To ensure a better flight experience in the corresponding environment, it is necessary to operate the
drone following with the Operating Guide.
5. When you hear the alarm 'di.di.di' from the transmitter, it indicates that it has entered the first range of
low-voltage protection, the flight distance would be controlled in about 30 meters. When it gets into the
second range of low-voltage protection, the drone will returns to the original take-off position automatically.
Flight Control
2. When throttle joystick is operated in left and right
directions, the drone head flies in left and right
directions.
3. When direction joystick is operated in left and right,
the drone flies in left and right directions.
4. When direction joystick is operated upward and
downward, the drone flies forward and and
backward simultaneously.

11 12
High-middle-low
speed switch
(press down for once)
Headless mode
Follow mode
Follow
mode Follow mode
Areal Circulating
mode
Direction joystick
High-middle-low Speed Mode
The drone has three levels of speed:high-middle-low. Press down the throttle joystick on the transmitter, and
transmitter will give out di, didi and dididi, representing low, middle and high modes respectively(Default is
low speed mode. Middle speed mode is suitable for beginners and high speed mode is suitable for experts).
Headless Mode
Press the “HEADLESS” on the transmitter to enter Headless mode, the drone body’s lights flash quickly,
meaning to enter into the Headless mode.
Press again the “HEADLESS” on the transmitter to exit from Headless mode, the drone body’s lights are
normally on, and the drone exits from the Headless mode.
The flight direction control of the drone under the headless mode
Under Headless Mode, the forward direction is the direction the pilot faces where the pilot pairs the drone
with the transmitter.
The specific control is shown as follows:
1. If the pilot pushes the direction joystick forward the drone will fly forward. If the pilot pushes the direction
joystick backward, the drone will flight towards him/her.
2. If the pilot moves the direction joystick left or right, then the drone will also move left or right relative to you.
3. It is very important that the pilot does not change positions or the direction he or she is facing because this
will cause confusion on the drone.
Attentions:
Due to collision or long accumulated time of flight under headless mode, deviation may occur and interfere
flight control, in this case, you should recalibrate the drone.
Press transmitter’s Areal Circulating switch, and then drone enter into the Areal Circulating mode; if it requires
for the withdrawal mode, it only needs to move the direction joystick.
Areal Circulating Mode
Remarks: This function is only operated in the open site.
Follow Me Mode
1. Click the Follow mode on the transmitter .
2. The drone enters into the follow me mode; people hold the transmitter to move, and drone will slowly
move with it.
3. To exit Follow Me mode, simply click Follow mode again on the transmitter.
When the Follow Me Mode function is active, the drone will follow the GPS in your smartphone/transmitter
to follow you wherever you go.
Common Issues :
* Follow Me mode would be hardly activated if transmitter /phone’s GPS signal is too weak, this could be due
to the signal loss from surrounding buildings, trees, or congestion from too many mobile phones in the area.
* Use in open area and be mindful of your surroundings. Drone is NOT equipped with obstacle avoidance.
One-key Return
Press One-key return button,the transmitter gives out”di.di.di......”,one-key return indicator on the transmitter
will light up in green,the drone is returning. Press One-key return button again,drone canceled return.

13 14
High-middle-low
speed switch
One-key return
GPS switch
Throttle Joystick
Headless mode
Power switch
Direction Joystick
Left-right fine tuning
Front-back fine tuning
Video
Photo
One-key take off/
One-key landing
Memory card installation
Memory card
Video Photo
Camera angle adjustment
NOTICE: 1.This function only can work in GPS mode.
2.The one-key return function brings the drone back to the last recorded Home Point.But there
is a distance deviation of 1~2 meters.
3.When the Flight Battery level is low,the drone will fly back.
4.The drone will return if the signal to the transmitter is lost.
GPS Switch
Press GPS switch on the transmitter to exit GPS mode, Please exit GPS mode while operating indoor as
signal is weak. Turn on the drone and transmitter and press the GPS button once it is paired.
Assemble the Memory Card /Camera Angle Adjustment
1. Install the memory card: correctly insert SD card into SD card slot on the bottom; press it lightly,
insert SD card, and press it again to automatically pop up the SD card.(SD card does not include)
2. Camera of drone can be adjusted manually with the amplitude of 0°-35°;
As adjusting the lens, do not contact with the lens on the camera. Otherwise, it will affect
image quality.
Notice:
3. When the transmitter is connected with the drone, use a mobile phone to connect with WiFi signal to
enter into APP control interface; as taking a picture, press the key to Photo button for once; then,
mobile phone will give out a sound of “ka”, and it takes a picture. The picture is directly stored in
mobile APP file.
4. After the transmitter is connected with the drone, use the mobile phone to connect with the drone’s WiFi
signal to enter into APP control interface; as taking a video, press the video button; there is recording
time at the camera shooting icon in mobile phone; press video button to finish recording and maintain it in
the mobile phone file.
①
②
③
Mobile Phone Installation
1.Align the mobile phone clamp to the remote control and install it vertically in place.
2.Pull out the phone holder and lock the phone as shown below, adjusting the phone to avoid clipping
the phone buttons.

