Technaxx TX-199 User manual

1
TX-199, 5008, 09/22
Technaxx®* User Manual
3W Solar Power Station Set TX-199
With LED lamps
Before using the appliance for the first time, please read the instructions for use and
safety information carefully.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capacities, or by persons lacking in experience or
knowledge, unless they are supervised or instructed on the use of this device by a
person responsible for their safety. Children should be supervised to ensure they do
not play with this device.
Keep this user manual for future reference or product sharing carefully. Do the same
with the original accessories for this product. In case of warranty, please contact the
dealer or the store where you bought this product.
Enjoy your product. * Share your experience and opinion on one of the well-
known internet portals.

2
TX-199, 5008, 09/22
Table of Contents
Note .................................................... 2
Safety instructions .............................. 2
Features.............................................. 3
Product description ............................. 3
Prduct overview .................................. 4
First use .............................................. 4
LED indicator light............................... 4
LED front panel................................... 4
LED light bulb system ......................... 4
USB output.......................................... 5
Solar powered charging ...................... 5
Technical specifications ...................... 5
Support................................................ 5
Care and maintenance........................ 6
Declaration of Conformity ................... 6
Disposal .............................................. 6
Note
Only use the product for purposes due to its intended function Do not damage
the product. Following cases may damage the product: Incorrect voltage, accidents
(including liquid or moisture), misuse or abuse of the product, faulty or improper
installation, mains supply problems including power spikes or lightning damage,
infestation by insects, tampering or modification of the product by persons other than
authorized service personnel, exposure to abnormally corrosive materials, insertion of
foreign objects into the unit, used with accessories not preapproved. Refer to and
heed all warnings, precautions and safety instructions in the user manual.
Safety instructions
Read the operating instructions carefully. They contain important information on the
use, safety and maintenance of the device. Keep the operating instructions in a safe
place and pass them on to subsequent users if necessary. The device may only be
used for its intended purpose in accordance with these operating instructions. Do
not look directly into the LED light panel or direct the beam into the eyes of others to
avoid injury. Observe the safety instructions during use. Before commissioning,
check the device and its connecting cable as well as accessories for damage. Do not
use the device if it shows visible damage. Operate the device only from household
power sources. Check whether the mains voltage specified on the type plate
corresponds to that of your mains supply. Do not squeeze the power cord, do not
pull it over sharp edges or hot surfaces; do not use the power cord for carrying. If
the power cord of this device is damaged, it must be replaced by the manufacturer or
its customer service or a similarly qualified person in order to avoid hazards. The
appliance is intended for household or similar use only. It must not be used for
commercial purposes! Make sure that the device is well secured during operation
and cannot be tripped over by cables. Never use the device after a malfunction,
e.g., if the device has been dropped into water or damaged in any other way. The
manufacturer assumes no responsibility in the event of incorrect use resulting from
failure to follow the instructions for use. Modification or alteration of the product will

3
TX-199, 5008, 09/22
affect the product safety. Caution: Risk of injury! All modifications and repairs to the
device or accessories may only be carried out by the manufacturer or persons
expressly authorized by the manufacturer for this purpose. Make sure that the
product is operated from a power source that is easily accessible so that you can
quickly disconnect the device from the mains in case of an emergency. Never open
the product without authorization. Never carry out repairs yourself! Handle the
product with care. It can be damaged by shocks, impacts or falling from even a low
height. Keep the product away from extreme heat. Never immerse the product in
water or other liquids. Technical changes and errors excepted!
Features
•Backup power and light source in emergency situations
•3W polycrystalline solar panel for independent charging
•Bright LED panel at the device with 4 grade brightness
•USB port (max. 5V, max. 1A)
•LED bulbs with On/Off switch for external usage
•Rechargeable lead acid battery
Product description
This power station is used to charge small devices such as smartphones or radios,
for example, in emergency situations or camping.
The attached solar panel can charge the device independently of power sources by
the power of sunlight alone.
The attachable light bulb system and 3 pieces LED bulbs can illuminate your tent or
camping area.

