Techko SG-818 User manual

HOW THE SOLAR POWERED LIGHT WORKS
WARNING & NOTICE
PRODUCT SPECIFICATION
Copyright Reserved
This product has a 1-year limited warranty. For further information, please visit our
website at
w w w. t ech k o g r o u p . co m
[e-mail]
Solar Spotli ght
Model: SG-818
USER MANUAL
Material Solar Panel
Waterproof
Performance IP65
4.52 X 2.95 inches / 1.5W
1* Solar Box
1* Spot Ligh t
1* Unit
1* User manual
Accessories
Solar Box
Size
Spot Light
Size
Unit
Size
8.75*7.5*20.0 inches
3.78*2.36*8.03 inches
4.72*3.15*8.46 inches
ABS / Resin
In the daytime the light will automatically turn off and begin to
charge the battery.
The solar panel has a photosensor to detect light. At night,
the light automatically turns on using the power stored
(you also can cover the solar panel with your hand to simulate
night made.）
Do not look directly at the LED light, or it may damage your eyes.
Do not attempt to disassemble or remodel the product. Any changes can
be dangerous and will void the warranty.
Keep the product away from flammable items,or explosion or injuries
may occur.
Switch OFF the product when it is not in use for a long period of time.
1-888-883-2456

Carefully read this manual before using the product.
Keep the manual with you for reference as needed.
Do not charge the solar light indoors or any place where direct sunlight
cannot reach the solar panel. Otherwise, the product will not charge
properly.
Charging time may vary depending on weather, temperature, and seasons.
Please keep the solar panel clean to make sure the product can properly
charge.
Frequently clean solar panel as needed. Avoid scratching on the panel or it
may lower charging efficiency.
Ensure that the soil where the spike is to be placed is soft enough
to insert to prevent any damage to the spike/pole when installing.
This can be done by adding water to the soil to help soften the
installation site or gently breaking up soil with a tool before installation.
PLEASE FULLY CHARGE THE PRODUCT BEFORE USING
How to Operate
Slide the ON/OFF switch located behind the solar panel to the left to turn
the unit to the ON position.
Adjust the solar panel and light using the adjustable knobs for optimal
positioning.
Connect Contact -01 to Contact -02. Secure the cover from Contact-01
by tw isting the cover onto Contact-02.
Slide the ON/OFF switch located behind the solar panel to the right to turn
the unit to the OFF position.
Adjust
(approximate 40 inches), to shine the unit.
the distance between of unit and spot light.
Sol a r Bo x
Contact-01
180°
Spot Light
Contact-02
40 inches
180°
Unit