15 16
TECH RC GPS User Manual
1, Install app "TECH RC GPS" to mobile device.
Please scan following QR code to download app "TECH RC GPS" and install it, or search it in Apple Appstore
or Google Play through the app name "TECH RC GPS", then download and install it.
IOS Version Android(Google Play) Android (pgyer)
2, Connect to WiFi Camera.
a, Power on the Drone.
b, Press the setting button of your mobile device to search WiFi APP named "EXPLORER-xxxxx" and then
connect it,as pic 1
Gallery Support
?
Help
Enter device
Learn
V R
pic 3pic 2pic 1
3, Run the App"TECH RC GPS", Pic 2 should been shown in your mobile device.
APP Functions
Flip screen
VR split screen
Flight record
GPS signal
Flight setting
Drone battery
Photo
Video
Unlock
Album
Controls ON/OFF
Back to main menu
Follow me
One-key return
Auto take-off
Auto land
Speed(Meter/Sec.)
Height (Meters)
Distance (Meters)
D:00 H:00 DS:00 VS:00
Multi-point flight
Areal circulating mode
Record
V R
V R
Drone Status
Waiting for GPS Signal
Additional Instructions:
1. Pairing using transmitter is essential during first start-up, please do not pair with the APP alone.
2. Drone accepts commands from the transmitter only when the APP and transmitter are sending commands
simultaneously.
3. When the APP and transmitter are both on, basic flight operations(up down, left right, forward backward,
turn left or right)can be controlled by the transmitter only.
4. Switching control to APP alone in flight is critical. To switch it safely, the drone must be landed first, turn off
the drone and transmitter, then restart the drone and APP and pair again.
5. Only transmitter is available to control the drone during indoor flight, the APP couldn't control individually.
V R
VR

THE PROBLEMS
Drone flashes and don't
respond to the transmitter
during operation.
REASONS SOLUTIONS
1. Transmitter is not synced
to the drone.
2. Insufficient battery power.
1. Refer to the Manual and
re-sync the drone.
2. Recharge the battery.
The propellers spin, but
the drone cannot take-off.
1. Insufficient battery power.
2. The propellers are installed
in wrong orientation.
3.The propellers are distorted.
1. Recharge the battery.
2. Install the propellers in right
orientation.
3. Replace the propellers.
The drone shakes heavily. 1.The propellers are distorted.
2.Axle is bent.
1. Replace the propellers.
2. Replace the axle.
Drone cannot stay balanced
in flight even if adjust the tuning
button.
1. The propellers are distorted.
2. The motor doesn’t work
properly.
1. Replace the propellers.
2. Replace the motor.
Drone is unstable after
crashing.
The gyroscope loses it’s
balance after crashing.
Restart and re-calibrate the
drone.
Common Problems and Solutions
17
Accessories(additional purchase)
Available accessories are shown as follows. For convenient purchasing of customers, every part is listed
particularly. Customers can purchase accessories through local dealers.
18
●Drone
MODEL：TR016W
Weight (Including Battery) ：248g
Flight Time：15-18 minutes
WIFI Distance：300-400m（Outdoor And Unobstructed）
Motor Model：Coreless motor 1020
Hovering：Enabled
Operating Temperature Range ：32° to 104° F ( 0° to 40° C )
Satellite Systems GPS / GLONASS
●Camera
Lens：FOV 120°
Still Photography Modes：Single shot
Video Recording Modes：1920*1080 (SD card) / 1280*720 (smart phone)
Photo：JPEG
Video：AVI
Supported SD Cards：TF Card 64GB (not included)
Operating Temperature：32° to 104° F ( 0° to 40° C )
●Flight Battery
Capacity：1200 mAh
Voltage：7.4V
Battery Type：Lithium battery
Energy：8.88Wh
Net Weight：38 g /1.34oz
Max Charging Time：about 150 min(Depending on Charging Power)
Charging Temperature Range：14° to 104° F ( -10° to 40° C )
●USB Cable
Voltage：5V
Specifications:
TR016W-1
Upper shell cover Lower shell cover
TR016W-2 TR016W-3
Foot pad
TR016W-4
TR016W-5
Transmission gear
TR016W-6 TR016W-7
Motor cabinet
TR016W-8
TR016W-9 TR016W-10
Lampshade
TR016W-11 TR016W-12
Hollow steel tube
TR016W-13 TR016W-14
White light with plug cord
TR016W-15
USB charging cable5G camera plate
Propeller
Drone battery
TR016W-16
TR016W-17 TR016W-18
Mobile phone clampGPS module
Transmitter
Counterclockwise motor
(Black and white line)
Receiving panel
Clockwise motor
(Red and blue line)

19
[email protected](America)
[email protected](Europe)
[email protected](Japan)
For more further technical support, please do not hesitate to contact us
via Email.
FCC Notice:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device should be installed and operated with minimum distance 20cm between the radiator & your body.
FAA REGISTRATION: PLEASE FOLLOW ALL FEDERAL, STATE AND LOCAL FAA LAWS.
YOU MAY BE REQUIRED TO REGISTER YOURSELF AND YOUR DRONE WITH THE FAA
MORE INFO CAN BE FOUND
AT: HTTPS://WWW FAA GOV/UAS/GETTING STARTED/
After receiving the certificate of registration, you must mark your unique FAA registration number on the Drone
by any means, such as permanent marker, lable, engraving. This number must be readily accessible and
maintained in a condition that is readable and legible upon close visual inspection.
WARNING: Do NOT fly drone near airports or any other unauthorized areas.
Follow all rules for Federal Aviation Administration (FAA) regulation summary for Small Unmanned Aircraft
Systems (sUAS).
Read: Academy of Model Aeronautics (AMA) Know Before You Fly important information brochure.
General Information