4
TX-199, 5008, 09/22
Prduct overview
1
Power on / off device / LED
2
USB 5V / 1A output
3
Solar panel input 9V
4
Indicator LED
5
AC input 110V – 220V
6
Output LED bulbs
7
LED light
First use
Charge the battery with the AC charging cable by plugging it into the power station (5)
and a 110V-230V 50-60Hz AC outlet until the indicator LED (4) turns solid green. This
may take approximately 6-9 hours.
LED indicator light
The indicator LED (4) of the device shows the charging status of the device according:
Green steady light
Fully charged
Green slow flashing light
Sufficient battery
Orange slow flashing light
Low battery
Red slow flashing light
Power off soon
LED front panel
The power button (1) activates the LED front light (7) in different brightness modes
depending on how many times the power button is pressed, as follows:
1. Low brightness
2. Medium brightness
3. High brightness
4. Slight brightness
5.Turn off
LED light bulb system
Plug the cable of the three LED light bulbs into the LED bulb output (6) at the device
to power them. Each light bulb can be turned on and off separately with the switch at
the power cord of the bulb.
1
2
3
4
5
6
7

5
TX-199, 5008, 09/22
USB output
To charge devices via the USB output (2), plug your USB charging cable into the USB
port and connect the device to be charged to the USB charging cable.
Note: Charging may not support the full charging speed of your device as the output
is limited to 5V/1A.
Solar powered charging
Place the 3W solar panel in direct sunlight with the panel facing the sun for best
energy harvesting.
Insert the plug of the solar panel into the power station (3) to charge it. Charging time
varies greatly depending on weather and conditions.
Note: If you charge devices via USB or use the LED lights during solar charging, the
charging process may take longer.
Technical specifications
Solar panel
Max. 3W
Solar cable length
5 Meter
Power station battery
Rechargeable lead acid 6V / 4Ah SLA battery
Input voltage AC
110-230V 50-60Hz
Input voltage solar panel
Max. 9V
USB output
5V / 1A
LED bulb plug
6V hollow connector
LED bulb
4x LED / 6000K
LED bulb cable length
4 Meter
LED panel
8x LED /6000K
Charging time
6-9 hours (depending on solar charging or AC)
Working time
Up to 22 hours
Working temperature
-15°C – 40°C
Material
PC / PVC
Dimmension
(l) 172 x (w)126 x (h) 76mm
Weight
1.6 kg
Package content
TX-199 Powerstation, 3pcs LED bulbs, USB
charging adapter, AC charging cable, manual
Support
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks). Free Email:
[e-mail]
The support hotline is available Mon-Fri from 9am to 1pm & 2pm to 5pm

6
TX-199, 5008, 09/22
Care and maintenance
Clean the device only with a dry or slightly damp, lint-free cloth.
Do not use abrasive cleaners to clean the device.
Please avoid the following practice:
●Use the device in ultra-high or ultra-low temperature.
●Keep it or use it in moist environment.
●Use it in rainfalls or in water.
●Deliver or use it in strongly shocking environment.
Declaration of Conformity
The EU Declaration of Conformity can be requested at the following
address: www.technaxx.de/ (in the lower bar "Declaration of Conformity").
Disposal
Disposal of the packaging. Sort packaging materials by type upon
disposal.
Dispose of cardboard and paperboard in the waste paper. Foils should be
submitted for recyclables collection.
Disposing of old equipment (Applies in the European Union and other
European countries with separate collection (collection of recyclable
materials) Old equipment must not be disposed of with household waste!
Every consumer is required by law to dispose of old devices that can no
longer be used separately from household waste, e.g. at a collection point
in his or her municipality or district. This ensures that the old devices are
properly recycled and that negative effects on the environment are
avoided. For this reason, electrical devices are marked with the symbol
shown here.
Batteries and rechargeable batteries must not be disposed of in
household waste! As a consumer, you are required by law to dispose of
all batteries and rechargeable batteries, whether they contain harmful
substances* or not, at a collection point in your community/city or with a
retailer, to ensure that the batteries can be disposed of in an
environmentally friendly manner. * marked with: Cd = cadmium, Hg =
mercury, Pb = lead. Return your product to your collection point with the
fully discharged battery installed inside!

7
TX-199, 5008, 09/22
Made in China
Distributed by:
Technaxx Deutschland GmbH & Co. KG
Konrad-Zuse-Ring 16-18,
61137 Schöneck, Germany