Techly IDATA-HDMI-MX22 User manual

1. Source device:
Source device with HDMI output, such as set-top boxes, computers,
video recorders,etc.
2. Transmitter unit:
Transmitter unit that compliant to HDbitT transport protocol
3. Display device:
Display device with HDMI input, such as television, projector,
HD display,etc.
Panel description
1.Front panel：
1 2 3 4 5
① Power indicator
② Data transmission indicator
③ Connection indicator
④ Reset button
⑤ Mode button
user manual ×1pcs
3.5mm jack audio cables ×1pcs
4. UTP/STP cat5/5e/6 cable, follow standard IEEE-568B
Network cable length support between every connection:
CAT5 80m
CAT5e 100m
CAT6 120m.
Installation requirements
video wall controller unit ×1pcs power adapter（12V2A）×1pcs
1. Do not hot plug when it is working.
2. Use DC12V power supply only. Make sure specification
matched if using adapters not supplied by factory.
This is a HDbitT HDMI 2×2 configuration video wall controller,
with 1 HDbitT input(RJ45 port), and 4 HDMI outputs. It based on
advanced HDbitT technology, by working together with a HDbitT
transmitter,easy to divide and extend the input video to four same
size displays, and the extension distance is up to 120 meters via
CAT6. The supported resolution is up to full HD 1080p@60Hz.
1. Applied advanced HDbitT HD digital AV transmission protocol.
2. Extend HDMI signal up to 120 via CAT6 by working together with a
HDbitT transmitter.
3. With 4 HDMI outputs,divides the input video into four ports
and extend to four same size displays.
4. Resolution supported is up to 1080p@60Hz.
5. Support video wall screen mode and clone screen mode.
6. With 3.5mm audio output port, access to audio equipment easily
7. Plug and play.
8. Wall-mountable design, convenient for installation.
9. Support IR pass back function .
Package contents
Introduction
Features
Safety Notice:
①DC input（DC12V）
②HDbitT signal input
③Audio output
④HDMI signal outputs
2、 Back panel：
HDMI IN CAT5/5e/6
HDMI OUT
HDMI OUT
HDMI OUT
HDMI OUT
1 2 3 4
1. Network cable
Follow the standard of IEEE-568B:
1- Orange/white 2- Orange 3- Green/white
4- Blue 5- Blue/white 6- Green
7- Brown/white 8- Brown
Connection and Operation
2. Connection drawing
Audio OUT

U s e r M a n u a l
HDbitT HDMI 2×2 Video Wall Controller
FAQ
Q: Black screen or there is no any signal on HD displays?
A: 1) Please check the input resolution of source device, and make sure
the resolution can be supported by this video wall controller and
your HD display
2) Please check and make sure all the cables (HDMI cable,network
cable) are connected well.
Q: Display not fluent or stable？
A: 1) Press “RESET” button of the transmitter or this video wall
controller, reset and reconnect.
3. Connection instruction
1) Connect source device and HDbitT transmitter via HDMI cable
2) Connect HDbitT transmitter and this video wall controller unit
via networkcable under stander IEEE-568B
3) Connect video wall controller unit and four equally sized displays via
HDMI cable
4) Connect power supplies of all devices, and video wall
controller works
A
Display 1 Display 2
Display 3 Display 4
AA
AA
Display 1 Display 2
Display 3 Display 4
4、 Display Modes
Video Wall Screen Mode
（1）（2）
Clone Screen Mode
Disclaimer
The product name and brand name may be registered trademark of
related manufacturers.TM and ® may be omitted on the user manual.
The pictures on the user manual are just for reference, and there may be
some slight difference with the real products.We reserve the rights to
make changes without further notice to a product or system described
herein to improve reliability, function or design.
2) Use another cables to see if the device works well or not,and make
sure the cable is no longer than the disthance supported(CAT5-80m，
CAT5E-100m，CAT6-120m，HDMI cable :1 to 5 meters).
Transfer protocol
Transmission
distance
Power consumption
12V /2A
Product dimension
HDbitT
Weight
Power supply
Color
Working temperature 0-60℃
Input port
RJ45
Transmission rate
Output port
Video bandwidth 225Mpixels/s
Item
HDMI resolution
Description
HDMI signal
Black
HDMI1.3, Full compatible with HDCP1.2
HDMI typeA （Female）
480i@60Hz, 480p@60Hz，576i@50Hz，576p@50Hz，
720P@50/60Hz,1080i@50/60Hz,1080p@50/60Hz
Up to 120 meters transmission distance for 1080p@60HZ
Full HD over single CAT6
18Mbps
<18W
228x125.4x25mm
0.65Kg
Specification